COMPACT "SLIM" AND
"FLAT" 16A RELAYS WITH
HIGH HEAT RESISTANCE
22.8
.898
JL-RELAYS
FEATURES
12.3
.484
27.8
1.094
28.5
1.112
23
.906
13
.512
• "Slim" and "Flat" types
Use the slim type when PCB real estate is
limited, and the flat type when headroom
is limited.
• High switching capacity
AC switching capacity is a high 16 A 277
V, and the #187 tab terminals allow quick
connection.
• Operates at high temperatures
The relays can be used at ambient temperatures of up to 85°C 185°F.
This satisfies UL Insulation Class B
(consulf with our sales representative)
mm inch
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1A)
Contact material
Nominal switching capacity
Rating
Max. switching power
(resistive
Max. switching voltage
load)
Max. switching current
Mechanical (at 180 cpm)
Expected
life (min.
Electrical (at 20 cpm)
operations) (Resistive load)
Characteristics
Slim type
Slim type
Flat type
1 Form A
Max. operating speed (at
rated load)
Initial insulation resistance
100 mΩ
Silver alloy
16 A 277 V AC
4,432 VA
277 VAC
16 A
2×106
Min. 100 MΩ (at 500 V DC)
1,000 Vrms for 1 min.
5,000 Vrms for 1 min.
Min. 10,000 V
Approx. 7 ms
Release time (without diode)*3
(at nominal voltage)(at 20°C)
Coil
Nominal operating power
20 cpm
Between open
Initial
contacts
breakdown
Between convoltage*1
tacts and coil
Surge voltage between contact and coil*2
Operate time*3
(at nominal voltage)(at 20°C)
105
500 mW
Temperature rise
(at nominal voltage)
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Detection current: 10mA
*2 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*5 Half-wave pulse of sine wave: 6ms
*6 Detection time: 10µs
*7 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 24).
Functional*4
Destructive*5
Shock
resistance
Functional*6
Vibration
resistance
Destructive
Ambient
Conditions for operation,
transport and storage*7
temp.
(Not freezing and condensHumidity
ing at low temperature)
Unit weight
Flat type
Approx. 2 ms
Max. 55°C
(resistance method, contact current
16 A, rated coil voltage, 20°C)
Min. 98 m/s2 {10 G}
Min. 980 m/s2 {100 G}
10 to 55 Hz
at double amplitude of 1.0 mm
10 to 55 Hz
at double amplitude of 2.0 mm
–40°C to +85°C –40°F to +185°F
5 to 85% R.H.
Approx. 17 g .60 oz Approx. 18 g .63 oz
TYPICAL APPLICATIONS ORDERING INFORMATION
Microwave ovens, rice cookers, irons, fan
heaters and hot water units.
Ex. JL
Contact arrangement
1a: 1 Form A
1a
G
F
Relay type Protective construction
G: Slim type
Z: Flat type
F: Flux tight type
Note: Standard packing:
Note: <Slim type> Carton: 100pcs. Case: 500pcs.
Note: <Flat type> Carton: 50pcs. Case: 500pcs.
102
TMP1
9V
Terminals
Coil voltage (DC)
TMP1: TMP type,
#187 tab teminals
5, 6, 9, 12, 18,
24 V
JL
TYPES AND COIL DATA (at 20°C 68°F)
Part No.
JL1aGF-TMP1-5V
JL1aZF-TMP1-5V
5
3.5
0.25
Normal
operating
current, mA
(±10%)
100
JL1aGF-TMP1-6V
JL1aGF-TMP1-9V
JL1aGF-TMP1-12V
JL1aGF-TMP1-18V
JL1aGF-TMP1-24V
JL1aZF-TMP1-6V
JL1aZF-TMP1-9V
JL1aZF-TMP1-12V
JL1aZF-TMP1-18V
JL1aZF-TMP1-24V
6
9
12
18
24
4.2
6.3
8.4
12.6
16.8
0.3
0.45
0.6
0.9
1.2
83.3
55.6
41.7
27.8
20.8
Slim type
Flat type
Nominal
voltage,
V DC
Pick-up voltage,
V DC (max.)
Drop-out
voltage,
V DC (min.)
Coil resistance,
Ω (±10%)
Normal
operating
power, mW
Max. allowable
voltage,
(at 60°C 140°F)
500
130% of
nominal voltage
(100% of nominal
voltage
at 85°C 185°F)
50
72
162
288
648
1,152
REFERENCE DATA
1. Operate/release time
2. Coil temperature rise
Sample: JL1aZF-TMP1-12V, 20 pcs.
Ambient temperature: 25°C 77°F
Sample: JL1aGF-TMP1-12V, 5 pcs.
Point measured: inside the coil
Ambient temperature: 26°C 79°F
3. Ambient temperature characteristics
(Contact carrying current: 16 A)
Sample: JL1aGF-TMP1-12V, 6 pcs.
200
Operate time
6
Max.
x
Min.
4
Release time
Temperature rise, °C
Operation/release time, ms
60
8
Max.
x
Min.
2
Contact carrying current
16A
13A
8A
0A
50
40
30
Coil applied voltage, %V
10
Contact carrying current:
16 A 0 A
Allowable ambient
temperature against %
coil voltage (max.
set as 115°C
239°F)
180
160
140
120
20
100
10
80
Pick-up voltage with
hot-start condition of
100%V on the coil.
Pick-up voltage
80
90
0
100 110 120 130
Coil applied voltage, %V
0
80
90
4. Life curve
5-(1). Electrical life test
Operation frequency: 20 times/min.
(ON/OFF = 1.5s:1.5s)
Ambient temperature: Room temperature
Sample: JL1aGF-TMP1-12V, 6 pcs.
Load: AC 277 V, 16 A, resistive load
Opetation frequency: 20 cpm
(ON:OFF = 1.5 s:1.5 s)
Ambient temperature : 26°C 79°F
100
Life, ×104
277 V AC
12 V DC
20
10
11
12
13
14
15
60
80
Ambient temperature, °C
Welding and
mis-contact
detection
10
8
Pick-up voltage
4
0
16
Max.
x
Min.
6
2
1
40
12
125V AC resistive load
10
0
Change of pick-up and Drop-out voltage
circuit:
250V AC resistive load
0
100 110 120 130
Coil applied voltage, %V
Pick-up/drop-out voltage, V
0
Drop-out voltage
5
Max.
x
Min.
10
NO. of operations, ×104
Contact current, A
5-(2). Electrical life test
Change of pick-up and Drop-out voltage
Sample: JL1aZF-TMP1-12V, 5 pcs.
Load: AC 125 V, 12 A
Opetation frequency: 20 cpm
(ON:OFF = 1.5s:1.5 s)
Ambient temperature : 80°C 176°F
Circuit: (with coil diode protection)
125 V AC
12 V DC
Welding and
mis-contact
detection
Pick-up/drop-out voltage, V
12
10
8
Pick-up voltage
Max.
x
Min.
6
4
2
0
Drop-out voltage
5
Max.
x
Min.
10
NO. of operations, ×104
103
JL
5-(3). Electrical life test
Change of pick-up and Drop-out voltage
Sample: JL1aGF-TMP1-12V, 5 pcs.
Load: AC 125 V, 13 A
Opetation frequency: 20 cpm
(ON:OFF = 1.5 s:1.5 s)
Ambient temperature : 90°C 194°F
Pick-up/drop-out voltage, V
12
Circuit: (with coil diode protection)
Welding and
mis-contact
detection
125 V AC
12 V DC
10
8
Pick-up voltage
Max.
x
Min.
6
4
Drop-out voltage
Max.
x
Min.
2
0
5
10
NO. of operations, ×10
DIMENSIONS
4
mm inch
2.2
.087
1. Slim type
6
.236
4.75
.187
Schematic (Bottom view)
8.4
.331
27.3
1.075
N.O. COM
PC board pattern (Bottom view)
17.2
.677
4.5
.177
22.8
.898
1.8
.071
0.5
.020
1.5
.060
0.5
.020
3-2 dia.
3-.079 dia.
7.5
.295
0.6
.024
7.5
.295
12.3
.484
Tolerance ±0.1 ±.004
0.5
.020
1.5
.060
17.2
.677
General tolerance ±0.3 ±.012
2.75
.108
2. Flat type
Schematic (Bottom view)
28.5
1.122
N.O.
COM
10.6
.417
PC board pattern (Bottom view)
23
.906
10
.394
7
7 2-2 dia.
.276 .276 2-.079 dia.
12.15
.478
7.5 .295
37
1.457
33.5
1.319
C1
3.2
8.4 6.35 .126
.331 .250
7.5 .295
4.75
.187
1.4 dia. .055 dia.
12.6
.496
19.2
.756
12.5
.492
4.5 .177
0.5
.020
0.8
.031
0.5
.020
8.9
.350
0.8
.031
0.5
.020
5.1 .201
1.5
.060
8.5
.335
10
.394
11
.433
3-1.2 dia.
3-.047 dia.
This product should only be used when there is no patterned metal surface (other than the terminal pattern) on
the PC board facing the marked area
.
0.8
.031
General tolerance ±0.3 ±.012
Tolerance ±0.1 ±.004
NOTES
The rated contact capacity and life are
typical values. Since contact phenomena
and life vary depending on kinds of load
and other conditions, please examine
them through actual conditions.
Take particular care with the load in the
following cases:
• When switching an alternating load, if
the switching phase is synchrono with the
load, locking and welding may occur.
• When switching loads at high frequency,
arcing during switching may produce gases that can corrode metal parts.
For Cautions for Use, see Relay Technical Information (Page 11 to 39).
104