Ordering number:ENN2609B Monolithic Linear IC L78M00T Series 5 to 24V 0.5A 3-Pin Voltage Regulators Features Package Dimensions • Output voltage L78M05T : 5V L78M06T : 6V L78M07T : 7V L78M08T : 8V L78M09T : 9V L78M10T : 10V L78M12T : 12V L78M15T : 15V L78M18T : 18V L78M20T : 20V L78M24T : 24V • 500mA output. • On-chip thermal protector. • On-chip overcurrent limiter. • On-chip ASO protector. • Small-sized power package TP-3H permitting the equipment to be made compact. • The allowable power dissipation can be increased by being surface-mounted on the board. • Capable of being mounted in a variety of methods because of various lead forming versions available. unit:mm 3110 [L78M00T Series] 2.3 0.5 5.5 7.0 1.5 6.5 5.0 1.2 0.6 7.5 0.5 2.6 1 0.5 2.6 2 3 1 : INPUT 2 : COMMON 3 : OUTPUT SANYO : TP-3H Equivalent Circuit Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1599TH (KT)/D0694HK/9237KI/9107TA, TS No.2609–1/8 L78M00T Series Specifications [Common to L78M00T series] Maximum Ratings at Ta = 25˚C Parameter Maximum Supply Voltage Allowable Power Dissipation Symbol Conditions Ratings Unit VCC max Pin 1 35 V Pd max No fin 1.0 W Operating Temperature Topr –20 to +80 ˚C Storage Temperature Tstg –40 to +150 ˚C [L78M05T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 7.5 to 20 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=10V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Symbol VOUT ∆Vo LINE Line Regulation ∆Vo LOAD Load Regulation Output Voltage VOUT Current Dissipation ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection VNO Rrej Minimum Input-Output Voltage Drop VDROP Conditions Tj=25°C Ratings min 4.8 typ max Unit 5.0 5.2 V Tj=25°C, 7V≤VIN≤25V, IOUT=200mA 3.0 50 mV Tj=25°C, 8V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 1.0 Tj=25°C, 5mA≤IOUT≤200mA 7V≤VIN≤20V, 5mA≤IOUT≤350mA 4.75 Tj=25°C 4.5 8V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 25 mV 100 mV 50 mV 5.25 V 6.0 mA 0.8 mA 0.5 mA 40 f=120Hz, 8V≤VIN≤19V, Tj=25°C, IOUT=100mA 62 f=120Hz, 8V≤VIN≤19V, Tj=25°C, IOUT=300mA 62 µV dB 80 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A [L78M06T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 8.5 to 21 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=11V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE VOUT ICC ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Ripple Rejection Minimum Input-Output Voltage Drop Tj=25°C Ratings min 5.75 typ VNO Rrej VDROP max Unit 6.0 6.25 Tj=25°C, 8V≤VIN≤25V, IOUT=200mA 5.0 60 mV Tj=25°C, 9V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 1.5 ∆Vo LOAD Tj=25°C, 5mA≤IOUT≤200mA Current Dissipation Variation (Line) Output Noise Voltage Conditions 8V≤VIN≤21V, 5mA≤IOUT≤350mA 5.7 Tj=25°C 4.5 9V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 45 f=120Hz, 9V≤VIN≤20V, Tj=25°C, IOUT=100mA 59 f=120Hz, 9V≤VIN≤20V, Tj=25°C, IOUT=300mA 59 V 30 mV 120 mV 60 mV 6.3 V 6.0 mA 0.8 mA 0.5 mA µV dB 80 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A No.2609–2/8 L78M00T Series [L78M07T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 9.5 to 22 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=12V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Symbol VOUT ∆Vo LINE Line Regulation ∆Vo LOAD Load Regulation Output Voltage VOUT Current Dissipation ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection VNO Rrej Minimum Input-Output Voltage Drop VDROP Conditions Tj=25°C Ratings min 6.72 typ max Unit 7.0 7.28 Tj=25°C, 9V≤VIN≤25V, IOUT=200mA 6.0 60 mV Tj=25°C, 10V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 2.0 Tj=25°C, 5mA≤IOUT≤200mA 9V≤VIN≤22V, 5mA≤IOUT≤350mA 6.6 Tj=25°C 4.6 10V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 30 mV 140 mV 70 mV 7.4 V 6.0 mA 0.8 mA 0.5 mA 48 f=120Hz, 10V≤VIN≤21V, Tj=25°C, IOUT=100mA 58 f=120Hz, 10V≤VIN≤21V, Tj=25°C, IOUT=300mA 58 V µV dB 80 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A Ratings Unit [L78M08T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Symbol Conditions VIN Output Current 10.5 to 23 IOUT 5 to 500 V mA Operating Characteristics at Ta = 25˚C, VIN=15V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE ∆Vo LOAD VOUT ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop VNO Rrej VDROP Conditions Tj=25°C Ratings min 7.7 typ max Unit 8.0 8.3 V Tj=25°C, 10.5V≤VIN≤25V, IOUT=200mA 6.0 60 mV Tj=25°C, 11V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 2.0 Tj=25°C, 5mA≤IOUT≤200mA 10.5V≤VIN≤23V, 5mA≤IOUT≤350mA 7.6 Tj=25°C 4.6 11V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 50 f=120Hz, 11.5V≤VIN≤22V, Tj=25°C, IOUT=100mA 56 f=120Hz, 11.5V≤VIN≤22V, Tj=25°C, IOUT=300mA 56 30 mV 160 mV 80 mV 8.4 V 6.0 mA 0.8 mA 0.5 mA µV dB 80 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A No.2609–3/8 L78M00T Series [L78M09T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 12 to 25 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=16V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Symbol VOUT ∆Vo LINE Line Regulation ∆Vo LOAD Load Regulation Output Voltage VOUT Current Dissipation ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection VNO Rrej Minimum Input-Output Voltage Drop VDROP Conditions Tj=25°C Ratings min 8.6 typ max Unit 9.0 9.4 V Tj=25°C, 11.5V≤VIN≤25V, IOUT=200mA 6.0 100 mV Tj=25°C, 12V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 2.0 Tj=25°C, 5mA≤IOUT≤200mA 11.5V≤VIN≤24V, 5mA≤IOUT≤350mA 8.5 4.6 Tj=25°C 12.5V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 50 mV 180 mV 90 mV 9.5 V 6.0 mA 0.8 mA 0.5 mA 60 f=120Hz, 12V≤VIN≤23V, Tj=25°C, IOUT=100mA 56 f=120Hz, 12V≤VIN≤23V, Tj=25°C, IOUT=300mA 56 µV dB 80 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A [L78M10T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 13 to 25 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=17V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE ∆Vo LOAD VOUT ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop VNO Rrej VDROP Conditions Ratings min max Unit 10.0 10.4 V Tj=25°C, 12.5V≤VIN≤25V, IOUT=200mA 7.0 100 mV Tj=25°C, 13V≤VIN≤22V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 2.0 Tj=25°C 9.6 typ Tj=25°C, 5mA≤IOUT≤200mA 12.5V≤VIN≤25V, 5mA≤IOUT≤350mA 9.5 4.6 Tj=25°C 13.5V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 65 f=120Hz, 13V≤VIN≤25V, Tj=25°C, IOUT=100mA 55 f=120Hz, 13V≤VIN≤25V, Tj=25°C, IOUT=300mA 55 50 mV 200 mV 100 mV 10.5 V 6.0 mA 0.8 mA 0.5 mA µV dB 80 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A No.2609–4/8 L78M00T Series [L78M12T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 15 to 25 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=19V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Symbol VOUT ∆Vo LINE Line Regulation ∆Vo LOAD Load Regulation Output Voltage VOUT Current Dissipation ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection VNO Rrej Minimum Input-Output Voltage Drop VDROP Conditions Tj=25°C Ratings min 11.5 typ max Unit 12.0 12.5 V Tj=25°C, 14.5V≤VIN≤30V, IOUT=200mA 8.0 100 mV Tj=25°C, 16V≤VIN≤25V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 2.0 Tj=25°C, 5mA≤IOUT≤200mA 14.5V≤VIN≤27V, 5mA≤IOUT≤350mA 11.4 4.8 Tj=25°C 15V≤VIN≤30V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 50 mV 240 mV 120 mV 12.6 V 6.0 mA 0.8 mA 0.5 mA 75 f=120Hz, 15V≤VIN≤25V, Tj=25°C, IOUT=100mA 55 f=120Hz, 15V≤VIN≤25V, Tj=25°C, IOUT=300mA 55 µV dB 80 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A [L78M15T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 18 to 30 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=23V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE ∆Vo LOAD VOUT ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop VNO Rrej VDROP Conditions Tj=25°C Ratings min 14.4 Tj=25°C, 17.5V≤VIN≤30V, IOUT=200mA Tj=25°C, 19V≤VIN≤30V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA typ 15.6 V 10.0 100 mV 3.0 14.25 Tj=25°C 17.5V≤VIN≤30V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 90 54 f=120Hz, 18.5V≤VIN≤28.5V, Tj=25°C, IOUT=300mA 54 50 mV 300 mV 150 mV 15.75 4.8 f=120Hz, 18.5V≤VIN≤28.5V, Tj=25°C, IOUT=100mA Unit 15.0 Tj=25°C, 5mA≤IOUT≤200mA 17.5V≤VIN≤30V, 5mA≤IOUT≤350mA max 6.0 V mA 0.8 mA 0.5 mA µV dB 70 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A No.2609–5/8 L78M00T Series [L78M18T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 21 to 33 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=27V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Symbol VOUT ∆Vo LINE Line Regulation ∆Vo LOAD Load Regulation Output Voltage VOUT Current Dissipation ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection VNO Rrej Minimum Input-Output Voltage Drop VDROP Conditions Tj=25°C Ratings min 17.3 typ max Unit 18.0 18.7 V Tj=25°C, 21V≤VIN≤35V, IOUT=200mA 10.0 100 mV Tj=25°C, 22V≤VIN≤35V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 5.0 Tj=25°C, 5mA≤IOUT≤200mA 21V≤VIN≤33V, 5mA≤IOUT=350mA 17.1 4.9 Tj=25°C 21V≤VIN≤33V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 50 mV 360 mV 180 mV 18.9 V 6.0 mA 0.8 mA 0.5 mA 100 f=120Hz, 22V≤VIN≤33V, Tj=25°C, IOUT=100mA 53 f=120Hz, 22V≤VIN≤33V, Tj=25°C, IOUT=300mA 53 µV dB 70 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A [L78M20T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 23 to 35 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=29V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE ∆Vo LOAD VOUT ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop VNO Rrej VDROP Conditions Tj=25°C Ratings min 19.2 typ max Unit 20.0 20.8 V Tj=25°C, 23V≤VIN≤35V, IOUT=200mA 10.0 100 mV Tj=25°C, 24V≤VIN≤35V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 5.0 Tj=25°C, 5mA≤IOUT≤200mA 23V≤VIN≤35V, 5mA≤IOUT=350mA 19.0 Tj=25°C 4.9 23V≤VIN≤35V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 110 f=120Hz, 24V≤VIN≤34V, Tj=25°C, IOUT=100mA 53 f=120Hz, 24V≤VIN≤34V, Tj=25°C, IOUT=300mA 53 50 mV 400 mV 200 mV 21.0 V 6.0 mA 0.8 mA 0.5 mA µV dB 70 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A No.2609–6/8 L78M00T Series [L78M24T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Output Current Symbol Conditions Ratings Unit VIN 27 to 35 V IOUT 5 to 500 mA Operating Characteristics at Ta = 25˚C, VIN=33V, IOUT=350mA, See specified Test Circuit. Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE ∆Vo LOAD VOUT ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop VNO Rrej VDROP Conditions Ratings min max Unit 24.0 25.0 V Tj=25°C, 27V≤VIN≤35V, IOUT=200mA 10.0 100 mV Tj=25°C, 28V≤VIN≤35V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA 5.0 Tj=25°C 23.0 typ Tj=25°C, 5mA≤IOUT≤200mA 27V≤VIN≤35V, 5mA≤IOUT=350mA 22.8 27V≤VIN≤35V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 170 f=120Hz, 28V≤VIN≤35V, Tj=25°C, IOUT=100mA 50 f=120Hz, 28V≤VIN≤35V, Tj=25°C, IOUT=300mA 50 mV mV 240 mV 25.2. 5.0 Tj=25°C 50 480 6.0 V mA 0.8 mA 0.5 mA µV dB 70 dB IOUT=350mA 2.0 V Short Current IOS Tj=25°C, VIN=35V, to GND 300 mA Peak Output Current IOP Tj=25°C 0.7 A Specified Test Circuit (Common to L78M00T series) The allowable power dissipation (Pd max) is 1.0W (Ta=25°C) with no fin attached. When the L78M00T series are surface-mounted on a hybrid IC board or printed circuit board, a high allowable power dissipation can be obtained, though they are placed in a small-sized package. Shown below is the relationship between the Cu-foiled area and the allowable power dissipation when the L78M00T series are surface-mounted on a glass epoxy board (50×50×0.8mm3). No.2609–7/8 L78M00T Series Lead Formings FA forming LR forming Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 1999. Specifications and information herein are subject to change without notice. PS No.2609–8/8