DG5143 Low-Power, High-Speed CMOS Analog Switch Features Benefits Applications 15-V Input Range On-Resistance: 50 Fast Switching Action—tON: 100 ns Low Power—PD: <350 W TTL and CMOS Compatible Improved Signal Headroom Low Signal Errors Break-Before-Make Switching Action Reduced Power Consumption Simple Interfacing Audio Switching Precision Switching High-Speed Switching Battery Powered Systems Description The DG5143 solid state analog switch is built on the Siliconix proprietary high-voltage silicon gate process to achieve high voltage rating and superior switch time on/off performance. Break-before-make switching action guarantees that an on-channel will be turned off before the off-channel can turn on. The DG5143 features ultra-low power supply requirements and TTL and CMOS compatibility. Each switch conducts equally well in both directions when on and blocks input voltages to the supply values when off. This switch is ideal for battery powered industrial applications with a maximum power supply current of 1 A. An expitaxial layer prevents latchup. Functional Block Diagram and Pin Configuration Dual-In-Line D1 S1 NC IN1 D3 V– S3 GND S4 VL D4 V+ NC IN2 Temp Range Package Part Number D2 S2 0 to 70C 16-Pin Plastic DIP DG5143CJ 0 OFF ON 1 ON OFF Logic “0” 0.8 V Logic “1” 2.4 V Ordering Information Updates to this data sheet may be obtained via facsimile by calling Siliconix FaxBack, 1-408-970-5600. Please request FaxBack document #70060. Siliconix S-52880—Rev. B, 28-Apr-97 1 DG5143 Absolute Maximum Ratings (V+) – (V–) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 36 V (V+) – (VD)a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 30 V (VD) – (V–)a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 30 V (VD) – (VS)a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < "22 V Continuous Current, Any Terminal . . . . . . . . . . . . . . . . . . . . . . . 30 mA Peak Current, S or D (pulsed a 1 ms, 10% duty cycle max) . . . 100 mA Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65 to 125 Power Dissipation (Package)b 16-Pin Plastic DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 mW (VL) – (V–) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 33 V (VL) – (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 30 V VL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 20 V VINa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 20 V Notes: a. Signals on SX, DX, or INX exceeding V+ or V– will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. Specifications Test Conditions Unless Otherwise Specified Parameter Symbol V+ = 15 V, V– = –15 V, VL = 5 V VIN = 2.4 V, 0.8 Ve C Suffix 0 to 70C Tempa Minc Full –15 Typb Maxc Unit 15 V 75 100 Analog Switch Analog Signal Ranged Drain-Source On-Resistance VANALOG rDS(on) VD ="10 V, IS = – 10 mA IS(off) VD = #10 V V, VS = "10 V Switch Off Leakage Current ID(off) Channel On Leakage Current ID(on) VS = VD = –10 to 10 V Room Full Room Full –5 –20 5 20 Room Full –5 –20 5 20 Room Full –2 –40 2 40 nA Digital Control Input Current with VIN Low IIL Full –1 1 Input Current with VIN High IIH Full –1 1 A Dynamic Characteristics Turn-On Time Turn-Off Time Break-Before-Make tON tOFF RL = 300 , CL = 35 pF F See Figure 1 tON – tOFF Room 175 Room 150 Room 5 150 Charge Injectiond Q CL = 10,000 pF, Vgen = 0 V, Rgen = 0 Room Isolationd OIRR RL = 100 , CL v 5 pF, f = 1 MHz Room XTALK Any Other Channel Switches RL = 100 , CL v 5 pF, f = 1 MHz Room –50 Room 10 Off Channel-to-Channel Crosstalkd ns pC –50 dB Power Supplies Positive Supply Current I+ Negative Supply Current I– Logic Supply Current IL Ground Current IGND VIN = 0 V or 5 V Switch S i h Duty D Cycle C l <10% 10% Room –10 Room Room 10 –10 Notes: a. Room = 25C, Full = as determined by the operating temperature suffix. b. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. d. Guaranteed by design, not subject to production test. e. VIN = input voltage to perform proper function. 2 Siliconix S-52880—Rev. B, 28-Apr-97 A DG5143 Test Circuits +5 V +15 V VL V+ VS1 S1 D1 VS2 S2 D2 VS = 10 V for tON VS = –10 V for tOFF VO2 IN GND VO1 RL1 300 V– RL2 300 CL1 35 pF CL2 35 pF –15 V CL (includes fixture and stray capacitance) 3V 0V Switch Input VS Switch Output Switch Input tr < 20 ns tf < 20 ns 50% Logic Input tOFF VO 90% 0V tON –VS VO 90% VO Figure 1. Switching Time Siliconix S-52880—Rev. B, 28-Apr-97 3