4N22U 4N23U 4N24U Mii JAN, JANTX, JANTXV, OPTOCOUPLERS OPTOELECTRONIC PRODUCTS DIVISION Features: Applications: • • • • • • • • • Base lead provided for conventional transistor biasing Overall current gain...1.5 typical (4N24U) High gain, high voltage transistor Miniature package saves circuit board area High voltage electrical isolation…1KV rating Line Receivers Switchmode Power Supplies Signal ground isolation Process Control input/output isolation DESCRIPTION Very high gain optocoupler utilizing GaAIAs infrared LED optically coupled to an N-P-N silicon phototransistor in a 6-pin leadless chip carrier. The 4N22U, 4N23U and 4N24U optocouplers can be supplied to customer specifications as well as JAN, JANS, JANTX, and JANTXV quality levels. *ABSOLUTE MAXIMUM RATINGS Input to Output Voltage ........................................................................................................................................................ ±1kV Collector-Base Voltage ...........................................................................................................................................................35V Collector-Emitter Voltage (See Note 1) ..................................................................................................................................35V Emitter-Base Voltage ................................................................................................................................................................4V Input Diode Reverse Voltage ....................................................................................................................................................2V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 2).....................................40mA Continuous Collector Current...............................................................................................................................................50mA Peak Diode Current (See Note 3).............................................................................................................................................1A Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 4)................................ 300mW Operating Free-Air Temperature Range............................................................................................................ -55°C to +125°C Storage Temperature ......................................................................................................................................... -65°C to +125°C Lead Temperature (1/16” (1.6mm) from case for 10 seconds) ..........................................................................................240°C Notes: 1. This value applies with the emitter-base diode open-circuited and the input-diode current equal to zero. 2. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C. 3. This value applies for tw≤1us. PRR<300 pps. 4. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C. * JEDEC registered data Package Dimensions .066 (1.68) .080 (2.03) .240 (6.10) .250 (6.35) PIN 1 .082 (2.08) .098 (2.49) 1 A .165 (4.19) .175 (4.44) IDENTIFIER .028 (0.71) .022 (0.56) Schematic Diagram 2 3 1 4 6 5 C 3 E 5 B 4 .095 (2.41) .105 (2.67) .045 (1.14) .055 (1.39) .060 (1.52) 5 PL .070 (1.78) 6 K MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 4N22U, 4N23U, and 4N24U JAN, JANTX, JANTXV, OPTOCOUPLERS ELECTRICAL CHARACTERISTICS INPUT LED TA = 25°C Unless otherwise specified PARAMETER SYMBOL Input Diode Static Reverse Current MIN IR -55°C +25°C +125°C Input Diode Static Forward Voltage MAX UNITS TEST CONDITIONS 100 µA VR = 2V VF 1.0 0.8 0.7 1.5 1.3 1.2 V IF = 10mA MAX UNITS TEST CONDITIONS V IC = 100µA, IB = 0, IF = 0 NOTE OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified SYMBOL MIN Collector-Base Breakdown Voltage PARAMETER V(BR)CBO 35 Collector-Emitter Breakdown Voltage V(BR)CEO 35 V IC = 1mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 4 V IC= 0, IE = 100µA, IF = 0 NOTE COUPLED CHARACTERISTICS TA = 25°C Unless otherwise specified PARAMETER SYMBOL MIN UNITS TEST CONDITIONS 4N22U 4N23U 4N24U mA VCE = 5V, IB = 0, IF = 2mA IC(ON) 0.15 0.2 0.4 4N22U 4N23U 4N24U 2.5 6.0 10.0 mA IC(ON) On State Collector Current -55°C 4N22U 4N23U 4N24U 1.0 2.5 4.0 mA IC(ON) On State Collector Current +100°C 4N22U 4N23U 4N24U 1.0 2.5 4.0 mA IC(ON) On State Collector Current On State Collector Current MAX NOTE VCE = 5V, IB = 0, IF = 10mA VCE = 5V, IB = 0, IF = 10mA VCE = 5V, IB = 0, IF = 10mA +25°C IC(OFF) 100 nA VCE = 20V, IB = 0, IF = 0mA Off State Collector Current +100°C IC(OFF) 100 µA VCE = 20V, IB = 0, IF = 0mA VCE(SAT) VCE(SAT) VCE(SAT) 0.3 0.3 0.3 V V V IC = 2.5mA, IB = 0, IF = 20mA IC = 5mA, IB = 0, IF = 20mA IC = 10mA, IB = 0, IF = 20mA VIN-OUT = 1kV 1 f = 1MHz, VIN-OUT = 1kV 1 Off State Collector Current Collector-Emitter Saturation Voltage 4N22U 4N23U 4N24U 11 Input to Output Resistance ALL RI-O Input to Output Capacitance ALL CI-O 5 pF 4N22U 4N23U 4N24U tr tr tr 15 15 20 µs 4N22U 4N23U 4N24U tf tf tf 15 15 20 µs Rise Time Fall Time 10 µs VCC = 10V, IF = 10mA, RL = 100Ω µs µs VCC = 10V, IF = 10mA, RL = 100Ω µs NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. This parameter must be measured using pulse techniques tW = 100 µs. duty cycle ≤ 1%. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 1 µA Input Current, High Level IFH 2 10 mA VCE 5 10 V Supply Voltage UNITS SELECTION GUIDE PART NUMBER JAN4N22U JAN4N23U JAN4N24U JANTX4N22U JANTX4N23U JANTX4N24U JANTXV4N22U JANTXV4N23 JANTXV4N24U PART DESCRIPTION 4N22U Optocoupler, JAN Screening level 4N23U Optocoupler, JAN Screening level 4N24U Optocoupler, JAN Screening level 4N22U Optocoupler, JANTX Screening level 4N23U Optocoupler, JANTX Screening level 4N24U Optocoupler, JANTX Screening level 4N22U Optocoupler, JANTXV Screening level 4N23U Optocoupler, JANTXV Screening level 4N24U Optocoupler, JANTXV Screening level MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM