MILITARY DATA SHEET Original Creation Date: 03/15/96 Last Update Date: 07/30/96 Last Major Revision Date: 03/15/96 MN54F160A-X REV 1A0 SYNCHRONOUS PRESETTABLE BCD DECADE COUNTER General Description The F160A is a high-speed synchronous decade counter operating in the BCD (8421) sequence. It is synchronously presettable for application in programmable dividers and has two types of Count Enable inputs plus a Terminal Count output for versatility in forming synchronous multistage counters. The F160A has an asynchronous Master Reset Input that overrides all other inputs and forces the outputs LOW. The F160A is a high speed version of the F160. Industry Part Number NS Part Numbers 54F160A 54F160ADMQB 54F160AFMQB 54F160ALMQB Prime Die M160A Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F160A-X REV 1A0 Features - Synchronous Counting and Loading High-Speed Synchronous Expansion Typical Count Rate of 120 MHZ 2 MILITARY DATA SHEET MN54F160A-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) ESD Last Passing Voltage (Min) 4000V Note 1: Note 2: Absolute Maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F160A-X REV 1A0 Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input High Current VCC=5.5V, VM=7.0V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS 100 uA 1, 2, 3 IIL Input LOW Current MR, CP, CEP, Pn VCC=5.5V, VM=0.5V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS -0.6 mA 1, 2, 3 IIL2 Input LOW Current CET, PE VCC=5.5V, VM=0.5V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS -1.2 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIH=2.0V, IOL=20mA, VINH=5.5V, VIL=0.8V, VINL=0.0V 1, 3 OUTPUTS 0.5 V 1, 2, 3 VOH Output HIGH Voltage VCC=4.5V, VIL=0.8V, IOH=-1.0mA, VIH=2.0V, VINH=5.5V, VINL=0.0V 1, 3 OUTPUTS 2.5 V 1, 2, 3 IOS Short Circuit Current VCC=5.5V, VINH=5.5V, VM=0.0V, VINL=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA, VINH=5.5V 1, 3 INPUTS -1.2 V 1, 2, 3 ICC Supply Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 3 VCC 55 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINL=0.0V, VINH=5.5V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 AC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS tpLH(1) Propagation Delay CP to Qn PE=(High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 3.5 7.5 ns 9 tpLH(1) Propagation Delay CP to Qn PE=(High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 3.5 9.0 ns 10, 11 tpHL(1) Propagation Delay CP to Qn PE=(High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 3.5 10.0 ns 9 tpHL(1) Propagation Delay CP to Qn PE=(High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 3.5 11.5 ns 10, 11 tpLH(2) Propagation Delay CP to Qn PE=(LOW) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 4.0 8.5 ns 9 tpLH(2) Propagation Delay CP to Qn PE=(LOW) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 4.0 10.0 ns 10, 11 tpHL(2) Propagation Delay CP to Qn PE=(LOW) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 4.0 8.5 ns 9 4 MILITARY DATA SHEET MN54F160A-X REV 1A0 Electrical Characteristics AC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS tpHL(2) Propagation Delay CP to Qn PE=(LOW) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 4.0 10.0 ns 10, 11 tpLH(3) Propagation Delay VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 CP to TC 5.0 14.0 ns 9 2, 4 CP to TC 5.0 16.5 ns 10, 11 2, 4 CP to TC 5.0 14.0 ns 9 2, 4 CP to TC 5.0 15.5 ns 10, 11 2, 4 CET to TC 2.5 7.5 ns 9 2, 4 CET to TC 2.5 9.0 ns 10, 11 2, 4 CET to TC 2.5 7.5 ns 9 2, 4 CET to TC 2.5 9.0 ns 10, 11 2, 4 MR to Qn 5.5 12.5 ns 9 2, 4 MR to Qn 5.5 14.0 ns 10, 11 2, 4 MR to TC 4.5 10.5 ns 9 2, 4 MR to TC 4.5 12.5 ns 10, 11 5 Pn to CP 5.0 ns 9 5 Pn to CP 5.5 ns 10, 11 5 Pn to CP 2.0 ns 9 5 Pn to CP 2.5 ns 10, 11 5 PE to CP 11.0 ns 9 5 PE to CP 13.5 ns 10, 11 tpHL(3) tpLH(4) tpHL(4) tpHL(5) tpHL(6) ts(H/L)(1) th(H/L)(1) ts(H)(2) Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Setup Time (HIGH or LOW) Hold Time or Low) Setup Time (High) (High VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 MILITARY DATA SHEET MN54F160A-X REV 1A0 Electrical Characteristics AC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL PARAMETER ts(L)(2) Setup Time (Low) CONDITIONS NOTES VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C PINNAME MIN MAX UNIT SUBGROUPS 5 PE to CP 8.5 ns 9 5 PE to CP 10.5 ns 10, 11 th(H)(2) Hold Time (High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 PE to CP 2.0 ns 9, 10, 11 th(L)(2) Hold Time (Low) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 PE to CP 0 ns 9, 10, 11 ts(H)(3) Setup Time (High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 CEP or CET to CP 11.0 ns 9 5 CEP or CET to CP 13.0 ns 10, 11 5 CEP or CET to CP 5.0 ns 9 5 CEP or CET to CP 6.0 ns 10, 11 ts(L)(3) Setup Time (Low) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C th(H/L)(3) Setup Time (High or Low) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 CEP or CET to CP 0 ns 9, 10, 11 tw(H)(1) Pulse Width (High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns 5 CP 5.0 ns 9, 10, 11 tw(L)(1) Pulse Width (Low) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns 5 PE=(LOW 5.0 ) ns 9, 10, 11 tw(H)(2) Pulse Width (High) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns 5 CP 4.0 ns 9 5 CP 5.0 ns 10, 11 5 PE=(Hig 6.0 h) ns 9 5 PE=(Hig 8.0 h) ns 10, 11 tw(L)(2) Pulse Width (Low) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns tw(L)(3) Pulse Width (Low) VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns 5 MR 5.0 ns 9, 10, 11 tREC Recovery Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 MR to CP 6.0 ns 9, 10, 11 fMAX Maximum Count Frequency VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C, TR/TF=1.0ns 5 CP 100 MHz 9 5 CP 75 MHZ 10, 11 Note 1: Note 2: Screen tested 100% on each device at +25C, +125C & -55C temperature, subgroups A1,2, 3, 7 & 8. Screen tested 100% on each device at +25C temperature only, subgroup A9. 6 MILITARY DATA SHEET MN54F160A-X REV 1A0 (Continued) Note 3: Note 4: Note 5: Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and periodically at +125C & -55C temperature, subgroups 10 & 11. Guaranteed but not tested. (DESIGN CHARACTERIZATION DATA) 7