DS52-0001 Low Cost Two-Way SMT Power Divider 824-960 MHz Features • • • • • • • Rev. V4 Functional Block Diagram Small Size and Low Profile Excellent Amplitude and Phase Balance Superior Repeatability Typical Insertion Loss 0.5 dB Typical Isolation 23 dB 1 Watt Power Handling SOIC-8 Package Description M/A-COM’s DS52-0001 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other communication applications where size and PCB real estate are a premium. Available in tape and reel. The DS52-0001 is fabricated using a passiveintegrated circuit process. The process features full-chip passivation for increased performance and reliability. Pin Configuration Ordering Information Pin No. Function 1 GND 2 RF-IN Part Number Package 3 GND DS52-0001 Bulk Packaging 4 GND DS52-0001TR 1000 piece reel 5 RF-1 (out) DS52-0001SAM Sample Test Board 6 GND 7 GND 8 RF-2 (out) Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0001 Low Cost Two-Way SMT Power Divider 824-960 MHz Rev. V4 Electrical Specifications1: TA = +25°C Parameter Insertion Loss Above 3.0dB Isolation VSWR Input Output Amplitude Balance Phase Balance Units Min Typ Max dB — 0.5 0.6 dB 15 23 — — — — — 1.35:1 1.25:1 1.5:1 1.4:1 dB — 0.05 0.15 Deg. — 0.5 1.5 1. All specifications apply with a 50-Ohm source and load impedance. Absolute Maximum Ratings 2,3 Parameter Input Power4 Absolute Maximum 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. 3. 4. Recommended PCB Configuration Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With Internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0001 Low Cost Two-Way SMT Power Divider 824-960 MHz Rev. V4 Typical Performance @ +25ºC Insertion Loss vs. Frequency Isolation vs. Frequency 0.7 25 Isolation (dB) Insertion Loss (dB) 0.6 0.5 0.4 0.3 0.2 0.1 20 15 10 5 0 0.0 824 824 858 892 926 960 926 960 Phase Balance vs. Frequency Relative to RF1 0.20 1.5 Input Phase Balance (Deg) Output 1.4 VSWR 892 Fre que ncy (MHz ) Fre que ncy (MHz ) VSWR vs. Frequency 858 1.3 1.2 1.1 1.0 824 858 892 Fre que ncy (MHz ) 926 960 0.15 0.10 0.05 0.00 824 858 892 926 960 Fre que ncy (MHz ) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0001 Low Cost Two-Way SMT Power Divider 824-960 MHz Rev. V4 SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.