Revised July 2001 DM7406 Hex Inverting Buffers with High Voltage Open-Collector Outputs General Description Pull-Up Resistor Equations This device contains six independent buffers each of which performs the logic INVERT function. The open-collector outputs require external pull-up resistors for proper logical operation. Where: N1 (IOH) = total maximum output high current for all outputs tied to pull-up resistor N2 (IIH) = total maximum input high current for all inputs tied to pull-up resistor N3 (IIL) = total maximum input low current for all inputs tied to pull-up resistor Ordering Code: Order Number Package Number Package Description DM7406M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow DM7406N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y=A Input Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level © 2001 Fairchild Semiconductor Corporation DS006496 www.fairchildsemi.com DM7406 Hex Inverting Buffers with High Voltage Open-Collector Outputs December 1986 DM7406 Absolute Maximum Ratings(Note 1) Supply Voltage Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. 7V Input Voltage 5.5V Output Voltage 30V 0°C to +70°C Operating Free Air Temperature Range Storage Temperature Range −65°C to +150°C Recommended Operating Conditions Symbol Parameter Min Nom Max 4.75 5 5.25 Units VCC Supply Voltage VIH HIGH Level Input Voltage VIL LOW Level Input Voltage 0.8 VOH HIGH Level Output Voltage 30 V IOL LOW Level Output Current 40 mA TA Free Air Operating Temperature 70 °C V 2 V 0 V Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions VI Input Clamp Voltage VCC = Min, II = −12 mA ICEX HIGH Level VCC = Min, VO = 30V VOL Output Current VIL = Max LOW Level VCC = Min, IOL = Max Output Voltage VIH = Min Min Typ (Note 2) Max −1.5 V 250 µA 0.7 IOL = 16 mA, VCC = Min Units V 0.4 II Input Current @ Max Input Voltage VCC = Max, VI = 5.5V 1 IIH HIGH Level Input Current VCC = Max, VI = 2.4V 40 µA IIL LOW Level Input Current VCC = Max, VI = 0.4V −1.6 mA ICCH Supply Current with Outputs HIGH VCC = Max 30 48 mA ICCL Supply Current with Outputs LOW VCC = Max 27 51 mA Min Max Units 15 ns 23 ns mA Note 2: All typicals are at VCC = 5V, TA = 25°C. Switching Characteristics at VCC = 5V and TA = 25°C Symbol tPLH tPHL Parameter Conditions Propagation Delay Time CL = 15 pF LOW-to-HIGH Level Output RL = 110Ω Propagation Delay Time HIGH-to-LOW Level Output www.fairchildsemi.com 2 DM7406 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 3 www.fairchildsemi.com DM7406 Hex Inverting Buffers with High Voltage Open-Collector Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 4