MAXIM DS4266D+

Rev 0; 10/08
DDR Clock Oscillator
The DS4266 surface-mount ceramic crystal oscillator is
part of Maxim’s DS4-XO crystal oscillator product family. The DS4266 is a 266MHz crystal oscillator designed
to support high-performance DDR memory applications
that require a stable, low-jitter, and tight duty-cycle
clock source. The device provides an overall accuracy
and stability better than ±50ppm, including aging. Jitter
performance is better than 0.7psRMS typically over a
12kHz to 20MHz bandwidth, and duty-cycle performance is better than 48%/52%.
The DS4266 has an output frequency of 266MHz, and it
supports LVDS and LVPECL output types. The DS4266
is constructed using a fundamental crystal in conjunction with high-performance silicon germanium PLL technology, enabling very low phase noise and phase jitter
performance. The device operates from a 3.3V ±5%
power supply and consumes a maximum current of
100mA.
The DS4266 is packaged in a miniature 5mm x 3.2mm
x 1.49mm, 10-lead LCCC ceramic package, making it
suitable for applications where board space is critical.
Applications
Features
♦ < 0.7psRMS (typ) from 12kHz to 20MHz Jitter
♦ LVDS or LVPECL Output Types
♦ 3.3V Operating Voltage
♦ 5.0mm x 3.2mm x 1.49mm, 10-Pin LCCC Ceramic
Package
♦ -40°C to +85°C Operating Temperature Range
♦ Lead-Free/RoHS Compliant
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
DS4266D+
-40°C to +85°C
10 LCCC
DS4266P+
-40°C to +85°C
10 LCCC
+Denotes a lead-free/RoHS-compliant package. The lead finish
is JESD97 category e4 (Au over Ni) and is compatible with both
lead-based and lead-free soldering processes.
Pin Configuration and Selector Guide appear at end of
data sheet.
DDR Memory Clock Source
Typical Operating Circuits
VCC
0.1μF
OUTP
VCC
0.1μF
0.01μF
DS4266
50Ω
DS4266
100Ω
OE
OUTP
0.01μF
PECL_BIAS
VCC - 2.0V
50Ω
OE
GND
OUTN
LVDS OPTION
GND
OUTN
LVPECL OPTION
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1
DS4266
General Description
DS4266
DDR Clock Oscillator
ABSOLUTE MAXIMUM RATINGS
Power-Supply Voltage (VCC) .......................................-0.3V, +4V
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range ...............................-55°C to +85°C
Soldering Temperature Profile
(3 passes max of reflow) ......................Refer to the IPC/JEDEC
J-STD-020 Specification.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = 3.135V to 3.465V, TA = -40°C to +85°C, unless otherwise noted.)
PARAMETER
Operating Voltage Range
SYMBOL
VCC
ICC_D
Operating Current
Output Frequency
CONDITIONS
(Note 1)
MIN
TYP
MAX
UNITS
3.135
3.3
3.465
V
52
75
LVDS, output loaded or unloaded
ICC_PU
LVPECL, output unloaded
49
70
ICC_PI
LVPECL, output load 50 at VCC - 2.0V
74
100
f OUT
fNOM
Oscillator Startup Time
t STARTUP
(Note 2)
Frequency Stability
fTOTAL
Over temperature range, aging, load,
supply, and initial tolerance (Note 3)
-50
Frequency Stability Over
Temperature with Initial Tolerance
fTEMP
VCC = 3.3V
-35
Initial Tolerance
f INITIAL
Frequency Change Due to VCC
f VCC
Frequency Change Due to Load
Variation
fLOAD
Aging (15 Years)
fAGING
Jitter
JRMS
VCC = 3.3V, TA = +25°C
VCC = 3.3V ±5%
fNOM
MHz
50
ms
+50
ppm
+35
ppm
±20
-3
±10% variation in termination
resistance
ppm
+3
±1
-7
0.7
Integrated phase RMS; 12kHz to 20MHz,
VCC = 3.3V, TA = +25°C
0.7
Integrated phase RMS; 12kHz to 80MHz,
VCC = 3.3V, TA = +25°C
1.0
ppm/V
ppm
+7
Integrated phase RMS; 12kHz to 5MHz,
VCC = 3.3V, TA = +25°C
mA
ppm
ps
Input-Voltage High (OE)
VIH
(Note 1)
0.7 x
VCC
VCC
V
Input-Voltage Low (OE)
VIL
(Note 1)
0
0.3 x
VCC
V
-50
+5.0
μA
Input Leakage (OE)
2
ILEAK
GND OE VCC
_______________________________________________________________________________________
DDR Clock Oscillator
(VCC = 3.135V to 3.465V, TA = -40°C to +85°C, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
1.475
V
425
mV
LVDS
Output High Voltage
VOHLVDSO
100 differential load (Note 1)
Output Low Voltage
VOLLVDSO
100 differential load (Note 1)
Differential Output Voltage
|VODLVDSO|
100 differential load
Output Common-Mode Voltage
Variation
VLVDSOCOM
100 differential load
150
mV
Change in Differential Magnitude
or Complementary Inputs
|VODLVDSO|
100 differential load
25
mV
Offset Output Voltage
Differential Output Impedance
VOFFLVDSO
L VSSLVDSO
Output Current
Output Rise Time (Differential)
Output Fall Time (Differential)
Duty Cycle
100 differential load (Note 1)
R OLVDSO
0.925
V
250
1.125
1.275
V
80
140
OUTN or OUTP shorted to ground and
measure the current in the shorting path
40
LLVDSO
OUTN or OUTP shorted together
6.5
tRLVDSO
20% to 80%
175
tFLVDSO
80% to 20%
DCYCLE_LVDS
ps
175
48
mA
ps
52
%
Propagation Delay from OE Going
Low to Logical 1 at OUTP
t PA1
200
ns
Propagation Delay from OE Going
High to Output Active
t P1A
200
ns
LVPECL
Output High Voltage
VOH
Output connected to 50 at PECL_BIAS
at VCC - 2.0V
VCC 1.085
VCC 0.88
V
Output Low Voltage
VOL
Output connected to 50 at PECL_BIAS
at VCC - 2.0V
VCC 1.825
VCC 1.62
V
Differential Voltage
VDIFF_PECL
Output connected to 50 at PECL_BIAS
at VCC - 2.0V
0.595
Rise Time
tR-PECL
Fall Time
tF-PECL
Duty Cycle
DCYCLE_PECL
0.710
V
200
ps
200
48
ps
52
%
Propagation Delay from OE Going
Low to Output High Impedance
t PAZ
200
ns
Propagation Delay from OE Going
High to Output Active
t PZA
200
ns
Note 1: All voltages referenced to ground.
Note 2: AC parameters are guaranteed by design and not production tested.
Note 3: Frequency stability is calculated as: ΔfTOTAL = ΔfTEMP + ΔfVCC x (3.3 x 5%) + ΔfLOAD + ΔfAGING.
_______________________________________________________________________________________
3
DS4266
ELECTRICAL CHARACTERISTICS (continued)
Single-Sideband Phase Noise at fO = fNOM
SINGLE-SIDEBAND PHASE NOISE AT fO = fNOM (dBc/Hz)
fM =
266MHz
10Hz
-65
100Hz
-95
1kHz
-113
10kHz
-113
100kHz
-118
1MHz
-137
10MHz
-149
20MHz
-153
Typical Operating Characteristics
(VCC = +3.3V, TA = +25°C, unless otherwise noted.)
55
DS4266 toc01
15
13
10
8
5
3
0
-3
-5
-8
-10
-13
-15
-18
-20
+85°C
+40°C
+70°C
+25°C
DS4266 toc02
OPERATING CURRENT
vs. OPERATING VOLTAGE
FREQUENCY vs. TEMPERATURE
53
ICC (mA)
fOUT DEVIATION (ppm)
DS4266
DDR Clock Oscillator
50
0°C
48
-40°C
-40
-20
0
20
40
60
80
45
3.135 3.185 3.235 3.285 3.335 3.385 3.435
TEMPERATURE (°C)
VCC (V)
Pin Description
PIN
4
NAME
FUNCTION
1
OE
2, 7–10
N.C.
No Connection. Must be floated.
Active-High Output Enable. Has an internal pullup 100k resistor.
3
GND
Ground
4
OUTP
Positive Output for LVPECL or LVDS
5
OUTN
Negative Output for LVPECL or LVDS
6
VCC
—
EP
Supply Voltage
Exposed Paddle. Do not connect this pad or place exposed metal under the pad.
_______________________________________________________________________________________
DDR Clock Oscillator
DS4266
VCC
OE
X1
THREESTATE
PHASE
DET
X2
LC-VCO
FILTER
OUTP
/n
OUTSELN
OUTDRV
OUTN
/m
DS4266
GND
Figure 1. Functional Diagram
Detailed Description
The DS4266 consists of a fundamental-mode crystal
and synthesizer IC packaged in a 5mm x 3.2mm x
1.49mm, 10-pin LCCC ceramic package. The device
produces a frequency output of 266.00MHz. Two differential output types are available: LVDS and LVPECL.
The device output can be enabled or disabled through
the OE signal input. When the OE signal is low, LVPECL
outputs go to the PECL_BAS level of VCC - 2.9V, while
the LVDS outputs are a logical 1. See Figures 2 and 3
for LVDS and LVPECL output timing diagrams.
Additional Information
For more available frequencies in the DS4-XO family,
refer to the DS4125 data sheet at www.maximic.com/DS4125.
0.7 x VCC
OE
0.7 x VCC
0.3 x VCC
tP1A
tPA1
OE
0.3 x VCC
tPZA
tPAZ
OUTP
OUTP
OUTN
OUTN
Figure 2. LVDS Output Timing Diagram When OE Is Enabled
and Disabled
PECL_BIAS
PECL_BIAS
PECL_BIAS
PECL_BIAS
Figure 3. LVPECL Output Timing Diagram When OE Is Enabled
and Disabled
_______________________________________________________________________________________
5
DS4266
DDR Clock Oscillator
Selector Guide
OUTPUT TYPE
TOP
MARK
±50
LVDS
66D
±50
LVPECL
66P
FREQUENCY (NOM)
(MHz)
FREQUENCY
STABILITY (ppm)
DS4266D+
266
DS4266P+
266
PART
+Denotes a lead-free/RoHS-compliant package. The lead finish is JESD97 category e4 (Au over Ni) and is compatible with both leadbased and lead-free soldering processes.
Pin Configuration
SUBSTRATE CONNECTED TO GROUND
PROCESS: BiPOLAR SiGe
TOP VIEW
N.C.
Chip Information
N.C.
+
OE
6
1
Thermal Information
VCC
THETA-JA (°C/W)
N.C.
2
GND
3
DS4266
*EP
5
OUTN
4
OUTP
90
Package Information
For the latest package outline information and land patterns, go
to www.maxim-ic.com/packages.
N.C.
N.C.
(5.00mm × 3.20mm × 1.49mm)
PACKAGE TYPE
PACKAGE CODE
DOCUMENT NO.
10 LCCC
—
56-G5032-002
*EXPOSED PAD
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
6 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2008 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.