ETC 9970-4XXX-08

1307066
Patent Pending
•
•
•
•
•
Solderless Cable Termination
3mm Mated Height
Excellent Cable Retention
Usable With Flexible and Semi-Rigid Micro-Coaxial Cables
Tape and Reel Packaging
M/A-COM’s revolutionary SMT|QuickGrip™ product line is designed to
meet the growing demand for a reliable, low cost system for direct termination of coax to a printed circuit board (PCB). SMT|QuickGrip™ technology eliminates the requirement to connectorize the coaxial cable,
reducing assembly times and, therefore, cost. The SMT|QuickGrip™
surface mount device occupies less PCB area than conventional
through hole coaxial connectors. An innovative microstrip mounting
pattern and cable receptacle design ensures excellent grounding and
PCB retention. The SMT|QuickGrip™ cable termination system stands
a mere 3mm off the board when mated, allowing for closer pitch/spacing
when designing a system. The SMT|QuickGrip™ provides optimal cable
retention for applications where shock, vibration, and/or cable flexure
may be encountered. This unique RF design accepts both flexible and
semi-rigid micro-coaxial cables while delivering exceptional RF performance up to 3GHz.
6.4 REF
.250
These features make this system extremely versatile for design engineers and offer a reliable, cost effective alternative to direct soldering of
cable to the PCB. The cable is inserted into the device by means of a
simple self-aligning hand tool, eliminating the requirement for skilled personnel. This system removes the possibility of damaged PCBs and
cables which are common quality issues associated with direct solder,
while providing superior RF performance. The SMT|QuickGrip™ accommodates multiple cable insertions allowing easy replacement of cables
for repairs. This receptacle is designed for high volume assembly using
surface mount technology and is available in tape and reel packaging for
pick and place board assembly. Pre-stripped cables and inter-series
cable pigtails are available as turnkey solutions for your application
needs (i.e.: for use in multi-board applications, for connecting antennas
to the PCB, or point to point transmission on the same PCB).
CABLE CONDUCTOR
CABLE DIELECTRIC
3.0 REF
.120
PWB
3.0 REF
.120
2.1 REF
.083
PWB
1.3
1.26
VSWR
The SMT|QuickGrip™ cable termination system is ideal for wireless
surface mount applications in handsets, pagers and personal digital
assistants (PDA). The SMT|QuickGrip™ mechanical and electrical
performance, coupled with its ease of use, ensure it to be a high quality,
reliable solution for current and future interconnect needs. M/A-COM is
an ISO9001 certified manufacturer and maintains an SPC controlled
manufacturing environment. Please call your local Sales or Distribution
office for additional information and qualification samples today.
3.2 REF
.120
CABLE JACKET
CABLE BRAID
1.22
1.18
1.14
1.1
0.3
0.6
0.9
1.2
1.8
2.1
2.4
2.7
3
FREQUENCY (GHz)
Note: Unless otherwise specified, all dimensions are mm/in.
Typical VSWR using SMT|QuickGrip™ with Omni-Flex 200 Cable
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
Specifications
Requirement
Detail
General
Materials
Housing:
Contacts:
Polyphenylene Sulfide
Copper Alloy
Finishes
Contacts:
Gold Plate over Nickel
Electrical
Frequency Range:
Impedance:
Insertion Loss:
DWV:
VSWR:
DC - 3GHz
Usable with 50 & 75 Ohm systems
.08 ƒGHz
750 VRMs
1.3:[email protected] 3GHz (Omni-Flex 100, 200 and .047 Semi-Rigid)
1.4:1 @ 3GHz (.034 Semi-Rigid)
Mechanical
Connector Durability:
Tape and Reel Packaging:
Force to Disengage by
Cam-Out (grams):
5 mating cycles min. (receptacle only)
16mm per EIA-481
Omni-Flex 100 Omni-Flex 200 .034 Semi-Rigid .047 Semi-Rigid -
469 typical
543 typical
852 typical
1066 typical
Environmental
Temperature Rating:
Resistance to Solder Heat:
-40°C(-40°F) to 105°C(221°F) when mated with PVC cable
-40°C(-40°F) to 125°C(257°F) when mated with Teflon cable
Infrared, convection, and vapor phase solderable (receptacle
only). Maximum reflow time/temperature not to exceed 260°C
for 3 minutes.
Cable Information
Materials:
Jacket:
Shield:
Dielectric:
Center Conductor:
Minimum Bend Radius:
Insertion Loss (PVC
and FEP cable only):
Center Conductor
Resistance:
Omni-Flex 100 (OSMT)
Omni-Flex 200 (SSMT)
PVC Flexible Cable (105°C)
Polyvinyl Chloride
Silver plated copper wire,
38 AWG, 90% min. coverage
PFA or FEP
Silver Plated Copper Clad Steel, 30 AWG
9.5mm (.375 inch)
FEP Flexible Cable (200°C)
Fluorinated Ethylene Propylene
Silver plated copper wire,
44 AWG, 90% min. coverage
PTFE (Polytetrafluoroethylene)
Silver Plated Copper Clad Steel, 30 AWG
6.35mm (.250 inch)
0.4 dB/ft., 1.3dB/m @ 500 MHz
0.6 dB/ft., 2.0dB/m @ 1 GHz
0.9 dB/ft., 3.0dB/m @ 2 GHz
0.4 dB/ft., 1.3dB/m @ 500 MHz
0.5 dB/ft., 2.0dB/m @ 1 GHz
0.9 dB/ft., 3.0dB/m @ 2 GHz
.26 Ohms per foot average
.26 Ohms per foot average
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
Product Offering
Part Number
PICK AND PLACE
FEATURE
CENTER CONTACT
3.2
.125
GROUND
CONTACT
0.5
.020
6.4
.250
Description
2318-0000-54
2399-5011-54
2399-5012-54
Bulk Packaged 100/bag
700 Piece Reel
2000 Piece Reel
7.8
.305
0.5
.020
3.0
.120
4.3
.169
2 PLCS
CENTER CONTACT
TERMINAL
3.4
.135
9.0 3.4
.354 .133
∅ 0.5 VIA
0.6
2 .024
PLCS
2.4
.095
1.3
.050
2.4
.096
0.6
.025
1.3
.050
.020
5 PLCS
1.5
.058
1.3
.050
GROUND PAD
1. Printed wiring board material: glass epoxy FR-4 or similar,
relative permitivity: 4.8, 1 oz. copper clad both sides.
2. These dimensions valid for 1.6 (.062) board thickness.
1.3
.050
3.8
.150
CIRCUIT LINE
2.5
.100
1 OZ COPPER
.0014
AREA FREE OF
SOLDER MASK
Recommended Mounting Pattern for Microstrip Line
Cable Insertion Tool
2598-5438-54
Assembly Procedure
1. Place cable outer conductor
on ground terminal with cable
dielectric touching shoulder of
block.
2. Place tool into guide slots of
terminal block making sure
cable figure on tool is facing in
right direction and tool is
square to block.
3. With tool push cable into
ground terminal and contact
terminal at the same time.
Note: Unless otherwise specified, all dimensions are mm/in.
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
Cable Assemblies
Inter-Series Cable Assemblies
Omni-Flex 100 (OSMT Cable)
Omni-Flex 200 (SSMT Cable)
9970-4XXX-01
9970-4XXX-02
9970-4XXX-03
9970-4XXX-04
9970-4XXX-05
9970-4XXX-06
9970-4XXX-07
9970-4XXX-08
9970-4XXX-09
9980-4XXX-01
9980-4XXX-02
9980-4XXX-03
9980-4XXX-04
9980-4XXX-05
9980-4XXX-06
9980-4XXX-07
9980-4XXX-08
9980-4XXX-09
Connector Type
SMA Straight Plug
SMA Bulkhead Jack
SMB Straight Plug
SMB Bulkhead Jack
SMB Right Angle Jack
OSX Straight Plug
OSX Bulkhead Jack
OSX Right Angle Plug
50 Ohm Coaxial Contact
Receptacle (#8)
1. To order, replace XXX in part number with cable length in millimeters (ie: 9970-4100-05 would be an Inter-Series Pigtail
with an SMB Right Angle Jack 100mm long). Cables should be ordered in 5mm increments.
2. Cable length tolerances:
Length ‘A’ mm (In)
50 to 100mm (3.94)
101 to 500mm (3.98 to 19.69)
Over 500 (19.69)
Tolerance mm (In)
±3 (± .12)
±5 (± .20)
±10 (± .39)
Note: Unless otherwise specified, all dimensions are mm/in.
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
Cable Assemblies
Pre-Stripped Cables
Omni-Flex 100 (OSMT Cable)
Omni-Flex 200 (SSMT Cable)
Description
9970-1XXX-23
9980-1XXX-23
Pre-stripped Omni-Flex
Cables for use with
SMT|QuickGrip™
.034 Semi-Rigid
.047 Semi-Rigid
Description
9921-1XXX-23
9922-1XXX-23
Pre-stripped Semi-Rigid
Cables for use with
SMT|QuickGrip™
1. To order, replace XXX in part number with cable length in millimeters (ie: 9970-4100-05 would be an Inter-Series Pigtail
with an SMB Right Angle Jack 100mm long). Cables should be ordered in 5mm increments.
2. Cable length tolerances:
Length ‘A’ mm (In)
50 to 100mm (3.94)
101 to 500mm (3.98 to 19.69)
Over 500 (19.69)
Tolerance mm (In)
±3 (± .12)
±5 (± .20)
±10 (± .39)
Note: Unless otherwise specified, all dimensions are mm/in.
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
Application Notes
Packaging
•
•
•
•
Bulk packed or packaged in plastic carrier tape on a reel
Available on 700 piece or 2000 piece plastic reel
Sealed plastic carrier tape in accordance with EIA-481-1
Conductive anti-static tape material to prevent static charge entry to
electronic assembly or equipment
• Recommended max. storage temperature of plastic carrier tape: 40°C
(140°F), 50% relative humidity max.
1.8
.069
16.0
.630 REF
2.0 REF
.079
4.0
.157REF
8.0
.315
REF
7.5
.295
COVER TAPE REF
( 0.3 MAX THK)
.012
3.3
.131 REF
CENTER CONTACT
TERMINAL REF
2318-0000-54
∅ 1.5
.059
7.7 REF
.304
0.4 MAX
.016
EMBOSSED CARRIER
TAPE REF
Figure 1
SMT|QuickGrip™ Surface Mount Plug Receptacle
Automatic Placement
The SMT|QuickGrip™ surface mount plug receptacle is compatible with industry
standard automatic placement equipment utilizing pneumatic (vacuum) part pickup. SMT|QuickGrip™ plug surface mount receptacles have been approved for use
with Fuji pick and place equipment. Pneumatic nozzles with diameters ranging
from 0.76mm - 1.07mm may be used for internal pick-up. Vacuum nozzle
configuration may vary depending on equipment utilized. Typical configuration
follows:
PICK & PLACE AREA FOR
0.76-1.07mm DIA X 50.8mm LG
NOZZLE
∅ 1.0 REF
.040
1.4 REF
.054
1.5 REF
.060
2.0 REF
.080
SMT QuickGrip™
INTERNAL PICKUP
Figure 2
Typical Pneumatic Nozzle
Nozzle vacuum should be 15-30 inches hg.
Component placement pressure should not exceed 400g.
Note: Unless otherwise specified, all dimensions are mm/in.
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
Application Notes
Soldering
SMT|QuickGrip™ plug receptacles are designed for reflow soldering processes.
Flow (wave) soldering is not appropriate for this device.
The type of solder paste selected for reflow soldering is generally a function of
many factors relative to the overall system PCB design. Most applications will use
common electronic grade solders such as: 63/37, 60/40 or 62/36/2 with mild
rosin/resin fluxes. Metal content of the paste for screen and/or stencil applications
is generally 85-90% by weight, slightly lower for nozzle dispensing applications.
When screening or stenciling, soldering paste thickness of .15mm (.006 inch) to
.25mm (.010) is recommended.
TEMP °C
REFLOW
20 - 40 SEC
AT 235°C TYP.
240 - 250°C MAX
250
200
150
100
50
PREHEAT
SOLDER
FLUX MELT/ACTIVATION
PASTE
SOLDER SPHERE MELT BEGINS
CURE
60 - 90 SEC AT 100 - 200°C
30-60 SEC
50-100°C
AMBIENT OR
FORCED
COOL DOWN
Figure 3
Typical Infrared and Convection Heating/Soldering Profile
TEMP °C
250
REFLOW
20 - 90 SEC
AT 215°C
200
150
100
50
10 - 30 MIN
AT
80 - 130°C
PREHEAT
30 - 180 SEC
AT 110 - 150°C
AMBIENT
OR
FORCED
COOL DOWN
Figure 4
Typical Vapor Phase Heating/Soldering Profile
Post-Solder Cleaning
SMT|QuickGrip™ Plug receptacles can withstand most electronics grade
cleaning agents including: high temperature water/aqueous cleaners, ethanol,
methanol, MEK, acetone, 1,1,1-tricloroethane, trichlordethylene, perchloroehtylene,
chloroflorocarbon (CFC) solvents, isopropanol, dichlorofluoroethane, and blends.
The Omni-Flex cables can also withstand mild exposure to the above listed
cleaning agents.
Note: Unless otherwise specified, all dimensions are mm/in.
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
AMP Business Centers, Worldwide
www.amp.com
www.macom.com
Americas
Related Businesses
Argentina – Buenos Aires
Chile – Santiago
Phone: + 54-1-733-2000
Fax: + 54-1-717-0988
Phone: + 56-2-236-4267
Fax: + 56-2-235-0061
Brazil – Sao Paulo
Phone: + 55-11-861-1311
Fax: + 55-11-861-0397
Columbia – Bogata
Phone: + 57-1-369-0045
Fax: + 57-1-269-7525
Canada – Toronto
Mexico – Mexico City
Phone: + 1-905-475-6222
Fax: + 1-905-474-5520
Phone: + 52-5-398-76-11
Fax: + 52-5-398-79-64
United States – Harrisburg, PA
Phone: + 1-717-564-0100
Fax: + 1-717-986-7575
For Latin/South American
Countries not shown
Phone: +54-1-733-2015
Fax: +54-1-733-2083
Asia/Pacific
Australia – Sidney
Phone: + 61-2-9840-8200
Fax: + 61-2-9899-5649
Malaysia – Kuala Lampur
India – Bangalore
New Zealand – Auckland
Phone: + 64-9-634-4580
Fax: 64-9-634-4586
Singapore – Singapore
Peoples Republic of China
Taiwan – Taipei
Phone: + 886-2-704-4815
Fax: + 886-2-704-4940
Phone: + 603-705-3055
Fax: + 603-705-3066
Phone: + 91-80-845-3014
Fax: + 91-80-845-3038
Indonesia – Jakarta
Phone: + 6221-526-7852
Fax: + 6221-526-7856
Hong Kong
Phone: + 852-2-35-1628
Fax: + 852-2-35-0243
Shangha
Phone: + 86-21-6485-0602
Fax: + 86-21-6485-0728
Shunde
Phone: + 86-765-7751368
Fax: + 86-765-7752823
Japan – Tokyo
Phone: + 81-44-844-8111
Fax: + 81-44-812-3207
Korea – Seoul
Phone: + 82-3274-0535
Fax: + 82-3274-0524
M/A-COM Division
Americas
Lowell, MA, USA
Phone: + 1- 978-442-5000
Fax: + 1-978-442-5354
Europe/Middle East/Africa
Bracknell, England
Phone: + 44-1344-869-595
Fax: + 44-1344-300-020
Asia/Pacific
Hong Kong
Phone: + 85-2-2111-8088
Fax: + 85-2-2111-8087
Philippines – Manila
Phone: + 632-811-0437
Fax: + 632-811-0441
Phone: + 65-482-0311
Fax: + 65-482-1012
Thailand – Bangkok
Phone: + 91-662-513-9888
Fax: + 91-662-513-9889
Vietnam – Ho Chi Minh City
Phone: + 84-8823-2546
Fax: + 84-8823-1443
Europe/Middle East/Africa
Austria – Vienna
Inside:
Phone: + 0222-277-97-0
Fax: + 0222-270-26-61
Outside: Phone: + 43-1-277-97-0
Fax: + 43-1-270-26-61
Belgium – Brussels
Phone: + 32-2-719-2511
Fax: + 32-2-725-4928
Bulgaria – Sofia
Phone: + 359-2-971-2152
Fax: + 395-2-971-2153
Croatia – Zagreb
Phone: + 385-1-67-04-46
Fax: + 385-1-69-16-04
Czech Republic – Kurim
Phone: + 420-5-41-162-111
Fax: + 420-5-41-162-223
Denmark – Viby
Phone: + 45-86-295-055
Fax: + 45-86-295-133
Egypt – Cairo
Phone: + 202-417-76-47
Fax: + 202-419-23-34
Estonia – Tallinn
Phone: + 372-6205-800
Fax: + 372-6205-804
Finland – Helsinki
Phone: + 358-9-512-3420
Fax: + 358-9-512-34250
France – Pontoise
Phone: + 33-1-34-20-88-88
Fax: + 33-1-34-20-86-00
Germany – Langen
Great Britain – London
Phone: + 44-181-954-2356
Fax: + 44-181-954-6234
Romania – Bucharest
Phone: + 40-1-311-3479/3596
Fax: + 40-1-312-0574
Greece – Athens
Russia
Phone: + 30-1-902-5515
Fax: + 30-1-902-4237
Moscow
Phone: + 7-095-926-5506/07/08/09
Fax: + 7-095-926-5505
Holland – ’s-Hertogenbosch
Phone: + 31-73-624-6246
Fax: + 31-73-621-2365
Hungary – Budapest
Phone: + 36-1-344-2633
Fax: + 36-1-344-2634
Ireland – Dublin
Phone: + 353-1-820-3000
Fax: + 353-1-820-9790
Israel – Tel Aviv
Phone: + 972-3-645-07-07
Fax: + 972-3-649-24-13
Italy – Torino
Phone: + 39-11-4012-111
Fax: + 39-11-4031-116
Lithuania – Vilnius
Phone: + 370-2-231402
Fax: + 370-2-231403
Norway – Oslo
Phone: + 47-66-77-88-50
Fax: + 47-66-77-88-55
Poland – Warsaw
Phone: + 48-22-672-47-90/91/92
Fax: + 48-22-672-47-88
Portugal – Lisbon
Phone: + 351-1-387-70-16
Fax: + 351-1-387-71-72
Phone: + 49-6103-709-0
Fax: + 49-6103-709-223
St. Petersburg
Phone: + 7-812-325-3083
Fax: + 7-812-326-3288
Slovakia – Bystrica
Phone: + 421-88-761-120/121
Fax: + 421-88-761-122
Slovenia – Ljubljana
Phone: + 386-61-161-3270
Fax: + 386-61-161-3240
South Africa – Johannesburg
Phone: + 27-11-805-65-35
Fax: + 27-11-805-65-40
Spain – Barcelona
Phone: + 34-3-291-0330
Fax: + 34-3-201-7879
Sweden – Stockholm
Phone: + 46-8-580-833-00
Fax: + 46-8-580-194-70
Switzerland – Steinach
Phone: + 41-71-447-0447
Fax: + 41-71-447-0444
Turkey – Istanbul
Phone: + 90-212-281-8181
Fax: + 90-212-281-8184
For Middle East/African
Countries not shown
Phone: +33-1-34-20-83-83
Fax: +33-1-34-20-86-09
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
V3.00