AXIAL LEAD AND CARTRIDGE FUSES SUBMINIATURE GLASS BODY 2AG Slo-Blo ® Type Fuse U® L ® MIL ® The 2AG Slo-Blo® fuses are available in cartridge form or with axial leads. Axial leaded fuses are board washable. 2AG fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. Sleeved fuses are available. ELECTRICAL CHARACTERISTICS: Opening Time 4 hours, Minimum 1 hour, Maximum 3 seconds, Minimum; 20 seconds, Maximum AGENCY APPROVALS: Listed by Underwriters Laboratories and Certified by CSA through 3.5 amperes. Recognized under the Components Program of Underwriters Laboratories from 4 through 7 amperes. 229 004 and 229 005 approved by MITI. 230 001 through 230 005 approved by MITI. AGENCY FILE NUMBERS: UL E10480, CSA LR 29862. FUSES TO MIL SPEC: 229 and 230 Series are available to DESC Drawing #87108.To order, change 229 to 290 or 230 to 291. INTERRUPTING RATINGS: 0.25–3.5A 10,000 amperes at 125VAC 4–7A 400 amperes at 125VAC 0.25–1A 35 amperes at 250VAC 1.25–3.5A 100 amperes at 250VAC OPTIONS: 230 Series available on tape and reel. PACKAGING SPECIFICATIONS: Tape and Reel per EIA296; T1: 52.4mm (2.062") taped spacing; For 1,500 per reel, 10mm (.40") spacing, add packaging suffix, DRT1. For 2,500 per reel, 5mm (.20") spacing, add packaging suffix, ERT1. PATENTED ORDERING INFORMATION: Axial Lead Catalog Ampere Voltage Number Rating Rating 230.250 1/4 250 230.350 .350 250 230.375 3/8 250 230.500 1/2 250 230.600 6/10 250 230.750 3/4 250 230.800 8/10 250 230 001 1 250 1 230 1.25 1 /4 250 1 250 230 01.5 1 /2 230 002 2 250 1 230 2.25 2 /4 250 250 230 02.5 21/2 230 003 3 250 230 03.5 31/2 250 230 004 4 125 230 005 5 125 230 006 6 125 230 007 7 125 Nominal Resistance Cold Ohms 2.41 1.30 1.16 0.688 0.477 0.340 0.304 0.210 0.145 0.107 0.0692 0.0562 0.0498 0.0380 0.0310 0.0256 0.0185 0.0140 0.0115 Nominal Melting I 2t A2 Sec. 0.216 0.490 0.580 1.16 1.75 2.95 3.45 5.64 9.80 15.0 30.0 39.0 50.0 77.0 110.0 148.0 267.0 380.0 464.0 230 000 Series .025" .19" .177" .60" .57" 1.50" TYP. Axial Lead Material: Solder coated copper. Average Time Current Curves 1000 100 TIME IN SECONDS Cartridge Catalog Number 229.250 229.350 229.375 229.500 229.600 229.750 229.800 229 001 229 1.25 229 01.5 229 002 229 2.25 229 02.5 229 003 229 03.5 229 004 229 005 229 006 229 007 229 000 Series 1/4A 3/8A 1/2A 3/4A 1A 1 1/2A 2A 2 1/2A 3A 3 1/2A 4A 5A 7A % of Ampere Rating 110% 135% 200% 10 1 2AG Special Surge Withstand Slo-Blo® Type U® L ® 0.1 AXIAL LEAD PART NUMBER: 220 003 (0.35A) ELECTRICAL CHARACTERISTICS: Amperes 0.35A 0.6A 2.0A 6.0A Opening Time 4 hours, Minimum 90 seconds, Maximum 2 seconds, Maximum 0.5 second, Maximum 0.01 0.1 1 10 100 CURRENT IN AMPERES 1000 INTERRUPTING RATINGS: Same as 230 Series. LIGHTNING SURGE WITHSTAND CAPABILITY: 25 amperes peak, 800V, 10 x 560 microseconds. PATENTED Refer to page 50 for other Surge Withstand Fuses. 49 AXIAL LEAD AND CARTRIDGE FUSES SUBMINIATURE GLASS BODY 2AG Surge Withstand Type U® L 2AG Surge Withstand Fuse combines conventional overcurrent protection with the ability to withstand high current, short duration pulses. These fuses comply with the short circuit requirements of UL 1459 for telephone equipment. Insulating Sleeve Option available. ELECTRICAL CHARACTERISTICS: Short Circuit Capabilities: UL 1459 / UL 1950 3rd Edt.: 40A, 7A, 2.2A, • Meets UL 497 Specifications % of Ampere Rating 110% 135% 200% 600VAC 600VAC 600VAC Opening Time 4 hours, Minimum 1 hour, Maximum 3 seconds, Minimum 20 seconds, Maximum 229 000 Series .025" .177" AGENCY APPROVALS: Listed by Underwriters Laboratories and Certified by CSA. AGENCY FILE NUMBERS: UL E10480, CSA LR 29862. PHYSICAL SPECIFICATIONS: Materials: Glass Body, Nickel-Plated Brass Fuse Caps. (Insulating sleeve option available). Soldering parameters: Wave solder — 500°F (260°C), 3 seconds Max. Reflow solder — Not recommended. Solderability: (Axial Leaded Fuses): MIL-STD-202, Method 208. PACKAGING SPECIFICATIONS: Tape and Reel per EIA-296; T1: 52.4mm (2.062") taped spacing; For 1,500 per reel, 10mm (.40") spacing, add packaging suffix, DRT1. For 2,500 per reel, 5mm (.20") spacing, add packaging suffix, ERT1. Insulating sleeve option available. PATENTED TIME-CURRENT CURVES: See Page 43, Slo-Blo®, 2AG. Axial Lead Catalog Ampere Voltage Number Rating Rating 230.250 1/4 250 230.350 35/100 250 230.375 3/8 250 230.500 1/2 250 230.600 6/10 250 230.750 3/4 250 230.800 8/10 250 230 001 1 250 230 1.25 11/4 250 Nominal Resistance Cold Ohms 2.410 1.300 1.160 0.688 0.477 0.340 0.304 0.210 0.145 Nominal Melting I 2 t A2 Sec. 0.216 0.490 0.580 1.16 1.75 2.95 3.45 5.64 9.80 50 1.50" TYP. ENVIRONMENTAL SPECIFICATIONS: Operating Temperature: –55°C to 125°C. Shock: MIL-STD-202, Method 213, Test Condition I (100 G’s peak for 6 milliseconds). Vibration: MIL-STD-202, Method 201 (10 –55 Hz, 0.06 inches total excursion). Salt Spray: MIL-STD-202 Method 101, Test Condition B (48 hours). Insulation Resistance (After Opening): MIL-STD-202, Method 302, Test Condition B. Resistance to Soldering Heat: (Axial Leaded Fuses): MIL-STD-202, Method 210A, Test Condition B (260°C, 3 Seconds). Thermal Shock: MIL-STD-202, Method 107, Test Condition B (–65°C to 125°C). Moisture Resistance: MIL-STD-202, Method 106 (90-98% RH, 65°C). PEAK WITHSTAND CURRENT (lp): These fuses will withstand 50 repetitions of a double exponential impulse wave having peak currents (lp) and peak voltages as listed. Amperage Rating 1/4 35/100 3/8 1/2 6/10 10 x 160 microsec. 1500V 23.0A 34.0A 40.0A 60.0A 71.0A 10 x 560 microsec. 800V 16.6A 25.8A 25.4A 37.7A 47.2A 10 x 1000 microsec. 1000V 12.4A 19.3A 19.0A 28.2A 35.3A 3/4 8/10 1 11/41 91.0A 104.0A 130.0A 162.0A 65.5A 68.9A 88.6A 118.1A 49.0A 51.6A 66.3A 100.0A 1 500A NOTE: LF logo, series number, amperage rating, voltage rating, and UL and CSA logos are stamped on the fuse caps. .60" Axial Lead Material: Solder coated copper. ORDERING INFORMATION: Cartridge Catalog Number 229.250 229.350 229.375 229.500 229.600 229.750 229.800 229 001 229 1.25 .19" .57" INTERRUPTING RATINGS: 10,000 amperes at 125VAC 1/4–11/4A 1/4–1A 35 amperes at 250VAC 11/4 A 100 amperes at 250VAC 230 000 Series peak, 2500V, 2 x 10 microseconds, 20 repetitions. ®