Ordering number:ENN2605B Monolithic Linear IC L79M00T Series –5 to –12V 0.5A 3-Pin Voltage Regulators Features Package Dimensions • Output voltage L79M05T : –5V L79M06T : –6V L79M08T : –8V L79M09T : –9V L79M10T : –10V L79M12T : –12V • 500mA output. • Small-sized power package TP-3H permitting the equipment to be made compact. • The allowable power dissipation can be increased by being surface-mounted on the board. • Capable of being mounted in a variety of methods because of various lead forming versions available. • On-chip protectors (overcurrent limiter, ASO protector, thermal protector). • Can meet tape-used automatic mounting requirements. unit:mm 3110 [L79M00T Series] 2.3 0.5 5.5 7.0 1.5 6.5 5.0 1.2 0.6 7.5 0.5 2.6 1 0.5 2.6 2 3 1 : COMMON 2 : INPUT 3 : OUTPUT SANYO : TP-3H Equivalent Circuit Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1599TH (KT)/D218YT/9237KI/7247TA, TS No.2605–1/5 L79M00T Series Specifications [Common to L79M00T series] Maximum Ratings at Ta = 25˚C Parameter Maximum Supply Voltage Allowable Power Dissipation Symbol VCC max Conditions Ratings –5 to –12V output Pd max Unit –35 V 1.0 W Operating Temperature Topr –30 to +80 ˚C Storage Temperature Tstg –40 to +150 ˚C [L79M05T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Symbol Conditions Ratings VIN Output Current Unit –20 to –7.5 IOUT 5 to 500 V mA Operating Characteristics at Ta = 25˚C, VIN=–10V, IOUT=350mA, CIN=2µF, COUT=1µF Parameter Output Voltage Symbol VOUT ∆Vo LINE Line Regulation ∆Vo LOAD Load Regulation Output Voltage VOUT Current Dissipation ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection VNO Rrej Minimum Input-Output Voltage Drop VDROP Short Current IOS Peak Output Current IOP Conditions Tj=25°C Ratings min –5.2 typ max Unit –5.0 –4.8 Tj=25°C, –25V≤VIN≤–7V 7.0 50 mV Tj=25°C, –18V≤VIN≤–8V Tj=25°C, 5mA≤IOUT≤500mA 3.0 30 mV 10 100 mV Tj=25°C, 5mA≤IOUT≤350mA 5 –25V≤VIN≤–7V, 5mA≤IOUT≤350mA mV –5.25 –4.75 1.0 Tj=25°C 2.5 –25V≤VIN≤–8V 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 50 f=120Hz, –18V≤VIN≤–8V, Tj=25°C, IOUT=300mA 50 V mA 1.0 mA 0.4 mA 125 f=120Hz, –18V≤VIN≤–8V, Tj=25°C, IOUT=100mA V µV dB 65 dB Tj=25°C, IOUT=350mA 1.1 V Tj=25°C, VIN=–30V 130 mA 800 mA Ratings Unit [L79M06T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Symbol Conditions VIN Output Current –21 to –8.5 IOUT 5 to 500 V mA Operating Characteristics at Ta = 25˚C, VIN=–11V, IOUT=350mA, CIN=2µF, COUT=1µF Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE ∆Vo LOAD VOUT ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop VNO Rrej VDROP Short Current IOS Peak Output Current IOP Conditions Tj=25°C Ratings min max Unit –6.0 –5.75 Tj=25°C, –25V≤VIN≤–8V 7.0 60 mV Tj=25°C, –19V≤VIN≤–9V Tj=25°C, 5mA≤IOUT≤500mA 3.0 40 mV 10 120 mV Tj=25°C, 5mA≤IOUT≤350mA 5 –25V≤VIN≤–8V, 5mA≤IOUT≤350mA –6.25 typ –6.3 Tj=25°C 1.0 –25V≤VIN≤–9V 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 150 f=120Hz, –19V≤VIN≤–9V, Tj=25°C, IOUT=100mA 50 f=120Hz, –19V≤VIN≤–9V, Tj=25°C, IOUT=300mA 50 V mV –5.7 V 2.5 mA 1.0 mA 0.4 mA µV dB 65 dB Tj=25°C, IOUT=350mA 1.1 V Tj=25°C, VIN=–30V 130 mA 800 mA No.2605–2/5 L79M00T Series [L79M08T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Symbol Conditions Ratings VIN Output Current Unit –23 to –11 IOUT 5 to 500 V mA Operating Characteristics at Ta = 25˚C, VIN=–14V, IOUT=350mA, CIN=2µF, COUT=1µF Parameter Output Voltage Symbol VOUT ∆Vo LINE Line Regulation ∆Vo LOAD Load Regulation Output Voltage VOUT Current Dissipation ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage VNO Ripple Rejection Rrej Minimum Input-Output Voltage Drop VDROP Short Current IOS Peak Output Current IOP Conditions Ratings min –8.3 typ max Unit –8.0 –7.7 Tj=25°C, –25V≤VIN≤–10.5V 8.0 80 mV Tj=25°C, –21V≤VIN≤–11V Tj=25°C, 5mA≤IOUT≤500mA 4.0 50 mV 11 160 mV Tj=25°C, 5mA≤IOUT≤350mA 6 Tj=25°C –25V≤VIN≤–10.5V, 5mA≤IOUT≤350mA mV –8.4 1.0 Tj=25°C –25V≤VIN≤–10.5V 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, –21.5V≤VIN≤–11.5V, Tj=25°C, IOUT=100mA f=120Hz, –21.5V≤VIN≤–11.5V, Tj=25°C, IOUT=300mA –7.6 V 2.5 mA 1.0 mA 0.4 mA 200 µV 50 50 V dB 64 dB Tj=25°C, IOUT=350mA 1.1 V Tj=25°C, VIN=–30V 130 mA 800 mA Ratings Unit [L79M09T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Symbol Conditions VIN Output Current –25 to –12 IOUT 5 to 500 V mA Operating Characteristics at Ta = 25˚C, VIN=–16V, IOUT=350mA, CIN=2µF, COUT=1µF Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE ∆Vo LOAD VOUT ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage VNO Ripple Rejection Rrej Minimum Input-Output Voltage Drop VDROP Short Current IOS Peak Output Current IOP Conditions Ratings min max Unit –9.0 –8.6 Tj=25°C, –25V≤VIN≤–11.5V 8.0 80 mV Tj=25°C, –20V≤VIN≤–12V Tj=25°C, 5mA≤IOUT≤500mA 4.0 50 mV 12 200 mV Tj=25°C, 5mA≤IOUT≤350mA 7 Tj=25°C –25V≤VIN≤–11.5V, 5mA≤IOUT≤350mA –9.4 typ –9.5 1.0 Tj=25°C –25V≤VIN≤–11.5V 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, –22.5V≤VIN≤–12.5V, Tj=25°C, IOUT=100mA f=120Hz,–22.5V≤VIN≤–12.5V, Tj=25°C, IOUT=300mA Tj=25°C, IOUT=350mA Tj=25°C, VIN=–30V 225 50 50 V mV –8.5 V 2.5 mA 1.0 mA 0.4 mA µV dB 63 dB 1.1 V 130 mA 800 mA No.2605–3/5 L79M00T Series [L79M10T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Symbol Conditions Ratings VIN Output Current Unit –25 to –13 IOUT 5 to 500 V mA Operating Characteristics at Ta = 25˚C, VIN=–17V, IOUT=350mA, CIN=2µF, COUT=1µF Parameter Output Voltage Symbol VOUT ∆Vo LINE Line Regulation ∆Vo LOAD Load Regulation Output Voltage VOUT Current Dissipation ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection VNO Rrej Minimum Input-Output Voltage Drop VDROP Short Current IOS Peak Output Current IOP Conditions Ratings min –10.4 typ max Unit –10 –9.6 Tj=25°C, –25V≤VIN≤–12.5V 9.0 80 mV Tj=25°C, –22V≤VIN≤–13V Tj=25°C, 5mA≤IOUT≤500mA 5.0 50 mV 12 200 mV Tj=25°C, 5mA≤IOUT≤350mA 7 Tj=25°C –25V≤VIN≤–12.5V, 5mA≤IOUT≤350mA mV –10.5 1.0 Tj=25°C –25V≤VIN≤–12.5V 5mA≤IOUT≤350mA 10Hz≤f≤100kHz –9.5 V 2.5 mA 1.0 mA 0.4 mA 250 f=120Hz, –23.5V≤VIN≤–13.5V, Tj=25°C, IOUT=100mA f=120Hz, –23.5V≤VIN≤–13.5V, Tj=25°C, IOUT=300mA µV 50 50 V dB 63 dB Tj=25°C, IOUT=350mA 1.1 V Tj=25°C, VIN=–30V 130 mA 800 mA Ratings Unit [L79M12T] Recommended Operating Conditions at Ta = 25˚C Parameter Input Voltage Symbol Conditions VIN Output Current –25 to –15 IOUT 5 to 500 V mA Operating Characteristics at Ta = 25˚C, VIN=–19V, IOUT=350mA, CIN=2µF, COUT=1µF Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Symbol VOUT ∆Vo LINE ∆Vo LOAD VOUT ICC Current Dissipation Variation (Line) ∆ICC LINE Current Dissipation Variation (Load) ∆ICC LOAD Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop VNO Rrej VDROP Short Current IOS Peak Output Current IOP Conditions Tj=25°C Ratings min max Unit –12 –11.5 Tj=25°C, –30V≤VIN≤–14.5V 9.0 80 mV Tj=25°C, –25V≤VIN≤–15V Tj=25°C, 5mA≤IOUT≤500mA 5.0 50 mV 9 240 mV Tj=25°C, 5mA≤IOUT≤350mA 6 –30V≤VIN≤–14.5V, 5mA≤IOUT≤350mA –12.5 typ –12.6 –30V≤VIN≤–14.5V 5mA≤IOUT≤350mA 10Hz≤f≤100kHz 300 f=120Hz, –25V≤VIN≤–15V, Tj=25°C, IOUT=100mA 50 f=120Hz, –25V≤VIN≤–15V, Tj=25°C, IOUT=300mA 50 mV –11.4 1.6 Tj=25°C V 3.5 V mA 1.0 mA 0.4 mA µV dB 72 dB Tj=25°C, IOUT=350mA 1.1 V Tj=25°C, VIN=–30V 130 mA 800 mA No.2605–4/5 L79M00T Series Specified Test Circuit (Common to L79M00T series) Note) VIN max must be in the range specified above, with regulation, etc. considered. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 1999. Specifications and information herein are subject to change without notice. PS No.2605–5/5