IS/ISO 9002 Lic# QSC/L- 000019.3 Continental Device India Limited An IS/ISO 9002 and IECQ Certified Manufacturer PNP SILICON PLANAR EPITAXIAL TRANSISTORS CSA683, CSA684 TO-237 Plastic Package Complementary CSC1383, CSC1384 AF Power Amplifier and Driver ABSOLUTE MAXIMUM RATINGS(Ta=25º C unless specified otherwise) DESCRIPTION SYMBOL CSA683 V 30 Collector -Base Voltage CBO VCEO Collector -Emitter Voltage 25 VEBO Emitter Base Voltage CSA684 60 50 UNIT V V 5.0 V Collector Current Peak ICP 1.5 A Collector Current Continuous IC 1.0 A *PC 1.0 W Junction Temperature Tj 150 ºC Storage Temperature Tstg - 55 to +150 ºC Collector Power Dissipation *PC=750mW/Potting type: PC=750mW ELECTRICAL CHARACTERISTICS (Ta=25º C unless specified otherwise) DESCRIPTION Collector Cut off Current Collector Emitter Voltage Collector -Base Voltage SYMBOL ICBO VCEO VCBO Emitter-Base Voltage DC Current Gain VEBO *hFE Collector Emitter Saturation Voltage Base Emitter Saturation Voltage Transition Frequency Output Capacitance VCE(sat) VBE(sat) fT Cob *hFE Classifications Continental Device India Limited TEST CONDITION VCB=20V, IE=0 IC=2mA, IB=0 CSA683 CSA684 IC=10µA, IE=0 CSA683 CSA684 IE=10µA, IC=0 IC=500mA, VCE=10V IC=1A, VCE=5V IC=500mA, IB=50mA IC=500mA, IB=50mA VCE=10V, IC=50mA VCB=10V, IE=0, f=1MHz Q : 85 - 170 R : 120 - 240 Data Sheet MIN TYP MAX 0.1 UNIT µA 25 50 V V 30 60 5 85 50 V V V 340 0.4 1.2 200 30 V V MHz pF S : 170 - 340 Page 1 of 3 CSA683, CSA684 TO-237 Plastic Package TO-237 Plastic Package F Mechanical Data h Ammo Pack Style D FEE Adhesive Tape on Top Side C1 H1 H Dimension With 'M' h1 Carrier Strip A H3 H2 Flat side 186 (7.3") Wo W1 L Uncontrolled Label W2 C2 Ho A W t1 F1 t F2 Do ") (13 332 F P2 43 (1.7 ") Po M 1 Beyond 'M' Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions in mm 2 3 K D D 3 2 1 SEC AA A A G MIN. A B C D E F G H K L J M 4.32 4.45 3.18 0.41 0.35 — PIN CONFIGURATION 1. BASE 2. COLLECTOR 3. EMITTER All dimensions in mm. 3 2 1 DIM C L J L SPECIFICATION ITEM E Solderability Ensured h1 A2 B h B (p) P A1 MAX. 5.33 5.20 4.19 0.55 0.50 5.40 1.14 1.40 — 2.54 12.70 — 5 DEG 1.14 1.53 1.982 2.082 SYMBOL BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT *1 FEED HOLE PITCH FEED HOLE CENTRE TO *2 COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS A1 A T P Po *3 COMPONENT ALIGNMENT SIDE VIEW *4 COMPONENT ALIGNMENT FRONT VIEW MIN. NOM. MAX. 4.0 4.8 3.9 TOL . 4.8 5.2 4.2 12.7 12.7 ±1 ± 0.3 P2 6.35 ± 0.4 F 5.08 + 0.6 - 0.2 TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION h h1 W Wo W1 0 0 18 6 9 HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER *5 TOTAL TAPE THICKNESS W2 Ho H1 L Do t 0.5 16 LEAD - TO - LEAD DISTANCE STAND OFF CLINCH HEIGHT LEAD PARALLELISM PULL - OUT FORCE F1, F2 H2 H3 | C1 - C2 | (P) 2.54 HEAT SINK WIDTH HEAT SINK HEIGHT HEAT SINK THICKNESS A2 B T1 1.0 1.3 ± 0.5 ± 0.2 + 0.7 - 0.5 ± 0.2 ± 0.5 32.25 11.0 4 ± 0.2 1.2 0.45 1.45 3.0 0.22 + 0.4 - 0.1 6N 5.40 2.54 0.45 NOTES 1. Maximum alignment deviation between leads will not to be greater than 0.2mm. 2. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches. 3. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive. 4. There will be no more than three (3) consecutive missing components in a tape. 5. A tape trailer, having at least three feed holes is provided after the last component in a tape. 6. Splices should not interfere with the sprocket feed holes. REMARKS *1 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH *2 TO BE MEASURED AT BOTTOM OF CLINCH *3 AT TOP OF BODY *4 AT TOP OF BODY *5 t1 0.3-0.6 Packing Detail PACKAGE STANDARD PACK INNER CARTON BOX OUTER CARTON BOX Details Net Weight/Qty Size Qty Size Qty Gr Wt TO-237 Bulk 1K/polybag 240 gm/1K pcs 3" x 7.5" x 7.5" 5K 17" x 15" x 13.5" 80K 26.2 kgs TO-237 T&A 2K/ammo box 725 gm/2K pcs 12.5" x 8" x 1.8" 2K 17" x 15" x 13.5" 32K 13.8 kgs Continental Device India Limited Data Sheet Page 2 of 3 Notes CSA683, CSA684 TO-237 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 e-mail [email protected] www.cdil.com CSA683_684Rev210302E Continental Device India Limited Data Sheet Page 3 of 3