ETC TND938

05089
PMMAD
SERIES
. . . engineered solutions for the transient environment™
LOW CAPACITANCE STEERING DIODE ARRAYS
APPLICATIONS
✔ High Frequency Data Lines
✔ RS-232 & RS-422 Interface Networks
✔ Ethernet: 10 Base T
✔ Computer I/O Ports
IEC COMPATIBILITY (EN61000-4)
✔ 61000-4-2 (ESD): Air - 15kv, Contact - 8kv
✔ 61000-4-4 (EFT): 40A - 5/50ns
✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line)
SO-14
FEATURES
✔ 500 Milliwatt Continuous Power Dissipation
✔ ESD Protection > 40 kilovolts
✔ Designed for I/O Protection
✔ Working Voltage > 50 Volts
✔ LOW CAPACITANCE 5pF PER DIODE
MECHANICAL CHARACTERISTICS
✔ Molded JEDEC SO-14 Package
✔ Weight 0.15 grams (Approximate)
✔ Flammability Rating UL 94V-0
✔ 16mm Tape and Reel Per EIA Standard 481
✔ Marking: Logo, Date Code, Part Number & Pin Number 1 Indicated By DOT on Top of Package
APPLICATIONS DIAGRAM
+
I/O PORT
GND OR (-)
05089.R5 10/02
1
www.protekdevices.com
PMMAD
SERIES
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
PPK
500
Milliwatts
IF
400
mA
I FRM
700
mA
TJ
-55°C to 150°C
°C
TSTG
-55°C to 150°C
°C
Continuous Power Dissipation
Continuous Forward Current (Single Diode)
Repetitive Peak Forward Current @ tp=5µs, F=50kHz
Operating Temperature
Storage Temperature
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
FORWARD
PEAK PULSE
CURRENT
@8/20µs
I FM
MAXIMUM
FORWARD
VOLTAGE
@100mA
VF
MAXIMUM
CAPACITANCE
(Per Diode)
VOLTS
MAXIMUM
REVERSE
LEAKAGE
CURRENT
@40V
IR
µA
AMPS
VOLTS
pF
50
0.1
40
1.2
5
REPETITIVE
PEAK PULSE
VOLTAGE
@ 10µA
VRRM
See Note 1
@ 4V, 1 MHz
Note 1: Device types include: PMMAD1103, PMMAD1105, PMMAD1106 and PMMAD1109. Electrical characteristics apply to all device types.
FIGURE 1
PULSE WAVE FORM
IPP - Peak Pulse Current - % of IPP
120
tf
100
Peak Value IPP
80
e-t
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
60
40
td = t I /2
PP
20
0
0
05089.R5 10/02
5
10
15
t - Time - µs
2
20
25
30
www.protekdevices.com
PMMAD
SERIES
PIN CONFIGURATIONS
PMMAD1106
PMMAD1103
1
14
2
3
5
7
8
9
11
12
2
5
3
7
8
9
11
12
14
14 DIODE ARRAY
NC PINS 4, 6, 10 & 13
8 DIODE COMMON ANODE ARRAY
NC PIN 1, 4, 6, 10 & 13
PMMAD1105
PMMAD1109
14
2
3
5
7
8
9
11
12
8 DIODE COMMON CATHODE ARRAY
NC PINS 1, 4, 6, 10 & 13
05089.R5 10/02
7
8
5
4
3
2
1
8
9
10
11
12
13
14
7 ISOLATED DIODE ARRAY
(INDEPENDENT)
3
www.protekdevices.com
PMMAD
SERIES
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
SO-14
-A-
14
8
-B-
1
P
M B M
0.010” (0.25 MM)
7 PL
7
PACKAGE DIMENSIONS
DIM
DG
C
R X 45º
0º - 10º
-TK
M T B S
0.010” (0.25 MM)
F
J
A S
8 PL
MOUNTING PAD
0.050” TYP
0.160” ± 0.005”
A
B
C
D
F
G
J
K
P
R
MILLIMETERS
MIN
MAX
8.55
3.80
1.35
0.35
0.40
1.27 BSC
0.19
0.10
5.80
0.25
INCHES
MIN
MAX
0.386
10.00
0.393
0.150
4.00
0.157
0.054
1.75
0.068
0.014
0.49
0.019
0.016
1.25
0.049
1.27 BSC 0.05 BSC 0.05 BSC
0.008
0.25
0.009
0.004
0.25
0.009
0.229
6.20
0.244
0.010
0.50
0.019
NOTES:
1. - T - = Seating Plane and Datum Surface.
2. Dimensions “A” and “B” are Datum.
3. Dimensions “A” and “B” do not include mold
protrusions.
4. Maximum mold protrusion is 0.015” (0.380 mm)
per side.
5. Dimensioning and tolerances per ANSI Y14.5M,
1982.
6. Dimensions are exclusive of mold flash and metal
burrs.
0.030” ± 0.005”
0.245” MIN
0.045” ± 0.005”
06006 Rev 1 - 11/01
PART NUMBER SUFFIXES USED FOR TAPE & REEL/BULK ORDERING:
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix-T7 = 7 Inch Reel - 1,000 pieces per reel i.e.: PMMAD1103 - T7
Suffix-T13 = 13 Inch Reel - 2,500 pieces per reel i.e: PMMAD1103 - T13
No Suffix = Product Shipped in Tubes of 55 pcs per Tube
Protek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: [email protected]
Web Site: www.protekdevices.com
COPYRIGHT © ProTek Devices 2001
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing
engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
05089.R5 10/02
4
www.protekdevices.com