05112 PP0641SA . . . engineered solutions for the transient environment™ UNIDIRECTIONAL THYRISTOR SURGE SUPPRESSOR APPLICATIONS ✔ SLIC Line Card ✔ DBX Branch Exchange Switches ✔ FCC Part 68 Customer Premise Equipment ✔ Line Interface Modem ✔ ISDN Architecture Interface IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - 95A, L4(Line-Gnd), 48A, L4(Line-Line) & 83A, L2(Power) DO-214AA DEVICE SYMBOL (UNIDIRECTIONAL) FEATURES ✔ Complies with: FCC Part 68, UL 1459, Bellcore 1089, ITU-K.20 & K.21 ✔ Peak Off-State Voltage: 58 Volts ✔ Surge Current Capability(See Table 1) ✔ ESD Protection > 40 kilovolts MECHANICAL CHARACTERISTICS ✔ Molded Plastic DO-214AA Package ✔ Weight 2.5 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Logo, Marking Code & Polarity Band or Notch on Top Surface TABLE 1 - SURGE RATINGS SERIES IPP 2 X 10µs AMPS IPP 10 X 1000µs AMPS ITSM 60 Hz AMPS SA 125 40 20 di/dt dv/dt AMPS/µs AMPS/µs (See Note 1) (See Note 1) 500 2000 Note 1: Critital Rate of Rise for On-State Current (di/dt) and Off-State Voltage (dv/dt). 05112.R1 5/02 1 www.protekdevices.com PP0641SA DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS ITSM 60 Amps Junction Temperature Tj -40 to 150 °C Storage Temperature T STG -55 to 150 °C Thermal Resistance(Junction) Rqja 28 °C/Watt Thermal Resistance(Ambient) Rqja 90 °C/Watt PARAMETER Surge Current - 50/60 Hz ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING CODE PP0641SA SWITCHING VOLTAGE MINIMUM HOLDING CURRENT (See Fig. 4) VDRM VOLTS @100V/µs VS VOLTS di/dt = 1A/ms IH mA 58 70 150 JD SWITCHING CURRENT FIGURE 1 PULSE WAVE FORM 100 IPP - Peak Pulse Current - % of IPP REPETITIVE PEAK OFF-STATE VOLTAGE Peak Value IPP MAXIMUM ON-STATE VOLTAGE (See Fig. 3) ON-STATE CURRENT TYPICAL CAPACITANCE IS mA @VDRM IDRM µA @IT VT VOLTS IT AMPS @50V, 1 MHz C pF 800 5 5 1.0 90 FIGURE 2 V-I CHARACTERISTIC CURVE TEST WAVEFORM PARAMETERS tf = 10µs td = 1,000µs tf MAXIMUM OFF-STATE CURRENT (See Fig. 3) IPP ITSM IT IS IH td = t I /2 PP VS 50 IDRM VT VDRM e-t 0 0 1 2 3 t - Time - µs 05112.R1 5/02 2 www.protekdevices.com PP0641SA FIGURE 4 TYPICAL PEAK OFF-STATE CURRENT VS JUNCTION TEMPERATURE 100 IT - On-State Current - A IDRM - Peak Off-State Current - µA 10 1 0.1 0.01 -40 1.15 0 40 80 tJ- Temperature - °C 10 1 0 120 FIGURE 6 TYPICAL NORMALIZED VS VS JUNCTION TEMPERATURE 2.5 1.1 FIGURE 5 TYPICAL ON-STATE CURRENT VS ON-STATE VOLTAGE 1 2 3 4 VT - On-State Voltage - V 5 6 7 FIGURE 7 TYPICAL HOLDING CURRENT VS JUNCTION TEMPERATURE 2 IH/IH (tJ 25°C) Normalized VS 1.05 1 0.95 1.5 1 0.9 0.5 0.85 0.8 -40 0 40 80 tJ- Temperature - °C 0 40 80 tJ- Temperature - °C 120 FIGURE 7 ON-STATE CURRENT VS SURGE CURRENT DURATION 100 Non-Repetitive On-State Current (ITSM) - Amps 0 -40 120 PPxxxxSA 10 1 1 05112.R1 5/02 10 100 Surge Current Duration - Full Cycles 3 1,000 www.protekdevices.com PP0641SA PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE DO-214AA (SMB) A DIMENSIONS B DIM A B C D E F G H C H G D E MILLIMETERS MIN MAX 1.96 3.30 4.06 2.00 0.76 5.21 0.10 0.15 2.21 3.94 4.57 2.62 1.52 5.59 0.20 0.31 INCHES MIN MAX 0.077 0.130 0.160 0.079 0.030 0.205 0.004 0.006 0.087 0.155 0.180 0.103 0.060 0.220 0.008 0.012 NOTES: 1. Dimensions are exclusive of mold flash and metal burrs. F 06030 Rev 0 - 4/02 TAPE & REEL PACKAGING: Surface mount product is taped and reeled in accordance with EIA-481, reel quantites and sizes are as follows: 7 Inch Reel - 3,000 pieces per reel; 13 Inch Reel - N/A ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05112.R1 5/02 4 www.protekdevices.com