F E D C B A NOTES: C 6,35 `0,3 n0,6 `0,05 (44x) 3,14 `0,3 5,99 +- 00,3 3,6 +- 00,25 8,23 +- 0,25 0 C 61,4 +- 0,3 0 POS. 1 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 47,04 `0,13 POS. 16 38,86 +- 0,23 0,02 21,1 +- 0,3 0 POS. 31 D (5:1) 0,4 9,2 +- 0,3 11,74 +- 0,4 0,3 14,28 +- 0,4 0,3 D 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 11. WASHERS: COPPER ALLOY; 80µin NICKEL 12. HEXLOCKING SCREWS: STAINLESS STEEL 13. FIXING-PLATE: PBT GF UL 94 V-0; BLACK 14. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 15. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 16. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 17. CONNECTOR IS PART MARKED: 15-00221o CONEC ABC 10° FIXING PLATE (glued) 3,2 `0,2 METAL BRACKET O-RING 13,5 +- 0,4 0,3 B 15-00221o CONEC ABC 4,6 4-40 UNC PCB SNAP 9,4 see note 17 SEALING COMPOUND 10,75 +- 0,4 0,3 B PRESS FOR FIXING ON PCB TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 4-40 UNC tolerance dim. in mm scale: material: A title: name drawn 18.11.09 Schmidt D-SUB HD MALE 90° appd. 27.11.09 Fischer 44pos. SOLDER PIN ANGLED metal bracket, fixing plate, hexlocking screw, snap dwg no: Inventor 10 DIN- d-old Origin rev. description date part no: name C A3 sh: 1 15K1A510 R D see notes date norm a 2:1 (5:1) B 15-00221o (see note 9) A F E D C B A P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) D D 47,04 `0,13 33,147 `0,05 1,143 `0,1 2,286 `0,1 1 16,51 `0,1 7,01 `0,03 + 0,1 n0,9 - 0 (44x) C 5,3 `0,1 P.C.B. EDGE 2,54 `0,1 2,54 `0,1 10,75 6,85 n3,1 `0,1 (2x) FRONTPANEL C RECOMMENDED PANEL CUT-OUT 42,5 `0,1 i 0,26 A B B ,4 ` R3 n3,1 `0,05 (2x) 11,4 `0,1 B 10° `1° 3 0,1 TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 47,04 `0,1 CUSTOMER APPROVAL DATE: A tolerance dim. in mm scale: material: A title: name drawn 18.11.09 Schmidt P.C.B HOLE DRILLINGS appd. 27.11.09 Fischer PANEL CUT-OUT D-SUB Male 44pos. HD Solder pin angled 90° dwg no: Inventor 10 DIN- d-old Origin rev. description date part no: name C A3 sh: 2 15K1A510 R D 4:1 see sheet1 date norm a i 0,26 B B see sheet 1 A