DA108S1 DA112S1 ® Application Specific Discretes A.S.D.TM DIODE ARRAY APPLICATION Protection of logic side of ISDN S-interface. Protection of I/O lines of microcontroller. Signal conditioning. FEATURES ■ ■ ■ ARRAY OF 8 OR 12 DIODES LOW INPUT CAPACITANCE SUITABLE FOR DIGITAL LINE PROTECTION DESCRIPTION ARRAY of 8 or 12 diodes configured by cells of 2 diodes, each cell being used to protect signal line from transient overvoltages by clamping action. COMPLIES WITH FOLLOWING STANDARDS : IEC1000-4-22 level 4: 15kV (air discharge) 8kV (contact discharge) SO-8 FUNCTIONAL DIAGRAM : DA108S1 I/O 1 1 8 REF 1 I/O 2 2 7 REF 1 I/O 3 3 6 REF 2 I/O 4 4 5 REF 2 FUNCTIONAL DIAGRAM : DA112S1 August 2001 - Ed:4 I/O 1 1 8 REF 1 I/O 2 2 7 I/O 6 I/O 3 3 6 REF 2 I/O 4 4 5 I/O 5 1/5 DA108S1 / DA112S1 ABSOLUTE MAXIMUM RATINGS (Tamb = 25°C) Symbol VRRM IPP P Tstg Tj TL Parameter Repetitive peak reverse voltage (for one single diode) Repetitive peak forward current * 8/20 µs Power dissipation Storage temperature range Maximum operating junction temperature Maximum lead temperature for soldering during 10s. Value Unit 18 V 12 A 0.73 W - 55 to + 150 150 °C 260 °C * The surge is repeated after the device returns to ambient temperature THERMAL RESISTANCES Symbol Rth (j-a) Parameter Junction to ambient Value Unit 170 °C/W ELECTRICAL CHARACTERISTICS (Tamb = 25°C) Symbol VFP 2/5 Parameter Peak forward voltage IPP = 12A, 8/20 µs DA108S1 DA112S1 Max. Unit 9 12 V VF Forward voltage IF = 50 mA 1.2 V IR Reverse leakage current VR = 15V 2 µA DA108S1 / DA112S1 Fig.1 : Input capacitance VCC connected between REF1 and REF2 Input applied : DC bias + 950 mV(RMS) at 1 MHZ 36 C (pF) Typical values 34 VCC = 5 V VCC = 15 V 32 REF2 30 28 I/O 26 VCC G 24 22 0 REF1 2 4 6 8 10 12 14 16 DC bias (V) Fig.2 : Typical peak forward voltage characteristics (8/20µs pulse) VF (V) Typical values 2.0 1.8 1.6 Tj = 25 o C 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.001 0.01 0.1 I F (A) VF (V) 10.0 9.0 o Tj = 25 C 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 1 1 Typical values I F (A) 10 20 3/5 DA108S1 / DA112S1 APPLICATION 1 : ISDN Interface Protection Residual lightning surges at transformer secondary are suppressed by DA108S1 APPLICATION 2 : Microcontroller I/O port protection Vcc Vcc 4-6 bit input port I/O Vcc I/O µc Vcc I/O Vcc I/O DA1xx S1 IMPORTANT : DA108S1 must imperatively be connected to the reference voltages by REF1 and REF2. 4/5 DA108S1 / DA112S1 ORDER CODE DA1 08 S 1 RL Packaging: RL = Tape & reel = Tube Diode Array Number of diodes Package: SO-8 plastic Serial MARKING : Logo, Data Code, DA108S1 DA108S DA112S1 DA112S Packaging : Preference packaging is tape and reel. PACKAGE MECHANICAL DATA SO-8 (Plastic) DIMENSIONS REF. Millimetres Min. Typ. A a1 0.1 a2 Inches Max. Min. Typ. Max. 1.75 0.069 0.25 0.004 0.010 1.65 0.065 b 0.35 0.48 0.014 0.019 b1 0.19 0.25 0.007 0.010 C 0.50 c1 0.020 45° (typ) D 4.8 E 5.8 5.0 0.189 6.2 0.228 0.197 0.244 e 1.27 0.050 e3 3.81 0.150 F 3.8 4.0 0.15 0.157 L 0.4 1.27 0.016 0.050 0.6 0.024 M S 8° (max) Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2001 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 5/5