19-4187; Rev 2; 5/09
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
``````````````````````````````````` ᄂቶ
NBY:7610NBY:762ᆐᄰࡸਜ਼ၷᄰࡸWDPNहࡍLjࡒ൸
ڼ७ၒྜྷਜ਼ၒ߲ăNBY:7610NBY:762భሶඛവᄰࡸᄋ
ࡉ2411nBࡼख़ᒋ࢟ഗདࣅLj༦భᔫ᎖ࡉ31W࢟Ꮞă
♦ 2411nBख़ᒋၒ߲࢟ഗ
NBY:7610NBY:762ଐ᎖ႥᏎ߲ਜ਼ᇢ၃ࡍ࢟ഗLjጲܣ
ۣߒࡍUGU.MDEෂۇᒦࡼWDPN࢟ኹᆮࢾă
NBY:7610NBY:762ᎌ51W0μtڼൈਜ਼46NI{ࡒLjభᆐ
231I{ᑷႥൈਜ਼ཝIE࢟၁Ⴅᒙၒ߲ă
♦ ൸ڼ७ၒྜྷਜ਼ၒ߲
♦ ᔫ᎖ࡉ31W࢟Ꮞ
♦ 51W0μt࢟ኹڼൈ
♦ 46NI{ࡒ
♦ ඛᄰࡸ6nBஸზ࢟ഗ
NBY:7610NBY:762ᎌၒ߲വۣઐਜ਼ེਈࣥถăᑚೝ
ୈݧࡒൡࡼॖᓤLjᎌଛࡼྲེਫă
♦ ଛࡼྲེቶถ)ൡ*
``````````````````````````````````` ።
``````````````````````````````` ࢾ৪ቧᇦ
UGU.MDEෂۇ
AMPS PER
PACKAGE
PART
ጥ఼ܭᒜ࢟ኹᏎ
PINPACKAGE
TOP MARK
MAX9650AZK+
1
5 SOT23
ADSI
MAX9650AUA+
1
8 μMAX-EP*
AABI
MAX9650ATA+
1
8 TDFN-EP*
BKX
MAX9651AUA+
2
8 μMAX-EP*
AABH
MAX9651ATA+
2
8 TDFN-EP*
BKY
ᓖǖჅᎌୈᔫᏴ.51°Dᒗ,236°Dᆨࣞपᆍดă
+ܭာᇄ0९SpITܪᓰࡼॖᓤă
*FQ! >! ൡă
``````````````````````````` ࢜ቯᔫ࢟വ
16V
VDD
MAX9650
VREF
TFT LCD
IN_+
OUT_
IN_-
*RS
TFT-LCD
CAPACITANCE
GND
*RS MAY BE NEEDED FOR SOME APPLICATIONS.
________________________________________________________________ Maxim Integrated Products
1
۾ᆪဵNbyjnᑵါ፞ᆪᓾ೯ࡼፉᆪLjNbyjn࣪ݙडፉᒦࡀᏴࡼތፊᎅࠥޘညࡼࡇᇙঌᐊă༿ᓖፀፉᆪᒦభถࡀᏴᆪᔊᔝᒅ
डፉࡇᇙLjྙኊཀྵཱྀྀੜࠤᎫࡼᓰཀྵቶLj༿ݬఠ Nbyjnᄋࡼ፞ᆪۈᓾ೯ă
Ⴣནॅዹອਜ਼ᔢቤࡼۈၫᓾ೯Lj༿षᆰNbyjnࡼᓍǖxxx/nbyjn.jd/dpn/doă
NBY:7610NBY:762
``````````````````````````````````` গၤ
NBY:7610NBY:762
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VDD to GND) ................................-0.3V to +22V
Any Other Pin to GND ................................-0.3V to (VDD + 0.3V)
IN_+/IN_- (current)............................................................±20mA
OUT_ (current) ......................................................................1.3A
Continuous Power Dissipation (TA = +70°C)
5-Pin SOT23 (derate 3.7mW/°C above +70°C)........297.4mW
8-Pin μMAX-EP (derate 12.9mW/°C
above +70°C).......................................................1030.9mW
8-Pin TDFN-EP (derate 23.8mW/°C
above +70°C).......................................................1951.2mW
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = 19V, VGND = 0, VCM = VOUT = VDD/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
Supply Voltage Range
VDD
Guaranteed by PSRR
Quiescent Current
IDD
Per channel
High Output Voltage
VOH
IH = +5mA, VIN = VDD
Low Output Voltage
VOL
IL = -5mA, VIN = 0
Input Offset Voltage
VOS
MIN
6
3.7
VDD 0.30
TA = +25°C
-14
TA = -40°C to +125°C
-17
IFB
At VIN = 9.5V
Voltage Gain
AV
AV = 1V/V, RL = 10kΩ, CL = 50pF
VDD = 6V to 20V, VCM = VOUT = 3V
70
Common-Mode Input Voltage
Range
CMVR
Inferred from CMRR test
0.5
Common-Mode Rejection Ratio
CMRR
0.5V ≤ VCM ≤ VDD - 0.5V
60
IO
+17
0.01
PSRR
VOUT = 9.5V
(Note 2)
MAX9650AZK+
20
MAX9650AUA+
80
VDD = 15V, VOUT = 7.5V
MAX9650ATA+
V
+14
0.99
Power-Supply Rejection Ratio
mA
0.30
-0.2
Input Bias Current
V
8
3.5
+0.2
V
V
mV/mA
1
μA
1.01
V/V
95
dB
VDD 0.5
80
UNITS
20
0.05
IOUT = 0 to -80mA
LR
MAX
VDD 0.05
IOUT = 0 to +80mA
Load Regulation
Continuous Output Current
TYP
V
dB
mA
±350
Transient Peak Output Current
IPK
(Note 3)
±1.3
A
Bandwidth
BW
-3dB
35
MHz
Slew Rate
SR
4V step, CL = 50pF, RL = 10kΩ, AV = +1V/V
40
V/μs
Settling Time
tS
Settling to 0.1% of VOUT, IL = 0 to 1000mA,
RS = 2.2Ω, CS = 0.1μF (Figure 1)
2.0
μs
2
_______________________________________________________________________________________
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
(VDD = 19V, VGND = 0, VCM = VOUT = VDD/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Maximum Load Capacitance
CLOAD
(Note 4)
150
nF
Noninverting Input Resistance
RIN+
(Note 5)
100
MΩ
Inverting Input Resistance
RIN-
(Note 5)
100
MΩ
Input Capacitance
CIN
3
pF
Thermal Shutdown
Thermal Shutdown Hysteresis
+170
°C
15
°C
All devices are 100% production tested at TA = +25°C. All temperature limits are guaranteed by design.
Continuous output current is tested with one output at a time.
See the Thermal Shutdown with Temperature Hysteresis section.
A series resistor can extend load capacitance range. The settling time can be optimized by a small series resistance. See
the Applications Information section for more information.
Note 5: Inputs are protected by back-to-back diodes.
Note 1:
Note 2:
Note 3:
Note 4:
````````````````````````````````````````````````````````````````````````࢜ቯᔫᄂቶ
(VDD = 19V, GND = 0, VCM = VOUT = VDD/2, TA = +25°C, unless otherwise specified.)
INPUT OFFSET VOLTAGE DEVIATION
vs. SUPPLY VOLTAGE
2
1
0
TA = +25°C
-1
TA = -40°C
-2
6
5
4
3
2
-3
1
-4
0
6
9
12
15
SUPPLY VOLTAGE (V)
18
21
MAX9650 toc03
7
7
SUPPLY CURRENT (mA)
TA = +125°C
8
MAX9650 toc02
INPUT OFFSET VOLTAGE (mV)
3
8
INPUT OFFSET VOLTAGE (mV)
MAX9650 toc01
4
SUPPLY CURRENT
vs. SUPPLY VOLTAGE
INPUT OFFSET VOLTAGE DEVIATION
vs. TEMPERATURE
6
TA = +125°C
5
4
TA = +25°C
3
TA = -40°C
2
1
0
-50
-25
0
25
50
75
TEMPERATURE (°C)
100
125
6
9
12
15
18
21
SUPPLY VOLTAGE (V)
_______________________________________________________________________________________
3
NBY:7610NBY:762
ELECTRICAL CHARACTERISTICS (continued)
```````````````````````````````````````````````````````````````````````࢜ቯᔫᄂቶ)ኚ*
(VDD = 19V, GND = 0, VCM = VOUT = VDD/2, TA = +25°C, unless otherwise specified.)
7
SUPPLY CURRENT (mA)
MAX9650 toc05
MAX9650 toc04
8
LOAD TRANSIENT
SINKING
IOUT
(500mA/div)
6
MAX9650 toc06
LOAD TRANSIENT
SOURCING
SUPPLY CURRENT
vs. TEMPERATURE
IOUT
(500mA/div)
5
4
0.1A RESPONSE
1A RESPONSE
3
VOUT
(125mA/div)
2
VOUT
(125mV/div)
0.5A RESPONSE
1
0.5A RESPONSE
1A RESPONSE
0.1A RESPONSE
0
-50
-25
0
25
50
75
100
TIME (1μs/div)
TIME (1μs/div)
MAX9650 STEP RESPONSE
WITH VARIOUS CL
OPEN-LOOP GAIN AND PHASE
vs. FREQUENCY
125
TEMPERATURE (°C)
IDD
10mA/div
CL = 0.01μF
VOUT
5V/div
VOUT
5V/div
3
2
1
CL = 560pF
0
CL = 10pF
GAIN (dB)
5
CL = 100pF
-10
CL = 56pF
-15
0.01
0.1
1
FREQUENCY (MHz)
10
100
120
20
-1
-2
-3
0
-20
-60
-40
-120
-60
-180
15
-240
100E+0
1E+3
100E+3
1E+6
10E+3
FREQUENCY (Hz)
VOUT = 100mVP-P
RL = 10kΩ TO VDD/2
10
10,000pF
100pF
-5
-15
-6
-20
10E+6
FREQUENCY (Hz)
100E+6
1000pF
-10
1E+6
10E+6
0
-5
-7
100E+3
60
PHASE
0
5
-4
-5
180
40
20
0
CL = 0.001μF
CL = 0.1μF
VOUT = 100mVP-P
RL = 10kΩ TO VDD/2
GAIN (dB)
CL = 0.01μF
10
240
SMALL-SIGNAL GAIN vs. FREQUENCY
WITH VARIOUS CL
MAX9650 toc11
CL = 0.0022μF
300
60
SMALL-SIGNAL GAIN
vs. FREQUENCY
MAX9650 toc10
20
360
CL = 100pF
80
-80
10E+0
2μs/div
CLOSED-LOOP SMALL-SIGNAL FREQUENCY
RESPONSE FOR VARIOUS CL
MAX9650 toc09
GAIN
100
VOUT
5V/div
CL = 0.022μF
100ms/div
4
VOUT
5V/div
CL = 2200pF
VIN
5V/div
15
VOUT
5V/div
CL = 10pF
VDD
10V/div
120
100E+6
-25
100E+3
10pF
1E+6
10E+6
FREQUENCY (Hz)
_______________________________________________________________________________________
100E+6
PHASE (DEG)
MAX9650 toc08
MAX9650 toc12
MAX9650 toc07
GAIN (dB)
STARTUP WAVEFORM
VOLTAGE GAIN (dB)
NBY:7610NBY:762
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
୭
߂
MAX9650
ถ
MAX9651
SOT23
1
6
1
OUTA
WDPNၒ߲࣡Bă
2
4
4
GND
ă
3
3
3
INA+
ᄴሤၒྜྷ࣡Bă
4
2
2
INA-
नሤၒྜྷ࣡Bă
5
7
8
VDD
࢟Ꮞၒྜྷᑵ࣡ăݧጙৈ1/2μGჿࠣ࢟ྏWEE വᒗHOELj݀భถణத
ୈहᒙă
—
—
5
INB+
ᄴሤၒྜྷ࣡Că
—
—
6
INB-
नሤၒྜྷ࣡Că
—
—
7
OUTB
—
1, 5, 8
—
N.C.
—
—
—
EP
WDPNၒ߲࣡Că
ᇄೌăᇄดೌݝă
ൡăFQดೌݝᒗHOELjೌFQᒗHOEă
``````````````````````````````` ሮᇼႁී
NBY:7610NBY:762ᆐࡒ൸ڼ७ၒྜྷਜ਼ၒ߲ࡼᏥႯहࡍLj
భۣߒWDPN࢟ኹᆮࢾLjᄴဟభሶྏቶঌᏲ)ྙUGU.MDEෂ
ࡼۇ۳*ۇᄋႥᏎ߲ਜ਼ᇢ၃ࡍ࢟ഗ)2/4B*ă
19V
SUPPLY
*C2 = 0.1μF
VDD
ࡒᆨࣞᒣૄࡼེਈࣥ
NBY:7610NBY:762భᄋࡍၒ߲࢟ഗ݀ᎌེਈۣࣥઐ
ถLjࡒᆨࣞᒣૄăࡩஉᆨࡉࡵ,281°DဟLjୈਈࣥăࡩ
உᆨದསሆଢ଼26°DઁLjୈᏳࠨఎăᏴUGU.MDE።ᒦLj
ᐴహࢅ܈ă૾ဵܣᏴ࢟ኹਜ਼ࡍ࢟ഗ༽ౚሆLjጐ
ࢅ༦ୈ્ݙਈࣥă
*C1 = 10μF
19V
SUPPLY
MAX9650
VREF
LCD VCOM LOAD
IN_+
OUT_ VOUT_
IN_-
RS =
2.2Ω
CLCD =
0.1μF
**0V TO 2.2V
AT 50kHz
GND
``````````````````````````````` ።ቧᇦ
ၒ߲ঌᏲ
NBY:7610NBY:762ଐ᎖དࣅྏቶঌᏲăቃࡼࠈೊᔜ
ఝᄋ೫ୈቶถLjభᏴདࣅࡍቃྏቶঌᏲဟཀྵ
ۣᆮࢾቶਜ਼Ⴅೂဟମăࣶၫ༽ౚሆLjᎅ᎖ሣ಄ᎌ
ೌᔜఝLjჅጲকᔜఝጯளࡀᏴLjᇄኊೌऄᅪࡼ࢟ᔜ
Ꮔୈă
࢟Ꮞਜ਼വ࢟ྏ
NBY:7610NBY:762ᔫ᎖7Wᒗ31W࢟Ꮞ±5/6Wᒗ±21W
ၷ࢟Ꮞăးࡩࡼ࢟ᏎവభᏴདࣅࡍၾܤঌᏲဟཀྵۣᆮ
*10μF and 0.1μF CAPACITORS AS CLOSE AS POSSIBLE TO THE PIN.
**(RS = RGEN) x CLCD x 6 < 2μs, WHERE RGEN = GENERATOR SOURCE IMPEDANCE.
ᅄ2/! ೂဟମހ၂࢟വ
ࢾቶăNBY:7610NBY:762ኊገጙৈᔢቃᒋᆐ21μG! )D2*
ਜ਼ጙৈ1/2μG )D3*࢟Ꮞവ࢟ྏLj݀భถణத࢟Ꮞ୭
)WEE*हᒙăݬᅄ3ăၷ࢟Ꮞ࢟ဟLjᏴೝവ࢟Ꮞၒྜྷ࣡
)WEE ਜ਼HOE*ဧ21μGਜ਼1/2μGവ࢟ྏLjඛৈ࢟ྏ
భถణதWEE ਜ਼HOEहᒙă
_______________________________________________________________________________________
5
NBY:7610NBY:762
``````````````````````````````````````````````````````````````````````````` ୭ႁී
NBY:7610NBY:762
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
ݚਜ਼
16V
SUPPLY
μNBY® ਜ਼UEGOॖᓤࡼൡᄋࢅེᔜLj᎖ྲེă
ൡೌᒗށLjభဣሚᔢଛྲེᄂቶăݙገᏴॖ
ᓤሆෂݚሣăၷ࢟ᏎᔫဟLjൡ)FQ*భ࢟ೌᒗঌ
࢟Ꮞᑗኞహă
*C2 = 0.1μF
*C1 = 10μF
19V
SUPPLY
VDD
``````````````````````````````` በຢቧᇦ
MAX9650
PROCESS: BiCMOS
VREF
TFT LCD
IN_+
OUT_
IN_-
**RS
TFT-LCD
CAPACITANCE
GND
*10μF and 0.1μF CAPACITORS AS CLOSE AS POSSIBLE TO THE PIN.
**RS MAY BE NEEDED FOR SOME APPLICATIONS.
μNBYဵNbyjn! Joufhsbufe! Qspevdut-! Jod/ࡼᓖݿܪă
ᅄ3/! ࢜ቯࡼUGU.MDE۳ۇདࣅ࢟വ
`````````````````````````````````````````````````````````````````````````` ୭ᒙ
N.C. 1
MAX9650
OUTA 1
+
5
VDD
GND 2
INA+ 3
4
THIN SOT23
6
INA-
+ MAX9650
8
N.C.
INA- 2
7
VDD
INA+
3
6
GND 4
5
μMAX-EP
(TDFN-EP)
OUTA
1
+
8
VDD
INA- 2
7
OUTB
OUTA
INA+
3
6
INB-
N.C.
GND 4
5
INB+
MAX9651
μMAX-EP
(TDFN-EP)
_______________________________________________________________________________________
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
ॖᓤܠ൩
ᆪܠ
5 SOT23
Z5-2
21-0113
8 μMAX
U8E-2
21-0107
8 TDFN-EP
T833-2
21-0137
THIN SOT23.EPS
ॖᓤಢቯ
_______________________________________________________________________________________
7
NBY:7610NBY:762
````````````````````````````````````````````````````````````````````````````` ॖᓤቧᇦ
ྙኊᔢதࡼॖᓤᅪተቧᇦਜ਼ݚLj༿އኯ www.maxim-ic.com.cn/packagesă
NBY:7610NBY:762
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
````````````````````````````````````````````````````````````````````````````````````````````````` ॖᓤቧᇦ)ኚ*
ྙኊᔢதࡼॖᓤᅪተቧᇦਜ਼ݚLj༿އኯ www.maxim-ic.com.cn/packagesă
8
_______________________________________________________________________________________
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
8L, μMAX, EXP PAD.EPS
21-0107
C
1
1
_______________________________________________________________________________________
9
NBY:7610NBY:762
````````````````````````````````````````````````````````````````````````````````````````````````` ॖᓤቧᇦ)ኚ*
ྙኊᔢதࡼॖᓤᅪተቧᇦਜ਼ݚLj༿އኯ www.maxim-ic.com.cn/packagesă
````````````````````````````````````````````````````````````````````````````````````````````````` ॖᓤቧᇦ)ኚ*
ྙኊᔢதࡼॖᓤᅪተቧᇦਜ਼ݚLj༿އኯ www.maxim-ic.com.cn/packagesă
6, 8, &10L, DFN THIN.EPS
NBY:7610NBY:762
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
10
______________________________________________________________________________________
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
COMMONDIMENSIONS
PACKAGEVARIATIONS
SYMBOL
MIN.
MAX.
PKG.CODE
N
D2
E2
e
JEDECSPEC
b
A
0.70
0.80
T633-2
6
1.50±0.10
2.30±0.10
0.95BSC
MO229/WEEA
0.40±0.05
1.90REF
D
2.90
3.10
T833-2
8
1.50±0.10
2.30±0.10
0.65BSC
MO229/WEEC
0.30±0.05
1.95REF
E
2.90
3.10
T833-3
8
1.50±0.10
2.30±0.10
0.65BSC
MO229/WEEC
0.30±0.05
1.95REF
A1
0.00
0.05
T1033-1
10
1.50±0.10
2.30±0.10
0.50BSC
MO229/WEED-3
0.25±0.05
2.00REF
L
0.20
0.40
T1033-2
10
1.50±0.10
2.30±0.10
0.50BSC
MO229/WEED-3
0.25±0.05
2.00REF
[(N/2)-1]xe
k
0.25MIN.
T1433-1
14
1.70±0.10
2.30±0.10
0.40BSC
----
0.20±0.05
2.40REF
A2
0.20REF.
T1433-2
14
1.70±0.10
2.30±0.10
0.40BSC
----
0.20±0.05
2.40REF
______________________________________________________________________________________
11
NBY:7610NBY:762
````````````````````````````````````````````````````````````````````````````````````````````````` ॖᓤቧᇦ)ኚ*
ྙኊᔢதࡼॖᓤᅪተቧᇦਜ਼ݚLj༿އኯ www.maxim-ic.com.cn/packagesă
NBY:7610NBY:762
ࡍ࢟ഗWDPNདࣅᏥႯहࡍLj
᎖UGU! MDE
```````````````````````````````````````````````````````````````````````````` ኀࢿ಼ဥ
ኀࢿࠨၫ
ኀࢿ྇໐
ႁී
0
7/08
၅ࠨखݚă
1
10/08
ৎቤڼൈ݀ᐐଝ೫UEGO.FQॖᓤă
2
5/09
ৎቤ೫ೌኚၒ߲࢟ഗᒎܪă
ኀখ
—
1, 2, 6, 10, 11
2
Nbyjn ۱யࠀူێ
۱ய 9439ቧረ ᎆᑶܠ൩ 211194
ॅ࢟જǖ911!921!1421
࢟જǖ121.7322 62::
ࠅᑞǖ121.7322 63::
Nbyjn࣪ݙNbyjnޘອጲᅪࡼྀੜ࢟വဧঌᐊLjጐݙᄋᓜಽభăNbyjnۣഔᏴྀੜဟମĂᎌྀੜᄰۨࡼ༄ᄋሆኀখޘອᓾ೯ਜ਼ਖৃࡼཚಽă
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2009 Maxim Integrated Products
Nbyjn ဵ Nbyjn!Joufhsbufe!Qspevdut-!Jod/ ࡼᓖݿܪă
MAX9650, MAX9651 大电流VCOM驱动运算放大器，用于TFT LCD - 概述
ENGLISH • 简体中文 • 日本語 • 한국어 Login | Register
请输入关键词或器件型号
最新内容
产品
方案
设计
应用
技术支持
销售联络
公司简介
我的Maxim
Maxim > 产品 > LED照明和LCD显示器支持IC > MAX9650, MAX9651
Maxim > 产品 > 放大器和比较器 > MAX9650, MAX9651
Maxim > 产品 > 汽车电子产品 > MAX9650, MAX9651
MAX9650, MAX9651
大电流VCOM驱动运算放大器，用于TFT LCD
大电流、快速建立时间能够为TFT LCD快速恢复VCOM电压
概述 技术文档 定购信息 用户说明 (0) 所有内容 状况
状况：生产中。
概述
MAX9650/MAX9651为单通道和双通道VCOM放大器，带满摆幅输入和输出。MAX9650/MAX9651可向每路通道提
供高达1300mA的峰值电流驱动，且可工作于高达20V电源。
完整的数据资料
提供更新的英文版数据资料
MAX9650/MAX9651设计用于快速源出和吸收大电流，以便保持大TFT-LCD面板中的VCOM电压稳定。
MAX9650/MAX9651具有40V/µs摆率和35MHz带宽，可为120Hz帧速率和全HD电视快速设置输出。
英文
下载 Rev. 3 (PDF, 612kB)
中文
下载 Rev. 2 (PDF, 744kB)
MAX9650/MAX9651具有输出短路保护和热关断功能。这两款器件采用带裸焊盘的封装，具有极佳的散热效果。
关键特性
应用/使用
1300mA峰值输出电流
满摆幅输入和输出
工作于高达20V电源
40V/µs电压摆率
35MHz带宽
每路通道5mA静态电流
极佳的散热效果(裸焊盘)
显示器：LCD
平板和等离子TV
仪表控制电压源
TFT-LCD显示器
Key Specifications: Operational Amplifiers
ICC
VSUPPLY VSUPPLY
per
A VCL (Total)
(Total)
Amp.
Part
(V)
(V)
Amps. Rail to Rail
(µA)
Number
min
min
max
typ
I CC
per
Amp.
(µA)
VOS
(µV)
max
max
CMRR PSRR Input
@DC @DC IBIAS
(dB)
(dB) (nA)
typ
typ
max
Unity Slew
Gain Rate
BW
(V/
(MHz) µs)
typ
typ
Price
Low
Pwr.
Package/Pins
Shutdn
See
Notes
< tr>
MAX9651 2
90
Input/Output
MAX9650 1
6
20
3700
1
8000 14000
80
µMAX-EP/8
TDFN-EP/8
1000
35
40
No
< tr> < tr>
µMAX-EP/8
TDFN-EP/8
TSOT/5
95
$0.71
@1k
$0.54
@1k
查看所有Operational Amplifiers (149)
Key Specifications: VCOM Amplifiers and Panel Repair
Smallest
Available
Slew
Peak
Pckg. Price
V
Industry Oper. Temp.
Part
BW Rate
Package/Pins
Channels Current Rail to Rail
Features Programmable SUPPLY
Qualified
(°C)
(mm 2 )
Number
(MHz) (V/
(V)
(mA)
µs)
max
See
w/pins Notes
< tr>
MAX9651 2
http://china.maxim-ic.com/datasheet/index.mvp/id/5961[2010-8-14 8:30:42]
-
µMAX-EP/8
9.6
$0.71
@1k
MAX9650, MAX9651 大电流VCOM驱动运算放大器，用于TFT LCD - 概述
TDFN-EP/8
1300
MAX9650 Input/Output
30
40
Thermal
Shutdown
No
6 to 20 Automotive -40 to +125
AECQ100
Automotive
- General
1
查看所有VCOM Amplifiers and Panel Repair (7)
图表
典型工作电路
相关产品
类似产品：浏览其它类似产品线
查看所有Operational Amplifiers (155产品)
查看所有VCOM Amplifiers and Panel Repair (7产品)
更多信息
顶标
MAX9650
顶标
MAX9650C
顶标
MAX9651
没有找到你需要的产品吗？
应用工程师帮助选型，下个工作日回复
参数搜索
应用帮助
概述
技术文档
定购信息
概述
关键特性
应用/ 使用
关键指标
图表
注释、注解
相关产品
数据资料
应用笔记
评估板
设计指南
可靠性报告
软件/ 模型
价格与供货
样品
在线订购
封装信息
无铅信息
参考文献： 19- 4187 Rev. 3; 2010- 03- 24
本页最后一次更新: 2010- 03- 24
联络我们：信息反馈、提出问题 • 对该网页的评价 • 发送本网页 • 隐私权政策 • 法律声明
© 2010 Maxim Integrated Products版权所有
http://china.maxim-ic.com/datasheet/index.mvp/id/5961[2010-8-14 8:30:42]
< tr> < tr>
µMAX-EP/8
TDFN-EP/8
TSOT/5
8.3
$0.54
@1k
19-4187; Rev 4; 7/10
High-Current VCOM Drive Op Amps
for TFT LCDs
The MAX9650/MAX9651 are single- and dual-channel
VCOM amplifiers with rail-to-rail inputs and outputs. The
MAX9650/MAX9651 can drive up to 1300mA of peak
current per channel and operate up to 20V.
The MAX9650/MAX9651 are designed to source and
sink a high current quickly to hold the VCOM voltage
stable in large TFT-LCD panels.
The MAX9650/MAX9651 feature 40V/µs slew rate and
35MHz bandwidth to quickly settle outputs for 120Hz
frame rate and full HD television.
The MAX9650/MAX9651 feature output short-circuit
protection and thermal shutdown. These devices are
available in exposed pad packages for excellent heat
dissipation.
Features
♦ 1300mA Peak Output Current
♦ Rail-to-Rail Inputs and Outputs
♦ Operates Up to 20V
♦ 40V/µs Slew Rate
♦ 35MHz Bandwidth
♦ 5mA Quiescent Current per Channel
♦ Excellent Heat Dissipation (Exposed Pad)
Ordering Information
AMPS PER PINPACKAGE PACKAGE
PART
Applications
TFT-LCD Panels
Instrument Control Voltage Sources
TOP MARK
MAX9650AZK+
1
5 SOT23
ADSI
MAX9650AZK/V+
1
5 SOT23
ADSK
MAX9650AUA+
1
8 µMAX-EP*
AABI
MAX9650ATA+
1
8 TDFN-EP*
BKX
MAX9651AUA+
2
8 µMAX-EP*
AABH
MAX9651ATA+
2
8 TDFN-EP*
BKY
Note: All devices are specified over the -40°C to +125°C operating range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified part.
*EP = Exposed pad.
Typical Operating Circuit
16V
VDD
MAX9650
VREF
TFT LCD
IN_+
OUT_
IN_-
*RS
TFT-LCD
CAPACITANCE
GND
*RS MAY BE NEEDED FOR SOME APPLICATIONS.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1
MAX9650/MAX9651
General Description
MAX9650/MAX9651
High-Current VCOM Drive Op Amps
for TFT LCDs
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VDD to GND) ................................-0.3V to +22V
Any Other Pin to GND ................................-0.3V to (VDD + 0.3V)
IN_+/IN_- (current)............................................................±20mA
OUT_ (current) ......................................................................1.3A
Continuous Power Dissipation (TA = +70°C)
5-Pin SOT23 (derate 3.7mW/°C above +70°C)........297.4mW
8-Pin µMAX-EP (derate 12.9mW/°C
above +70°C).......................................................1030.9mW
8-Pin TDFN-EP (derate 23.8mW/°C
above +70°C).......................................................1951.2mW
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = 19V, VGND = 0V, VCM = VOUT = VDD/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
Supply Voltage Range
VDD
Guaranteed by PSRR
Quiescent Current
IDD
Per channel
High Output Voltage
VOH
IH = +5mA, VIN = VDD
Low Output Voltage
VOL
IL = -5mA, VIN = 0V
Input Offset Voltage
VOS
MIN
6
3.7
VDD 0.30
TA = +25°C
-14
TA = -40°C to +125°C
-17
IFB
At VIN = 9.5V
Voltage Gain
AV
RL = 10kΩ, CL = 50pF
VDD = 6V to 20V, VCM = VOUT = 3V
70
Common-Mode Input Voltage
Range
CMVR
Inferred from CMRR test
0.5
Common-Mode Rejection Ratio
CMRR
0.5V ≤ VCM ≤ VDD - 0.5V
60
IO
+17
0.01
PSRR
VOUT = 9.5V
(Note 2)
MAX9650AZK+
20
MAX9650AUA+
80
VDD = 15V, VOUT = 7.5V
MAX9650ATA+
V
+14
0.99
Power-Supply Rejection Ratio
mA
0.30
-0.2
Input Bias Current
V
8
3.5
+0.2
V
mV
mV/mA
1
µA
1.01
V/V
95
dB
VDD 0.5
80
UNITS
20
0.05
IOUT = 0mA to -80mA
LR
MAX
VDD 0.05
IOUT = 0mA to +80mA
Load Regulation
Continuous Output Current
TYP
V
dB
mA
±350
Transient Peak Output Current
IPK
(Note 3)
±1.3
A
Bandwidth
BW
-3dB
35
MHz
Slew Rate
SR
4V step, CL = 50pF, RL = 10kΩ, AV = +1V/V
40
V/µs
tS
Settling to 0.1% of VOUT, IL = 0 to 1000mA,
RS = 2.2Ω, CS = 0.1µF (Figure 1)
2.0
µs
Settling Time
2
_______________________________________________________________________________________
High-Current VCOM Drive Op Amps
for TFT LCDs
(VDD = 19V, VGND = 0V, VCM = VOUT = VDD/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Maximum Load Capacitance
CLOAD
(Note 4)
150
nF
Noninverting Input Resistance
RIN+
(Note 5)
100
MΩ
Inverting Input Resistance
RIN-
(Note 5)
100
MΩ
Input Capacitance
CIN
Thermal Shutdown
Thermal Shutdown Hysteresis
3
pF
+170
°C
15
°C
All devices are 100% production tested at TA = +25°C. All temperature limits are guaranteed by design.
Continuous output current is tested with one output at a time.
See the Thermal Shutdown with Temperature Hysteresis section.
A series resistor can extend load capacitance range. The settling time can be optimized by a small series resistance. See
the Applications Information section for more information.
Note 5: Inputs are protected by back-to-back diodes.
Note 1:
Note 2:
Note 3:
Note 4:
Typical Operating Characteristics
(VDD = 19V, GND = 0, VCM = VOUT = VDD/2, TA = +25°C, unless otherwise specified.)
2
1
0
TA = +25°C
-1
TA = -40°C
-2
7
5
4
-4
12
15
18
21
VOUT
(125mV/div)
2
0
SUPPLY VOLTAGE (V)
0.1A RESPONSE
3
1
9
IOUT
(500mA/div)
6
-3
6
MAX9650 toc05
TA = +125°C
MAX9650 toc02
INPUT OFFSET VOLTAGE (mV)
3
8
INPUT OFFSET VOLTAGE (mV)
MAX9650 toc01
4
LOAD TRANSIENT
SOURCING
INPUT OFFSET VOLTAGE DEVIATION
vs. TEMPERATURE
INPUT OFFSET VOLTAGE DEVIATION
vs. SUPPLY VOLTAGE
0.5A RESPONSE
1A RESPONSE
-50
-25
0
25
50
75
100
125
TIME (1μs/div)
TEMPERATURE (°C)
_______________________________________________________________________________________
3
MAX9650/MAX9651
ELECTRICAL CHARACTERISTICS (continued)
Typical Operating Characteristics (continued)
(VDD = 19V, GND = 0, VCM = VOUT = VDD/2, TA = +25°C, unless otherwise specified.)
SUPPLY CURRENT
vs. TEMPERATURE
IOUT
(500mA/div)
6
MAX9650 toc06
MAX9650 toc05
MAX9650 toc04
7
SUPPLY CURRENT (mA)
LOAD TRANSIENT
SINKING
LOAD TRANSIENT
SOURCING
8
IOUT
(500mA/div)
5
4
0.1A RESPONSE
1A RESPONSE
3
VOUT
(125mV/div)
2
VOUT
(125mV/div)
0.5A RESPONSE
1
0.5A RESPONSE
1A RESPONSE
0.1A RESPONSE
0
-50
-25
0
25
50
75
100
TIME (1μs/div)
TIME (1μs/div)
MAX9650 STEP RESPONSE
WITH VARIOUS CL
OPEN-LOOP GAIN AND PHASE
vs. FREQUENCY
125
TEMPERATURE (°C)
CL = 0.01μF
VOUT
5V/div
VOUT
5V/div
3
2
1
CL = 560pF
0
CL = 10pF
GAIN (dB)
5
CL = 100pF
-10
-1
-2
-3
CL = 56pF
0.01
0.1
1
FREQUENCY (MHz)
10
100
60
PHASE
0
0
-20
-60
-40
-120
-60
-180
-240
100E+0
1E+3
100E+3
1E+6
10E+3
FREQUENCY (Hz)
15
VOUT = 100mVP-P
RL = 10kΩ TO VDD/2
10
10E+6
100E+6
10,000pF
1000pF
100pF
0
-5
-10
10pF
-15
-5
-15
120
20
5
-4
-5
180
40
20
0
CL = 0.001μF
CL = 0.1μF
VOUT = 100mVP-P
RL = 10kΩ TO VDD/2
GAIN (dB)
CL = 0.01μF
10
240
SMALL-SIGNAL GAIN vs. FREQUENCY
WITH VARIOUS CL
MAX9650 toc11
CL = 0.0022μF
300
60
SMALL-SIGNAL GAIN
vs. FREQUENCY
MAX9650 toc10
20
360
CL = 100pF
80
-80
10E+0
2μs/div
CLOSED-LOOP SMALL-SIGNAL FREQUENCY
RESPONSE FOR VARIOUS CL
MAX9650 toc09
GAIN
100
VOUT
5V/div
CL = 0.022μF
100ms/div
4
VOUT
5V/div
CL = 2200pF
VIN
5V/div
15
VOUT
5V/div
CL = 10pF
VDD
10V/div
120
-6
-20
-7
100E+3
-25
100E+3
1E+6
10E+6
FREQUENCY (Hz)
100E+6
1E+6
10E+6
FREQUENCY (Hz)
_______________________________________________________________________________________
100E+6
PHASE (DEG)
MAX9650 toc08
IDD
10mA/div
MAX9650 toc12
MAX9650 toc07
GAIN (dB)
STARTUP WAVEFORM
VOLTAGE GAIN (dB)
MAX9650/MAX9651
High-Current VCOM Drive Op Amps
for TFT LCDs
High-Current VCOM Drive Op Amps
for TFT LCDs
PIN
MAX9650
SOT23
MAX9651
µMAX-EP, (µMAX-EP,
TDFN-EP TDFN-EP)
1
6
1
2
4
3
3
4
FUNCTION
NAME
OUTA
VCOM Output A
4
GND
Ground
3
INA+
Positive Input A
2
2
INA-
Negative Input A
5
7
8
VDD
Positive-Supply Input. Bypass VDD to GND with a 0.1µF capacitor as close as
possible to the device.
—
—
5
INB+
Positive Input B
—
—
6
INB-
Negative Input B
—
—
7
OUTB
VCOM Output B
—
1, 5, 8
—
N.C.
—
—
—
EP
No Connection. Not internally connected.
Exposed Pad (μMAX and TDFN Only). EP is internally connected to GND. Connect EP
to GND.
Detailed Description
The MAX9650/MAX9651 operational rail-to-rail
input/output amplifiers hold the VCOM voltage stable
while providing the ability to source and sink a high current quickly (1.3A) into a capacitive load such as the
backplane of a TFT-LCD panel.
Thermal Shutdown
with Temperature Hysteresis
The MAX9650/MAX9651 are capable of high output
currents and feature thermal-shutdown protection with
temperature hysteresis. When the die temperature
reaches +170°C, the device shuts down. When the die
cools down by 15°C, the device turns on again. In a
TFT-LCD application, the duty cycle is very low. Even
with high values of voltage and current, the power dissipation is low and the chip does not shut down.
19V
SUPPLY
*C2 = 0.1μF
*C1 = 10μF
19V
SUPPLY
VDD
MAX9650
VREF
LCD VCOM LOAD
IN_+
OUT_ VOUT_
IN_-
RS =
2.2Ω
CLCD =
0.1μF
**0V TO 2.2V
AT 50kHz
GND
*10μF and 0.1μF CAPACITORS AS CLOSE AS POSSIBLE TO THE PIN.
**(RS = RGEN) x CLCD x 6 < 2μs, WHERE RGEN = GENERATOR SOURCE IMPEDANCE.
Figure 1. Settling Time Test Circuit
_______________________________________________________________________________________
5
MAX9650/MAX9651
Pin Description
Applications Information
Output Load
The MAX9650/MAX9651 are designed to drive capacitive loads. A small value of series resistance improves
the performance of the device to ensure stability and
fast settling with very large or very small capacitive
loads. In many cases, this resistance is already present
due to connection resistance in the wiring and no additional physical resistor is necessary. For minimum
series resistance required for stability with capacitive
loading, see Figure 2.
Power Supplies and Bypass Capacitors
The MAX9650/MAX9651 operate from a 6V to 20V single supply or from ±4.5V to ±10V dual supplies. Proper
supply bypassing ensures stability while driving high
transient loads. The MAX9650/MAX9651 require a minimum 10µF (C1) and 0.1µF (C2) power-supply bypass
capacitors placed as close as possible to the powersupply pin (VDD). See Figure 3. For dual-supply operation, use 10µF and 0.1µF bypass capacitors on both
supplies (VDD and GND) with each capacitor placed as
close as possible to VDD and GND.
Layout and Grounding
The exposed pad on the µMAX® and TDFN packages
provide a low thermal resistance for heat dissipation.
Solder the exposed pad to a ground plane for best
thermal performance. Do not route traces under these
packages. For dual-supply operation, the exposed pad
(EP) can be electrically connected to the negative supply or it can be left unconnected.
16V
SUPPLY
2.0
*C2 = 0.1μF
1.8
*C1 = 10μF
19V
SUPPLY
1.6
RESISTANCE (Ω)
MAX9650/MAX9651
High-Current VCOM Drive Op Amps
for TFT LCDs
VDD
1.4
STABLE
1.2
MAX9650
1.0
VREF
TFT LCD
IN_+
OUT_
0.8
0.6
IN_-
0.4
UNSTABLE
0.2
**RS
TFT-LCD
CAPACITANCE
GND
0
10-7
10-6
10-5
10-4
CAPACITANCE (F)
Figure 2. Minimum Combined ESR/Series/Trace Resistance
Required for Stability of the MAX9650 in Response to
Capacitive Loads
*10μF and 0.1μF CAPACITORS AS CLOSE AS POSSIBLE TO THE PIN.
**RS MAY BE NEEDED FOR SOME APPLICATIONS.
Figure 3. Typical TFT-LCD Backplane Drive Circuit
Chip Information
PROCESS: BiCMOS
µMAX is a registered trademark of Maxim Integrated Products, Inc.
6
_______________________________________________________________________________________
High-Current VCOM Drive Op Amps
for TFT LCDs
N.C. 1
MAX9650
OUTA 1
+
5
VDD
GND 2
4
THIN SOT23
INA-
OUTA 1
8
N.C.
INA- 2
7
VDD
INA-
3
6
OUTA
INA+
GND 4
5
N.C.
INA+
INA+ 3
+ MAX9650
μMAX-EP
(TDFN-EP)
+
8
VDD
2
7
OUTB
3
6
INB-
GND 4
5
INB+
MAX9651
μMAX-EP
(TDFN-EP)
_______________________________________________________________________________________
7
MAX9650/MAX9651
Pin Configurations
MAX9650/MAX9651
High-Current VCOM Drive Op Amps
for TFT LCDs
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
8
PACKAGE TYPE
PACKAGE CODE
OUTLINE NO.
LAND
PATTERN NO.
5 SOT23
Z5+2
21-0113
90-0241
8 µMAX
U8E+2
21-0107
90-0145
8 TDFN-EP
T833+2
21-0137
90-0058
_______________________________________________________________________________________
High-Current VCOM Drive Op Amps
for TFT LCDs
_______________________________________________________________________________________
9
MAX9650/MAX9651
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
8L, μMAX, EXP PAD.EPS
MAX9650/MAX9651
High-Current VCOM Drive Op Amps
for TFT LCDs
21-0107
10
______________________________________________________________________________________
C
1
1
High-Current VCOM Drive Op Amps
for TFT LCDs
______________________________________________________________________________________
11
MAX9650/MAX9651
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
MAX9650/MAX9651
High-Current VCOM Drive Op Amps
for TFT LCDs
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
COMMON DIMENSIONS
12
PACKAGE VARIATIONS
MIN.
MAX.
PKG. CODE
N
D2
E2
e
JEDEC SPEC
b
A
0.70
0.80
T633-2
6
1.50±0.10
2.30±0.10
0.95 BSC
MO229 / WEEA
0.40±0.05
1.90 REF
D
2.90
3.10
T833-2
8
1.50±0.10
2.30±0.10
0.65 BSC
MO229 / WEEC
0.30±0.05
1.95 REF
SYMBOL
[(N/2)-1] x e
E
2.90
3.10
T833-3
8
1.50±0.10
2.30±0.10
0.65 BSC
MO229 / WEEC
0.30±0.05
1.95 REF
A1
0.00
0.05
T1033-1
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
L
0.20
0.40
T1033MK-1
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
k
0.25 MIN.
T1033-2
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
A2
0.20 REF.
T1433-1
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
T1433-2
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
T1433-3F
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
______________________________________________________________________________________
High-Current VCOM Drive Op Amps
for TFT LCDs
REVISION
NUMBER
REVISION
DATE
0
7/08
Initial release
1
10/08
Updated slew rate and added TDFN-EP package
1, 2, 6, 10, 11
2
5/09
Updated continuous output current specification
2
3
2/10
Added automotive part to Ordering Information, corrected units for input offset
voltage, and added figure for minimum series resistance
4
7/10
Removed extraneous information in the Electrical Characteristics table and
corrected typo in TOC 5
DESCRIPTION
PAGES
CHANGED
—
1, 2, 5, 6
2, 4
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 13
© 2010 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
MAX9650/MAX9651
Revision History