Product Information SAMSUNG SAMSUNGTFT-LCD TFT-LCD MODEL MODEL NO. NO. :: LTM190U1-L01 LTM190U1-L01 SAMSUNG ELECTRONICS CO. LTD. Doc.No. PI001_LTM190U1-L01 Page 1 /7 GENERAL DESCRIPTION DESCRIPTION LTM190U1-L01 is a color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching devices. This model is composed of a TFT LCD panel, a driver circuit and a backlight system. The resolution of a 19.0" contains 1600 x 1200 pixels and can display up to 16.7 million colors with wide viewing angle of 85 degrees or higher in all directions. (Vertical viewing angle : 170 degrees , Horizontal viewing angle : 170 degrees ) FEATURES • High contrast ratio, high aperture structure • APVA (Advanced Patterned Vertical Alignment) mode • Wide viewing angle • High speed response • UXGA ((1600x1200) pixels) resolution • Low power consumption • 2 dual CCFT (Cold Cathode Fluorescent Tube) • DE (Data enable) only mode. • LVDS (Low Voltage Differential Signaling) Interface (2 pixel / clock) APPLICATIONS • Workstation & desktop monitors • Display terminals for AV application products • Monitors for Industrial machine Doc.No. PI001_LTM190U1-L01 Page 2 /7 GENERAL INFORMATION ITEM SPECIFICATION UNIT Display area 386.4(H)X289.8(V) Driver element a-Si TFT active matrix Display colors 16.7M (true) colors Number of pixels 1600 x 1200 pixel Pixel arrangement RGB vertical stripe Pixel pitch 0.2415(H) x 0.2415(W) Display Mode Normally Black Surface treatment HAZE 25%, HARD-COATING (3H) NOTE mm mm Mechanical Information MIN. ITEM Module size MAX. NOTE Horizontal (H) 414.5 415.0 415.5 mm Vertical (V) 325.5 326.0 326.5 mm - - 26.5 mm - - 3,000 g Depth (D) Weight Doc.No. TYP. PI001_LTM190U1-L01 Page 3 /7 INPUT Interface Connection Connector : JAE FI-WE31P-HF PIN NO 1 SYMBOL FUNCTION GND Ground 2 3 A0M Negative LVDS differential data output 4 A0P Positive LVDS differential data output 5 A1M Negative LVDS differential data output 6 A1P Positive LVDS differential data output 7 A2M Negative LVDS differential data output 8 A2P Positive LVDS differential data output 9 10 Ground GND 11 CLKM Negative LVDS differential clock output 12 CLKP Positive LVDS differential clock output 13 A3M Negative LVDS differential data output 14 A3P Positive LVDS differential data output 15 GND Ground 16 17 A4M Negative LVDS differential data output 18 A4P Positive LVDS differential data output 19 A5M Negative LVDS differential data output 20 A5P Positive LVDS differential data output 21 A6M Negative LVDS differential data output 22 A6P Positive LVDS differential data output 23 GND Ground 24 25 A7M Negative LVDS differential data output 26 A7P Positive LVDS differential data output 27 NC Reserved 28 NC Reserved 29 NC Reserved 30 NC Reserved 31 NC Reserved Doc.No. PI001_LTM190U1-L01 Page 4 /7 BACK-LIGHT UNIT The backlight system is an edge - lighting type with 2 dual CCFTs. _ 2 oC Ta = 25 + ITEM SYMBOL MIN. MAX. UNIT NOTE Lamp Current IL 4.5 5.5 mArms (1) Lamp frequency FL 30 60 kHz (1) Note 1) Permanent damage to the device may occur if maximum values are exceeded Functional operation should be restricted to the conditions described under normal operating condition • side lamps HOT1 : (PINK) 1 LCD MODULE 2 3 A COLD : (WHITE) INVERTER (SK2400) • center lamps HOT1 : (PINK) 1 LCD MODULE 2 4 A COLD : (WHITE) INVERTER (SK2400) Doc.No. PI001_LTM190U1-L01 Page 5 /7 Connector : JST BHR - 03VS -1, JST BHR - 04VS -1 BACKLIGHT CONNECTOR PIN CONFIGURATION Pin NO. Input [ch1], [ch2] Color Function High Voltage 3-1-1 HOT Pink 3-1-2 N.C. - - 3-1-3 COLD White Ground 3-2-1 HOT Pink 3-2-2 N.C. - - 3-2-3 COLD White Ground 3-3-1 HOT Pink N.C. - - 3-3-4 COLD White Ground 4-1-1 HOT Pink 4-1-2 N.C. - - 4-1-3 COLD White Ground 4-2-1 HOT Pink 4-2-2 N.C. - 4-2-3 COLD White 4-3-1 HOT Pink N.C. - High Voltage High Voltage 3-3-2 3-3-3 High Voltage High Voltage Ground High Voltage 4-3-2 - 4-3-3 4-3-4 Doc.No. COLD White PI001_LTM190U1-L01 Ground Page 6 /7