MILITARY DATA SHEET Original Creation Date: 05/31/96 Last Update Date: 07/30/96 Last Major Revision Date: 05/31/96 MN54F646-X REV 1A0 OCTAL TRANSCEIVER/REGISTER WITH TRI-STATE OUTPUTS General Description This device consist of bus transceiver circuits with TRI-STATE, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the A or B bus will be clocked into the registers as the appropriate clock pin goes to a high logic level. Control G and direction pins are provided to control the transceiver function. In the transceiver mode, data present at the high impedance port may be stored in either the A or the B register or in both. The select controls can multiplex stored and real-time (transparent mode) data. The direction control determines which bus will receive data when the enable control G is Active LOW. In the isolation mode (control G HIGH), A data may be stored in the B register and/or B data may be stored in the A register. Industry Part Number NS Part Numbers 54F646 54F646DMQB 54F646FMQB 54F646LMQB Prime Die M646 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F646-X REV 1A0 Features - Independent Registers for A and B Buses Multiplexed Real- Time and Stored Data Choice of True and inverting Data Paths 3-State Outputs 300 mil Slim Package 2 MILITARY DATA SHEET MN54F646-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0 mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) ESD Last Passing Voltage (Min) 4000V Note 1: Note 2: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F646-X REV 1A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input HIGH Current VCC=5.5V, VM=7.0V 1, 3 INPUTS 100 uA 1, 2, 3 IBVIT Input HIGH Current VCC=5.5V, VM=5.5V 1, 3 I/O PINS 1.0 mA 1, 2, 3 IIL Input LOW Current VCC=5.5V, VM=0.5V 1, 3 INPUTS -600 uA 1, 2, 3 VOLB Output LOW Voltage VCC=4.5V, VIL=0.8V, IOLB=48mA, VIH=2.0V 1, 3 OUTPUTS .55 V 1, 2, 3 VOH3 Output HIGH Voltage VCC=4.5V, VIL=0.8V, VIH=2.0V, IOH3=-3.0mA 1, 3 OUTPUTS 2.4 V 1, 2, 3 VOHB Output HIGH Voltage VCC=4.5V, VIL=0.8V, IOHB=-12.0mA, VIH=2.0V 1, 3 OUTPUTS 2.0 V 1, 2, 3 IOSB Short-Circuit Current VCC=5.5V, VOUT=0.0V 1, 3 OUTPUTS -100 -225 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA 1, 3 INPUTS -1.2 V 1, 2, 3 ICCH Supply Current VCC=5.5V 1, 3 VCC 135 mA 1, 2, 3 ICCL Power Supply Current VCC=5.5V 1, 3 VCC 150 mA 1, 2, 3 ICCZ Power Supply Current VCC=5.5V 1, 3 VCC 150 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINL=0.0V, VINH=5.5V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 IOZH Output Leakage Current VCC=5.5V, VIH=2.0V, VM=2.7V 1, 3 OUTPUTS 70 uA 1, 2, 3 IOZL Output Leakage Current VCC=5.5V, VIH=2.0V, VM=0.5V 1, 3 OUTPUTS -650 uA 1, 2, 3 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS tpLH(1) tpHL(1) Propagation Delay CPBA or CPAB to An or Bn VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C Propagation Delay CPBA or CPAB to An or Bn VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C 4 2, 4 2.0 7.0 ns 9 2, 4 2.0 8.5 ns 10, 11 2, 4 2.0 8.0 ns 9 2, 4 2.0 9.5 ns 10, 11 MILITARY DATA SHEET MN54F646-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpLH(2) tpHL(2) tpLH(3) tpHL(3) tpZH(1) tpHZ(1) tpZL(1) tpLZ(1) tpZH(2) PARAMETER CONDITIONS NOTES Propagation Delay An or Bn to Bn or An VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C Propagation Delay An or Bn to Bn or An VCC=5.0V @ 25C, -55/125C Propagation Delay SBA or SAB to An or Bn VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C Propagation Delay SBA or SAB to An or Bn VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C Enable Time VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C Disable Time Enable Time Disable Time Enable Time VCC=4.5V & 5.5V @ VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C 5 PINNAME MIN MAX UNIT SUBGROUPS 2, 4 1.0 7.0 ns 9 2, 4 1.0 8.0 ns 10, 11 2, 4 1.0 6.5 ns 9 2, 4 1.0 8.0 ns 10, 11 2, 4 2.0 8.5 ns 9 2, 4 2.0 11.0 ns 10, 11 2, 4 2.0 8.0 ns 9 2, 4 2.0 10.0 ns 10, 11 2, 4 OE to An or Bn 2.0 8.5 ns 9 2, 4 OE to An or Bn 2.0 10.0 ns 10, 11 2, 4 OE to An or Bn 1.0 7.5 ns 9 2, 4 OE to An or Bn 1.0 9.0 ns 10, 11 2, 4 OE to An or Bn 2.0 8.5 ns 9 2, 4 OE to An or Bn 2.0 10.0 ns 10, 11 2, 4 OE to An or Bn 1.0 7.5 ns 9 2, 4 OE to An or Bn 1.0 9.0 ns 10, 11 2, 4 DIR to An or Bn 2.0 8.5 ns 9 2, 4 DIR to An or Bn 2.0 10.0 ns 10, 11 MILITARY DATA SHEET MN54F646-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpHZ(2) tpZL(2) tpLZ(2) PARAMETER Disable Time Enable Time Disable Time CONDITIONS NOTES VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C PINNAME MIN MAX UNIT SUBGROUPS 2, 4 DIR to An or Bn 1.0 7.5 ns 9 2, 4 DIR to An or Bn 1.0 9.0 ns 10, 11 2, 4 DIR to An or Bn 2.0 10.0 ns 9 2, 4 DIR to An or Bn 2.0 12.0 ns 10, 11 2, 4 DIR to An or Bn 2.0 10.0 ns 9 2, 4 DIR to An or Bn 2.0 12.0 ns 10, 11 ts(H/L) Setup Time HIGH or LOW An or Bn to CPAB or CPBA VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C 5 5.0 ns 9, 10, 11 th(H/L) Hold Time HIGH or LOW An or Bn to CPAB or CPBA VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C 5 1.5 ns 9 5 2.5 ns 10, 11 tw(H/L) Pulse Width HIGH or LOW VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C 5 CPAB or 5.0 CPBA ns 9, 10, 11 fMAX Maximum Clock Frequency VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C 5 90 ns 9 5 75 ns 10, 11 Note 1: Note 2: Note 3: Note 4: Note 5: Screen tested 100% on 3, 7 & 8. Screen tested 100% on Sample tested (Method Subgroups A1, 2, 3, 7 Sample Tested (Method periodically at +125C Guaranteed parameter, each device at -55C, +25C & +125C temperature, Subgroups A1, 2, each device at +25C temperature only, Subgroup A9 . 5005, Table 1) on each MFG. lot at +25C, +125C & -55 C temp., & 8. 5005, Table 1) on each MFG. lot at +25C Subgroup A9, & & -55C temp., Subgroups 10 & 11. Not tested. 6