General Purpose Relays PCB Relays OEG Miniature PCB Relay PCH n5 to 10A rating form A (NO) and 1 form C (CO) contact arrangements nSensitive coil available for 1 form A type n1 Typical applications Appliances, HVAC, refrigerators, microwave ovens F_PCH_B VZ Approvals Coil Data (continued) Technical data of approved types on request Coil versions, DC coil Coil Rated Operate Release Coil Rated coil codevoltagevoltagevoltage resistancepower VDCVDCVDC Ω±10 % mW Sensitive type (for form A type only) 003 3 2.250.1545 200 005 5 3.75 0.25 125 200 006 6 4.50 0.30 180 200 009 9 6.75 0.45 405 200 012 12 9.00 0.60 720 200 018 18 13.500.90 1620200 024 24 18.001.20 2880200 048 48 36.00 2.40 11520 200 VDE 119568, UL E82292, CQC08001023449 Contact Data Contact arrangement 1 Form A (NO) Rated voltage 30VDC, 277VAC Max. switching voltage 30VDC, 277VAC Rated current 5 to 10A Contact material AgSnO2 Min. recommended contact load 100mA, 5VDC Frequency of operation 360 ops./h Operate/release time max. 10/5ms Electrical endurance D type: 5A, 277VAC resistive, -30°C to +70°C100x103 ops. L type: 5A, 277VAC resistive, -30°C to +70°C 30x103 ops. D/L-WG type: 5A, 250VAC resistive, -40°C to +85°C 100x103 ops. Contact ratings Type IEC 61810 PCH-..2M-WG PCH-..D2-WG PCH-..D2M PCH-..L2M PCH-..D2 UL 508 PCH PCH Contact Load A (NO) A of C A (NO) A (NO) C (CO) 5A 250VAC res, 85°C 5A 250VAC res, 85°C 5A 250VAC res, 70°C 5A 250VAC res, 70°C 5A/3A 250VAC res, 40°C 100x103 100x103 100x103 30x103 30x103 A (NO) A (NO) 10A 125VAC res, 85°C 5A 250VAC general use, 85°C 100x103 100x103 Mechanical endurance, DC coil Coil Data Coil voltage range Operative range, IEC 61810 Coil insulation system according UL Cycles All figures are given for coil without pre-energization, at ambient temperature +23°C. Coil versions, DC coil Coil Rated Operate Release Coil Rated coil codevoltagevoltagevoltage resistancepower VDCVDCVDC Ω±10 % mW Standard type 003 3 2.100.1523 400 005 5 3.500.2563 400 006 6 4.200.3090 400 009 9 6.30 0.45 202 400 012 12 8.40 0.60 360 400 0181812.600.90 810400 024 24 16.801.20 1440400 048 48 33.602.40 5760400 Reference Data Reference All figures areData given for coil without pre-energization, at ambient temperature +23°C. 10x106 operations 3 to 48VDC 2 Class F *Above reference data is apply for 1 Form C / NO contact side, rated voltage: 277Vac / Coil power: 400mW. *Above reference data isthe apply for of 1 Form C / NO contactlife. side, rated voltage: 277Vac / Coil power: 400mW. *Please contact with us about graph expected electrical *Please contact with us about the graph of expected electrical life. 04-2012, Rev. 0412 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Ordering Information for Relays General Purpose Relays PCB Relays Example Part No. PCH -1 12 D 2 M H ,000 OEG 1. Basic Series PCH = Compact PCB mount typeMiniature PCB Relay PCH (Continued) 2. Poles 1= 1pole 3. Coil Voltage = 5VDC 12= 12VDC Ordering Information for Relays xample PartInsulation No. PCH05Data -1 12 D 2 M H ,000 06 =strength 6VDC 24 = 24VDC Initial dielectric = contacts 9VDC 48 = 750Vrms48VDC* between 09 open ype Ordering Information for Relays Power 4. Coil between contact and coil 4000Vrms Example Part No. D= 400mW (1a,1c) Clearance/creepage = 200mW (1a) 1. Basic Series between Lcontact and coil NO: ≥ 4.1mm / 6.3mm 12VDC Example Part No. PCH = Compact PCB mount type 5. Contact betweenMaterial contact and coil CO: ≥ 3.1mm / 3.9mm = 24VDC 2 =of relay base AgSnO2 2. Poles Tracking index 1. Basic Series = 48VDC* Contact Arrangement 1= = 1pole 6. standard type PTI 175 PCH Compact PCB mount type blank = 1c 3. Poles Coil Voltage WG txype PTI 250 2. M= 1a 5VDC 12= 12VDC 105== 1pole 7. Enclosure 06 = 6VDC 24 = 24VDC 3. Coil Voltage blank = Flux Proof 09 = = 9VDC 48 = 48VDC* Other Data 05 5VDC 12= 12VDC H= Wash TightChina RoHS, REACH, Halogen content 4. Coil Power Material compliance: EU RoHS/ELV, 06 = 6VDC 24 = 24VDC 8. Suffix D == 400mW (1a,1c) refer to the Product Compliance Support Center at 09 9VDC 48 = 48VDC* ,000 = Standard model L= 200mW (1a) www.te.com/customersupport/rohssupportcenter 4. Coil Power Other 5. Contact Material Ambient temperature -40°C to +85°C D= 400mW (1a,1c) = Custom model = AgSnO2 (1a) Category ofSuffix environmental protection L2 = 200mW IEC 61810 RTII - flux tight 6. Contact Contact Material Arrangement 5. *Coil voltage: 48VDC only can chose 400mW type. RTIII - wash tight 1c 2blank = = AgSnO 2 Shock resistance (functional) 10g M= 1a 6. Contact Arrangement Shock resistance (destructive) 100g Terminal assignment 7. Enclosure blank = 1c Weight7g Bottom view on solder blank = pins 1a Flux Proof M = (Bottom Wiring Diagram View) Outline Dimensions Resistance to soldering(mm) heat THT H = Wash Tight 7. Enclosure 1a 1c* IEC 60068-2-20 RTII: 270°C/10s 11c form C (CO) 1 form A (NO) 8. Suffix blank = Flux Proof RTIII: 260°C/5s ,000 = Standard model H= Wash Tight Packaging unittray/100 pcs., carton box/1000 pcs. Wiring Diagram (Bottom View) 8. Suffix Other Suffix== Custom model ,000 Standard model 1c 1a Other Suffix = PCH -1 PCH -1 *Coil voltage: 48VDC only can chose 400mW type. Custom model *Coil voltage: 48VDC only can chose 400mW type. PCB layout PC Board Layout (mm) (Bottom View) Bottom view on solder pins 1c Outline Dimensions (mm) PC Board Layout (mm) (Bottom View) 1c* 1c Outline Dimensions (mm) Dimensions 1c* W 1c W 1c 1a P 1c PC 1c 1 form C (CO) 1 form A (NO) 1a *1a Outline dimensions is omitted. Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm 3mm Min.: +/-0.3mm 1a *1a Outline dimensions is omitted. 1a *1a Outline dimensions is omitted. Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 © Copyright 2009 REV.B by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B tronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please call local TYCO Electronics for the latest version. This document is subject to change, Please call local TYCO Electronics for the latest version. 2 04-2012, Rev. 0412 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays OEG Miniature PCB Relay PCH (Continued) Product code structure Typical product code PCH-1 12 D2H ,000 Type PCH Miniature PCB Relay PCH Number of poles 1 1 pole Coil voltage Coil code: please refer to coil versions table (e.g. 05=5VDC) Coil sensitivity D Standard 400mW L 200mW (for 1 form A contact only) Contact material 2 AgSnO Contact arrangement Blank 1 form C (CO) contact M 1 form A (NO) contact Category of protection Blank Flux proof, vented cover H Wash tight, sealed plastic cover Insulation system designation Blank Class F system WG Class F system and for domestic appliances (IEC 60335-1, 4 Edition); Suffix ,000 Standard type Other types on request Product code Coil Sensitivity Cont.material Arrangement Enclosure Insulation Part number PCH-105D2H,000 5VDC Standard AgSnO2 1 form C (CO) Wash tight Class F 9-1440003-0 PCH-105L2M,000 Sensitive 1 form A (NO) Flux proof 1461352-2 PCH-105L2MH,000 Wash tight 1461353-2 PCH-105L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-2 PCH-106D2,000 6VDC Standard 1 form C (CO) Class F 9-1440003-8 PCH-109D2H,000 9VDC Wash tight 9-1440003-2 PCH-112D2,000 12VDC Flux proof 1440004 PCH-112D2H,000 Wash tight 9-1440003-3 PCH-112D2M,000 1 form A (NO) Flux proof 1461350-5 PCH-112D2M-WG Cl. F, IEC 60335-1 1721767-5 PCH-112D2-WG 1 form C (CO) 1721766-5 PCH-112L2M,000 Sensitive 1 form A (NO) Class F 1461352-5 PCH-112L2MH,000 Wash tight 1461353-5 PCH-112L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-5 PCH-124D2,000 24VDC Standard 1 form C (CO) Class F 1440004-1 PCH-124D2H,000 Wash tight 9-1440003-5 PCH-124D2M,000 1 form A (NO) Flux proof 1461350-6 PCH-124D2MH,000 Wash tight 1461351-6 PCH-124L2M,000 Sensitive Flux proof 1461352-6 PCH-124L2MH,000 Wash tight 1461353-6 PCH-124L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-6 PCH-148D2,000 48VDC Standard 1 form C (CO) Class F 1461410-2 04-2012, Rev. 0412 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3