ETC HSMD-S660

High Performance Surface Mount
Chip LEDs
Technical Data
SunPower Series
HSMx-S660 Series
HSMx-S670 Series
HSMx-S690 Series
Features
Description
• High Brightness AlInGaP
Material
• Industry Standard 2.00 x
1.25 mm Package
• Industry Standard 1.6 x 0.8
mm (Low Profile) Package
• Right Angle Package
• Three Colors Available
• Diffused Optics
• Compatible with IR Solder
Process
• Available in 8 mm Tape on
7” (178 mm) Diameter Reels
These chip-type LEDs utilize
aluminum indium gallium
phosphide (AlInGaP) material
technology. The AlInGaP material
has a very high luminous
efficiency, capable of producing
high light output over a wide
range of drive currents. The 590
nm amber, 605 nm orange, and
626 nm red colors are available
in three compact, low profile
packages.
Applications
• Keypad Backlighting
• LCD Backlighting
• Symbol Backlighting
• Front Panel Indicator
The HSMx-S670 is the industry
standard 2.0 x 1.25 mm package,
and is an excellent all around
package. The HSMx-S690 is the
industry standard 1.6 x 0.8 mm
package. Its low 0.7 mm profile
and wide viewing angle make this
LED excellent for backlighting
applications. The HSMx-S660
right angle, 3.0 x 2.0 x 1.0 mm
LED is optimum for side lighting
applications where direct backlighting is not practical.
All packages are compatible with
IR and convective reflow soldering processes.
Device Selection Guide
Footprint
(mm) [1][2]
Amber
590 nm
Orange
605 nm
Red
626 nm
1.6 x 0.8 x 0.7
HSMA-S690
HSMD-S690
HSMC-S690
2.0 x 1.25 x 0.8
HSMA-S670
HSMD-S670
HSMC-S670
3.0 x 2.0 x 1.0
HSMA-S660
HSMD-S660
HSMC-S660
Notes:
1. Dimensions in mm.
2. Tolerance ± 0.1 mm unless otherwise noted.
2
Package Dimensions
0.1
0.8 +
- 0.05
1.25
ANODE
ANODE
0.7
0.8
0.3
0.2
0.40
0.35
(0.13)
(0.28)
2.0
1.3 1.2
1.2 1.1
1.6
1
3
2
CATHODE
MARK
0.35
0.40
POLARITY
MARK
CATHODE
HSMx-S670 Series
2
1
3
CATHODE
MARK
CATHODE
HSMx-S690 Series
3.0
1
1.0
0.3
0.3
FRONT VIEW
2.0
R0.8
2
2.0
3
1.0
TOP VIEW
0.25
0.25
(0.88)
CATHODE
ANODE
R0.45
PIN CONNECTION MARK
TO REINFORCE SOLDERING
(NON-PIN CONNECTION)
Notes:
1. Dimensions are in millimeters (inches).
2. Tolerance, unless otherwise specified,
± 0.1 mm (± 0.004 inch).
REAR VIEW
HSMx-S660 Series
Absolute Maximum Ratings at TA = 25ºC
Parameter
HSMx-S660
HSMx-S670
HSMx-S690
Units
30
30
30
mA
Power Dissipation
81
81
81
mW
Reverse Voltage (IR = 100 µA)
5
5
5
V
Operating Temperature Range
-40 to +85
-40 to +85
-40 to +85
ºC
Storage Temperature Range
-40 to +100
-40 to +100
-40 to +100
ºC
DC Forward
Current [1][2][3][4]
Notes:
1. Derate linearly as shown in Figure 4.
2. Drive currents between 1 mA and 30 mA are recommended for best long term performance.
3. Operating at currents below 1 mA is not recommended. Please contact your Agilent representative for further information.
4. Maximum temperature for tape and reel packaging is 60°C.
POLARITY
MARK
3
Optical Characteristics at TA = 25ºC
Luminous
Intensity IV
(mcd) @ IF =
20 mA[1]
Min.
Typ.
Peak
Wavelength
λpeak (nm)
Typ.
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
Viewing
Luminous
Angle 2θ1/2 Efficacy
Degrees [3]
ηV
Typ.
(lm/W)
Part Number
Color
HSMA-S660
Amber
16.0
65.0
592
590
155
480
HSMA-S670
Amber
16.0
65.0
592
590
165
480
HSMA-S690
Amber
16.0
65.0
592
590
165
480
HSMD-S660
Orange
16.0
65.0
609
605
155
370
HSMD-S670
Orange
16.0
65.0
609
605
165
370
HSMD-S690
Orange
16.0
65.0
609
605
165
370
HSMC-S660
Red
16.0
50.0
630
626
155
197
HSMC-S670
Red
16.0
50.0
630
626
165
197
HSMC-S690
Red
16.0
50.0
630
626
165
197
Notes:
1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical
axis of the lamp package.
2. The dominate wavelength λd is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at TA = 25ºC
Forward
Voltage V F
(Volts) @ I F
= 20 mA
Typ.
Max.
Reverse
Breakdown
VR (Volts) @
IR = 100 µA
Min.
Capacitance C
(pF), VF = 0,
f = 1 MHz Typ.
Thermal
Resistance
RθJ-PIN
(ºC/W)
Part Number
Color
HSMA-S660
HSMA-S670
HSMA-S690
Amber
Amber
Amber
1.9
1.9
1.9
2.4
2.4
2.4
5
5
5
45
45
45
600
300
300
HSMD-S660
HSMD-S670
HSMD-S690
Orange
Orange
Orange
1.9
1.9
1.9
2.4
2.4
2.4
5
5
5
45
45
45
600
300
300
HSMC-S660
HSMC-S670
HSMC-S690
Red
Red
Red
1.9
1.9
1.9
2.4
2.4
2.4
5
5
5
45
45
45
600
300
300
4
Yellow/Amber Color Bins[1]
Bin ID
A
B
C
D
E
F
Dom. Wavelength (nm)
Min.
Max.
582.0
584.5
584.5
587.0
587.0
589.5
589.5
592.0
592.0
594.5
594.5
597.0
Tolerance: ± 0.5 nm.
Orange Color Bins[1]
Bin ID
A
B
C
D
E
F
Dom. Wavelength (nm)
Min.
Max.
597.0
600.0
600.0
603.0
603.0
606.0
606.0
609.0
609.0
612.0
612.0
615.0
Tolerance: ± 1 nm.
Note:
1. Bin categories are established for classification of products. Products may not be
available in all bin categories. Please contact your Agilent representative for
information on currently available bins.
5
Light Intensity (Iv) Bin Limits[1]
Intensity (mcd)
Bin ID
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Min.
0.11
0.18
0.29
0.45
0.72
1.10
1.80
2.80
4.50
7.20
11.20
18.00
28.50
45.00
71.50
112.50
180.00
285.00
450.00
715.00
1125.00
1800.00
2850.00
Max.
0.18
0.29
0.45
0.72
1.10
1.80
2.80
4.50
7.20
11.20
18.00
28.50
45.00
71.50
112.50
180.00
285.00
450.00
715.00
1125.00
1800.00
2850.00
4500.00
Tolerance ± 15%
Note:
1. Bin categories are established for classification of products. Products may not be
available in all bin categories. Please contact your Agilent representative for
information on currently available bins.
6
1.0
ORANGE
AMBER
RELATIVE INTENSITY
RED
0.5
0
550
594 600 607
630
650
700
WAVELENGTH – nm
IF – FORWARD CURRENT – mA
Figure 1. Relative Intensity vs. Wavelength.
100
50
20
10
5
2
1
0.5
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
VF – FORWARD VOLTAGE – V
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
2.5
2.0
1.5
1.0
0.5
0
0
10
20
30
40
50
IF – DC FORWARD CURRENT – mA
Figure 3. Relative Luminous Intensity
vs. Forward Current.
IF MAX. – MAXIMUM FORWARD CURRENT – mA
Figure 2. Forward Current vs.
Forward Voltage.
35
30
25
20
RθJ-A = 600 °C/W
15
RθJ-A = 500 °C/W
10
5
0
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE – °C
Figure 4. Maximum Forward Current
vs. Ambient Temperature.
7
20°
10°
0°
1.0
0.8
50°
0.6
60°
0.4
70°
0.2
80°
90°
NORMALIZED INTENSITY
30°
40°
10 20 30 40 50 60 70 80 90 100
ANGULAR DISPLACEMENT – DEGREES
Figure 5. Relative Luminous Intensity vs. Angular Displacement for HSMx-S660.
1.0
NORMALIZED INTENSITY
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-100-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
ANGULAR DISPLACEMENT – DEGREES
Figure 6. Relative Luminous Intensity vs. Angular Displacement for HSMx-S670.
1.0
NORMALIZED INTENSITY
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-100-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
ANGULAR DISPLACEMENT – DEGREES
Figure 7. Relative Luminous Intensity vs. Angular Displacement for HSMx-S690.
8
0.9
2.4
0.2
0.8
0.8
HSMX-S690 SERIES
0.9
5.0 2.0
RWS CENTER
3.4
1.5
1.1
MOUNTING EXAMPLE
1.3
EMITTED DIRECTION
HSMX-S670 SERIES
HSMX-S660 SERIES
Figure 8. Recommended Solder Patterns.
10 SEC. MAX.
TEMPERATURE
230°C MAX.
4°C/SEC. MAX.
140-160°C
4°C/SEC. MAX.
OVER 2 MIN.
TIME
Figure 9. Recommended IR Reflow Soldering Profile
9
180
Ø (7.08)
21.0
(0.83)
2.0
(0.08)
USER FEED DIRECTION
60.0
Ø (2.36)
Ø 13.0
(0.51)
LABEL
CATHODE SIDE
60°
60°
1.5 TYP.
(0.06)
PRINTED LABEL
NOTE:
ALL DIMENSIONS IN MILLIMETERS (INCHES).
Figure 10. Reeling Orientation.
Figure 11. Reel Dimensions.
4.00 ± 0.10
(0.157 ± 0.004)
1.50 + 0.10
0
Ø
(0.059 + 0.004)
0
CATHODE
1.30 ± 0.10
(0.051 ± 0.004)
0.20 ± 0.05
(0.008 ± 0.002)
1.75 ± 0.10
(0.069 ± 0.004)
3.50 ± 0.05
(0.138 ± 0.002)
DIM. A
(SEE TABLE 1)
DIM. B
(SEE TABLE 1)
2.00 ± 0.05
(0.079 ± 0.002)
8.00 ± 0.30
(0.315 ± 0.012)
USER FEED
DIRECTION
4.00 ± 0.10
(0.157 ± 0.004)
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
PART NUMBER
DIM. A
DIM. B
± 0.10 (0.004) ± 0.10 (0.004)
HSMX-S670 SERIES 2.25 (0.089) 1.45 (0.057)
HSMX-S690 SERIES 1.85 (0.073) 1.00 (0.039)
Figure 12. Tape Dimensions HSMx-S670, HSMx-S690.
CATHODE HOLE
FOR HSMX-S690
SERIES
CARRIER TAPE
COVER TAPE
13.0
(0.51)
10.0
(0.39)
10
1.50 + 0.10
0
Ø
(0.059 + 0.004)
0
4.00 ± 0.10
(0.157 ± 0.004)
1.20
CATHODE
2.0
1.75 ± 0.10
(0.069 ± 0.004)
3.50 ± 0.05
(0.138 ± 0.002)
3.35
(0.15)
8.00 ± 0.30
(0.315 ± 0.012)
2.3
(0.08)
(Ø1.1)
CATHODE
HOLE
USER FEED
DIRECTION
4.00 ± 0.10
(0.157 ± 0.004)
2.00 ± 0.05
(0.079 ± 0.002)
Figure 13. Tape Dimensions HSMx-S660.
END
THERE SHALL BE A
MINIMUM OF 40 mm
(1.57 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
START
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 40 mm
(1.57 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
150 mm-360 mm
(5.9 - 14.2 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Figure 14. Tape Leader and Trailer Dimensions.
Storage Condition: 5 to 30˚ C @ 60% RH max.
Baking is required under the condition:
a) the blue silica gel indicator becoming white/transparent color
b) the pack has been opened for more than 1 week
Baking recommended condition: 60 +/– 5˚C for 20 hours.
CATHODE
HOLE
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(408) 654-8675
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6271 2451
India, Australia, New Zealand: (+65) 6271 2394
Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only)
Korea: (+65) 6271 2194
Malaysia, Singapore: (+65) 6271 2054
Taiwan: (+65) 6271 2654
Data subject to change.
Copyright © 2002 Agilent Technologies, Inc.
Obsoletes 5988-7314EN
September 23, 2002
5988-7964EN