ETC 84-536-11

Series 536 PLCC Test & Burn-in Zero
Insertion Force Sockets
FEATURES:
• A choice of several pin count devices can be inserted without bending or otherwise damaging the legs, since no
force is required to either insert or remove the
component from the socket.
• Compatible with pick and place operations.
• Corner posts provide positive package registration.
• Socket accepts JEDEC Types MO-047, MO-052, and other
ceramic, leadless or J-lead packages (shimms required).
SPECIFICATIONS:
• Socket body is black UL 94V-0 Glass-filled Polyphenylene
Sulfide (PPS).
• Contacts are Beryllium Copper Alloy 172.
• Contact plating is 12µ [.30µm] min. Gold per MIL-G-45204
over 50µ [1.27µm] min. Nickel per QQ-N-290.
• Hardware is Stainless Steel.
Note: Aries specializes in custom design and production. In addition to the stan• Contact current rating=1 Amp.
dard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to
• Contact resistance=30 mOhms max. (initial).
change product specifications without notice.
• Insulation resistance=1000 MOhms min.
• Dielectric strength=700 VAC cont. for 1 minute.
ORDERING INFORMATION
• Self inductance=8.9 ηH max. at 10 MHz.
• Operating temperature=-67°F to 338°F [-55°C to 170°C].
X X - 5 3 6 - 11
• Life cycle: 10,000 insertions minimum.
MOUNTING CONSIDERATIONS:
No. of pins
Gold over
• See Data Sheet No. 10007.
(see table )
Nickel plating
All tolerances ± .005 [.13]
Series
unless otherwise specified
Solder tail pin
ALL DIMENSIONS: INCHES [MILLIMETERS]
See Data Sheet No. 10007
for mounting considerations.
No. of
Pins
20
28
32
44
52
68
84
Dim. “A”
Dim. “B”
Dim. “C”
Dim. “D”
Dim. “E”
Dim. “F”
Dim. “G”
Dim. “H”
1.025 [26.04]
1.180 [29.97]
1.180 [29.97]
1.339 [34.01
1.500 [38.10]
1.654 [42.01]
1.890 [48.00]
1.454 [36.93]
1.605 [40.77]
1.583 [40.21]
1.772 [45.01]
1.920 [48.77]
2.343 [59.51]
2.580 [65.53]
1.993 [50.62]
2.207 [56.06]
2.160 [54.86]
2.400 [60.96]
2.596 [65.94]
3.050 [77.47]
3.360 [85.34]
1.025 [26.04]
1.180 [29.97]
1.180 [29.97]
1.339 [34.01
1.500 [38.10]
1.654 [42.01]
1.890 [48.00]
.761 [19.33]
.787 [19.99]
.725 [18.42]
.787 [19.99]
.820 [20.83]
.926 [23.52]
.926 [23.52]
.620 [15.75]
.690 [17.53]
.690 [17.53]
.787 [19.99]
.830 [21.08]
.906 [23.01]
1.063 [27.00]
1.256 [31.90]
1.180 [29.97]
1.380 [35.05]
1.339 [34.01]
1.700 [43.18]
1.654 [42.01]
1.890 [48.00]
1.454 [36.93]
1.520 [38.68]
1.495 [37.97]
1.673 [42.49]
1.821 [46.25]
2.244 [57.00]
2.480 [62.99]
http://www.arieselec.com • info@arieselec.com
NORTH AMERICA
Frenchtown, NJ USA
TEL: (908) 996-6841
FAX: (908) 996-3891
UK/IRELAND/GB
TEL: +44 870 240 0249
FAX: +44 1653 600493
uking@arieselec.com
EUROPE/MAINLAND/HOLLAND
TEL: +31 78 615 94 65
FAX: +31 78 615 43 11
10006
europe@arieselec.com
REV.A
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED