IXYS MXHV9910

IXYS
MXHV9910
Off-Line High Brightness LED Driver
Features:
General Description
• 8V to 400V Input Voltage Range
• High Efficiency
• Drives from 1 to Hundreds of LEDs in
Series/Parallel Combinations
• Regulated LED Drive Current
• Linear or PWM Brightness Control
• Resistor Programmable Oscillator Frequency
• SOIC-8 RoHS Compliant Package
The MXHV9910 is a high-efficiency off-line LED
driver. Manufactured using a dialectically isolated
process the MXHV9910 can operate from 8V to
400V. This highly versatile input operating voltage
enables a broad range of High Brightness (HB) LED
applications. The MXHV9910 drives an external
MOSFET at a fixed oscillator frequency set by an
external resistor. Peak constant current to an LED
string is maintained by modulating the MOSFET
GATE signal on and off through the external current
sense resistor connected to the CS input. Dimming
of and LED string is controlled by adjusting the duty
cycle of the PWM input, or applying a control
voltage from 0 to 250mV to the LD input.
Applications:
• Flat Panel Display RGB Backlighting
• Signage and Decorative LED Lighting
• DC/DC or AC/DC LED Driver Applications
Ordering Information
Part No.
HV991000-00
HV991041-00
Description
SOIC-8
SOIC-8 Tape & Reel
Qty
100
2500
Functional Block Diagram and Typical Application
8 - 400 V
VDD
MXHV9910
VDD
Voltage
Regulator
VIN
Voltage
Reference
ROSC
OSC
PWM
Control
LD
GND
GATE
CS
PWM_D
MXHV9910
Drawing No. HV991009
1
08/09/06
www.claremicronix.com
IXYS
MXHV9910
Absolute Maximum Ratings
Parameter
VIN to GND
CS
PD, PWM_D to GND
GATE to GND
VDDMAX
Thermal Resistance,
Junction to Ambient
Operating Ambient
Storage Temperature
Symbol
Maximum
-0.5 to +500
-0.3 to VDD+0.3
-0.3 to VDD +0.3
-0.3 to VDD+0.3
15
o
θJA
TA
TSTG
Units
V
V
V
V
V
C/W
-40 to +85
-55 to +150
o
C
C
o
Absolute Maximum Ratings are
stress ratings. Stresses in excess of
these ratings can cause permanent
damage to the device. Functional
operation of the device at these or
any other conditions beyond those
indicated in the operational sections
of this data sheet is not implied.
Exposure of the device to the
absolute maximum ratings for an
extended period may degrade the
device and affect its reliability.
Pin Description
Pin No. Pin Name
1
VIN
Description
Input Voltage 8V to 400V DC
2
CS
LED Current Sense input. Internal current sense threshold is set at 250mV. The
external sense resistor sets the maximum LED current.
3
GND
Device Ground
4
GATE
External MOSFET Gate Driver Output
5
PWM D
Low frequency PWM Dimming Control input with internal pull-down resistor.
6
VDD
7.8V regulated supply voltage output. Requires a storage capacitor to ground.
7
LD
Linear Dimming. Sets the current limit lower than the internal 250mV threshold
at the current sense comparator.
8
ROSC
Resistor to ground sets the oscillator / primary PWM frequency.
MXHV9910
Drawing No. HV991009
2
08/09/06
www.claremicronix.com
IXYS
MXHV9910
Electrical Characteristics
TA=25 oC unless otherwise specified.
Parameter
Input DC Voltage Range
Shut-Down mode supply
current
Internal DC Voltage Regulator
Maximum voltage to VDD pin
VDD current available for
external circuitry
PWM D input low voltage
PWM D input high voltage
PWM D pull-down resistance
Current sense threshold voltage
Symbol
VINDC
IINsd
VDD
VDDmax
IDD(ext)
REN
VCS(hi)
Condition
DC input voltage
PWM_D to GND
VIN = 15-400V
VIN = 15-400V, IDD(ext) = 0
Gate output open.
External voltage applied to
the VDD pin
VIN = Limited by package
power dissipation.
VIN = 8-400V
VIN = 8-400V
VGATE(hi)
IOUT = 10mA
GATE low output voltage
Oscillator frequency
Maximum Oscillator PWM Duty
Cycle
Linear Dimming Voltage
Range
Current Sense Blanking
Interval
Delay from CS trip to GATE lo
GATE output rise time
GATE output fall time
VGATE(lo)
fOSC
IOUT = -10mA
ROSC = 400kΩ
Typ
VIN = 15V
Units
V
1
mA
V
15
1.0
mA
0.8
2.4
125
250
VDD
-0.3
0.3
64
DMAXhf
VLD
Max
400
7.8
TA = -40 oC to +85 oC
GATE high output voltage
MXHV9910
Drawing No. HV991009
Min
8
0
V
V
kΩ
mV
V
V
kHz
85
%
250
mV
TBLANK
400
nS
tDELAY
tRISE
tFALL
300
30
30
nS
nS
nS
CGATE = 500pF
CGATE = 500pF
3
08/09/06
www.claremicronix.com
IXYS
MXHV9910
8-LEAD SOIC
MXHV9910
Drawing No. HV991009
4
08/09/06
www.claremicronix.com
IXYS
World Wide Sales Offices
IXYS Corporation
3540 Bassett Street
Santa Clara, CA 925054
Tel: 408-892-0700
Fax: 408-496-0670
e-mail:[email protected]
United Kingdom
IXYS Semiconductor Limited
Langley Park Way
Langley Park
Chippenham
Wiltshire SN 15 1GE - England
Tel: 44 1249 444524
Fax: 44 1249 659448
[email protected]
Micronix
An IXYS Company
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
Sales Offices ASIA / PACIFIC
Asian Headquarters
IXYS
Room 1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6368
[email protected]
[email protected]
SALES OFFICES AMERICAS
Eastern Region
[Eastern North America, Mexico, South America]
IXYS Corporation
Beverly, MA
Tel: 508-528-6883
Fax: 508-528-4562
[email protected]
Check the IXYS Website for the local sales
office nearest you. (www.ixys.com)
Central Region
[Central North America]
IXYS Corporation
Greensburg, PA
Tel: 724-836-8530
Fax: 724-836-8540
[email protected]
Western Region
[Western North America]
IXYS Coporation
Solana Beach, CA
Tel: 858-792-1101
[email protected]
http://www.claremicronix.com
SALES OFFICES EUROPE
European Headquarters
IXYS Semiconductor GMBH
Edisonstrasse 15
D- 68623 Lampertheim
Germany
Tel: 49-6206-503203
Fax: 49-6206-503286
[email protected]
MXHV9910
Drawing No. HV991009
IXYS cannot assume responsibility for use of any circuitry other than circuitry
entirely embodied in this IXYS product. No circuit patent licenses nor indemnity
are expressed or implied. IXYS reserves the right to change the specification and
circuitry, without notice at any time. The products described in this document are
not intended for use in medical implantation or other direct life support
applications where malfunction may result in direct physical harm, injury or death
to a person.
Specification: MXHV9910
©Copyright 2006, IXYS Corporation
All rights reserved. Printed in USA.
5
08/09/06
www.claremicronix.com