Type GSA / GSAP Slow Blow Fuse Series GSAD0199 Catalog Number Electrical Characteristics (UL/CSA STD. 248-14) Blow Time Testing current Minimum Maximum 100% 4 Hrs. N/A 135% N/A 1 Hr 200% 5 sec 30 sec Approvals VßrStc Safety Agency Approvals Type Amp range / Volt @ I.R. ability 63mA .- 8A / 125V AC@ 10,000A V Listed File no. E20624 ß Certified File no. LR39772 GSA / GSAP 63mA. - 1A / 250V AC@ 35A >1A. - 3.5A / 250V AC@ 100A >3.5A - 8A / 250V AC@ 200A r Recognized File no. E20624 S Acceptance File no. LR39772 t 1/4 x 1 1/4 inch Ceramic Tube Approval File no. 32-1764 / no. 32-1766 File no. 32-1765 GSA / GSAP GSA / GSAP GSA 10A. - 15A / 125V AC@ 10,000A 10A. - 15A / 250V AC@ 750A 1A. - 5A / 125V AC@ 500A >5A. - 15A /125V AC@ 300A Ampere Rating GSA (P) 63 GSA (P) 100 GSA (P) 125 GSA (P) 160 GSA (P) 200 GSA (P) 250 GSA (P) 300 GSA (P) 375 GSA (P) 500 GSA (P) 750 GSA (P) 1 GSA (P)1.25 GSA (P) 1.6 GSA (P) 2 GSA (P) 2.5 GSA (P) 3 GSA (P) 4 GSA (P) 5 GSA (P) 6 GSA (P) 7 GSA (P) 8 GSA (P) 10 GSA (P) 12 GSA (P) 15 Typical Volt-drop Melting I2T Cold @100% In < 10 mSec Resistance (ohm) (Volt) max. (A2 Sec) 63mA 100mA 125mA 160mA 200mA 250mA 300mA 375mA 500mA 750mA 1A 1.25A 1.6A 2A 2.5A 3A 4A 5A 6A 7A 8A 10A 12A 15 A 80 22 16 11 8.3 4.9 3.3 2.4 1.5 0.7 0.5 0.3 0.21 0.14 0.09 0.06 0.04 0.03 0.019 0.016 0.014 0.010 0.008 0.006 7 4 2.8 2.3 1.9 1.6 1.4 1.2 0.95 0.69 0.56 0.47 0.39 0.33 0.27 0.23 0.19 0.16 0.16 0.16 0.15 0.14 0.13 0.12 0.09 0.21 0.32 0.50 0.77 1.20 1.85 2.6 4.4 9.7 16.4 25.4 39.3 61 94 146 226 349 286 372 483 817 1277 2123 Melting I2T @10 In (A2 Sec) Maximum Power Dissipation (W) 0.10 0.24 0.37 0.58 0.91 1.42 2.22 3.2 5.4 12.1 20.6 32.3 50.4 79 123 192 300 469 455 592 769 1300 2031 3377 0.71 0.55 0.58 0.60 0.63 0.66 0.70 0.73 0.78 0.85 0.91 0.96 1.01 1.06 1.1 1.2 1.2 1.3 1.6 1.8 1.9 2.3 2.6 3.0 Consult manufacturer for other ratings Operating Temperature -55ºC to +125ºC Physical Specification Materials Ceramic body / Nickel Plated Brass Caps Lead wire: Tin-lead plated Copper, Diameter 0.040" all ratings Marking On fuse: “bel”, “GSA”, “Current Rating”, “Voltage Rating”, and "Appropriate Safety Logos" On label: Above info plus “c” and interrupting rating Voltage on fuse: 250V for 63mA to 15A Packaging 1. In bulk: GSA - 1,000 pcs per box; GSAP - 500 pcs per box 2. On Axial Tape & Reel: 1,000 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 73mm inside Tape Spacing Mechanical Dimensions GSA GSAP 1.25" ± 0.03" 0.250" ± 0.004" (31.8 ± 0.8mm) (6.35 ± 0.1mm) 1.5" ± 0.08" 1.28" ± 0.03" 0.270" ± 0.004" (38.1 ± 2mm) (32.5 ± 0.8mm) (6.9 ± 0.1mm) SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Internet: http://www. belfuse.com Type GSA / GSAP 1/4 x 1 1/4 inch Ceramic Tube Slow Blow Fuse Series GSAC0600 - 63mA - 100mA - 125mA - 160mA - 200mA - 250mA - 300mA - 375mA - 500mA - 750mA - 1A - 1.25A - 1.6A - 2A - 2.5A - 3A - 4A - 5A - 6A - 7A - 8A - 10A - 12A - 15A GSA / GSAP - TIME CURRENT CHARACTERISTIC CURVE 10000 1000 TIME IN SECONDS 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 FaxFax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Te l : 8 5 2 - 2 3 2 8 - 5 5 1 5 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. P r e s t o n Te c h n o l o g y M a n a g e m e n t C e n t r e Marsh Lane, Preston PR1 8U Lancashire, U.K Te l : 4 4 - 1 7 7 2 - 5 5 6 6 0 1 Fax: 44-1772-888366