ETC C8114-04

Series C81/C91 Standard Dual Beam
Wire Wrap Edge-Grip Sockets
FEATURES:
•Dual beam, edge-grip contacts provide high retention with
positive wiping action.
•Removable cover provides lower profile.
•Side-to-side stackable.
SPECIFICATIONS:
•Body is black UL 94V-0 Glass-filled Thermoplastic Polyester
(PBT).
•Dual beam contact is Grade A Phosphor Bronze Alloy, 1/2
hard.
•Contact plating is either 50-150m [1.27-3.81mm] min. Tin
per MIL-P-81728 or 10m [.25mm] min. Gold per MIL-G45204 over 50m [1.27mm] min. Nickel per QQ-N-290.
•Contact current rating=1.5 Amp.
•Contact resistance=20 mOhms initial.
•Insulation resistance=100 MOhms @ 500 VDC per
MIL-STD-1344, method 3003.1.
•Dielectric withstanding voltage=1000 VAC.
•Operating temperature=221°F [105°C] Tin plating,
257°F [125°C] Gold plating.
•Solderability: MIL-STD-202, method 208 less heat aging.
•Accepts leads up to .011 x .018 ± .003 [.28 x .46 ± .08]
or .021 [.53] diameter.
•Accepts leads .100-.200 [2.54-5.08] long with cover.
MOUNTING CONSIDERATIONS:
•Suggested PCB hole size=.046± .002 [1.17 ± .05] dia.
ALL
DIMENSIONS: INCHES [MILLIMETERS]
Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change
product specifications without notice.
ORDERING INFORMATION
CXXXX-XX
Socket series
Pin plating:
91=Gold
81=Tin
No. of pins
(see table)
C81 series:
-04=closed entry
-54=open entry
C91 series:
-00=closed entry
-50=open entry
All tolerances ± .005 [.13]
unless otherwise specified
CONTACT DETAIL
No. of Pins
8
14
16
18
20
22
24
28
36
40
Dim. “A”
.465 [11.81]
.765 [19.43]
.865 [21.97]
.965 [24.51]
1.065 [27.05]
1.180 [29.97]
1.280 [32.51]
1.480 [37.59]
1.880 [47.75]
2.080 [52.83]
Dim. “B”
.300 [7.62]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.700 [43.18]
1.900 [48.26]
NORTH AMERICA
http://www.arieselec.com • [email protected]
Frenchtown, NJ USA
TEL: (908) 996-6841
FAX: (908) 996-3891
Centers “C”
.300 [7.62]
.300 [7.62]
.300 [7.62]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.600 [15.24]
.600 [15.24]
.600 [15.24]
.600 [15.24]
Dim. “D” (max)
.400 [10.16]
.400 [10.16]
.400 [10.16]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.700 [17.78]
.700 [17.78]
.700 [17.78]
.700 [17.78]
UK/SCANDINAVIA/IRELAND
Milton Keynes, GB
TEL: +44 1908 260007
FAX: +44 1908 260008
Dim. “E”
--.300 [7.62]
.400 [10.16]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.500 [12.70]
.800 [20.32]
.800 [20.32]
EUROPE (MAINLAND)
Papendrecht, Holland
TEL: +31 78 615 94 65
FAX: +31 78 615 43 11
12003
REV.A
Similar pages