MMD DN_13

DN Series Crystal



Micro Miniature SM Crystal Frequency Range 12.000MHz to 40.000MHz RoHS Compliant ELECTRICAL CHARACTERISTICS
Parameter
Value
Frequency Range
Frequency Tolerance / Stability
Operating Temperature Range
Storage Temperature Range
Aging at +25°C
Shunt Capacitance
Load Capacitance
Equivalent Series Resistance (ESR)
Mode of Operation
Drive Level
12.000MHz to 40.000MHz
(See Part Number Guide for Option)
(See Part Number Guide for Option)
-40°C to +85°C
±3 ppm / year max
Less than 5pF
(See Part Number Guide for Option)
(See ESR Chart)
(See ESR Chart)
1µW to 100µW
ENVIRONMENTAL & MECHANICAL
SPEC
Shock
Solderability
Solvent
Resistance
Vibration
Gross Leak Test
Fine Leak Test
MSL
Reflow
Conditions
MIL-STD-883, Method 2002 Cond B
MIL-STD-883, Method 2003
EQUIVALENT SERIES RESISTANCE
CHART
MIL-STD-202, Method 215
Frequency Range
12.000MHz to 16.000MHz
16.000MHz to 30.000MHZ
30.000MHz to 40.000MHz
MIL-STD-883, Method 2007, Cond A
MIL-STD-883, Method 1014, Cond C
MIL-STD-883, Method 1014, Cond A2
Level 1 per IPC/JEDEC J-STD 20
260°C max 10 sec per
IPC/JEDEC J-STD 20
ESR
60Ω max
50Ω max
40Ω max
Mode / Cut
Fund / AT
Fund / AT
Fund / AT
PART NUMBER GUIDE
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Specifications subject to change without notice
Page 1 of 2
Pb RoHS
Free
Revision: DN121113A
Compliant
DN Series Crystal
1.
2.
3.
4.
5.
APPLICABLE STANDARDS / SPECIFICATIONS: ANSI Y14.5M, DIMENSIONS
AND TOLERANCES.
DIMENSIONS ARE MILLIMETERS [INCHES]. MILLIMETERS ARE THE
CONTROLLING DIMENSIONS, INCHES ARE FOR REFERENCE ONLY.
THE PIN NUMBERS ARE FOR REFERENCE ONLY AND ARE NOT TO BE
MARKED ON THE UNIT.
AN EXTERNAL BYPASS CAPACITOR IS RECOMMENDED.
TOLERANCES ARE ±0.25 [.010] FOR TWO PLACE DECIMALS AND ±0.5
[.02] FOR ONE PLACE DECIMALS.
DO NOT SCALE DRAWING
Mechanical Dimensions
Specifications subject to change without notice
Page 2 of 2
Revision: DN121113A