MURATA DST9NC52A271

Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Standard Type
Data Sheet
1
Leaded EMIFILr (Three-terminal Capacitor type)
Standard Type
DSN9N/DST9N Series
DSN9N Series
c Dimensions
c Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
4.0 max.
9.5 max.
270pF
2200pF
2.5±0.5
Insertion Loss (dB)
1.5 max.
10.0 max.
20
I
1.0±0.5
5.0±0.5
ø0.65
GND
I
Q55 Type: 25.0 min.
Q56 Type: 6.0±1.0
Q54 Type: 4.0±0.5
40
22000pF
60
80
100
0.01
0.1
1
(in mm)
10
Frequency (MHz)
100
1000
c Rated Value (p: lead type/packaging code)
Part Number
Capacitance
Rated Voltage
Operating
Temperature Range
Rated Current
DSN9NC52A271p
270pF ±20%
100Vdc
7A
-25 to +85°C
DSN9NC52A222p
2200pF ±20%
100Vdc
7A
-25 to +85°C
DSN9NC51H223p
22000pF 50/-20%
50Vdc
7A
-25 to +85°C
Rated current is 6A for taping type and its lead diameter is phi 0.6mm and three terminal in line arrangement.
DST9N Series
c Dimensions
c Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
4.0 max.
9.5 max.
2200pF
270pF
Insertion Loss (dB)
1.5 max.
15.5 max.
20
Ferrite bead
40
60
I
2.5±0.5
22000pF
I1
5.0±0.5
1.25±0.5
80
ø0.65
GND
Q55 Type: I=25.0 min.
Q50 Type: I1=4.0±0.5
100
0.01
0.1
1
10
100
1000
Frequency (MHz)
(in mm)
Continued on the following page.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Standard Type
Data Sheet
2
Continued from the preceding page.
c Rated Value (p: lead type/packaging code)
Capacitance
Rated Voltage
Rated Current
Operating
Temperature Range
DST9NC52A271p
270pF ±20%
100Vdc
7A
-25 to +85°C
DST9NC52A222p
2200pF ±20%
100Vdc
7A
-25 to +85°C
DST9NC51H223p
22000pF 50/-20%
50Vdc
7A
-25 to +85°C
Part Number
Rated current is 6A for taping type and its lead diameter is phi 0.6mm and three terminal in line arrangement.
c Equivalent Circuit
c Equivalent Circuit
DSN9N Series
DST9N Series
GND
GND
No polarity.
No polarity.
c Packaging
Minimum Quantity
Minimum Order Quantity (order in sets only) (Pcs.)
Part Number
Ammo Pack
ø320mm
Paper reel
DSN9 Series
2000
—
DST9 Series
1000
—
Bulk (Bag)
250 Q55
500 Q54/Q56
200 Q55
250 Q50/Q52
Lead Type/Packaging
Code
Lead Type
Q55B
Q50B
Q52B
Straight
Lead Length* (in mm)
All series
4.0±0.5
DST9N/H
6.0±1.0
Q54B
4.0±0.5
Q56B
6.0±1.0
T41B
T51B
Incrimp
Q92A
Straight
U31A
4.0±0.5
Incrimp
DSN6/9, DSS6
DSS6N
25.0 min.
DSp6, DSN9N/H
16.5±1.0
18.5±1.0
Q93A
U21A
DST9N
Bulk
20.0±1.0
Q91A
Series
Packaging
25.0 min.
Ammo Pack
16.5±1.0
All series
DSS6N
18.5±1.0
*Lead Distance between Reference and Bottom Planes except Bulk.
Continued on the following page.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Standard Type
Data Sheet
3
Continued from the preceding page.
c Caution · Notice
!Caution
o Rating
Do not use products beyond the rated current and rated voltage as this
may create excessive heat and deteriorate the insulation resistance.
o Soldering and Mounting
1. Mounting holes should be designed as specified in these
specifications. Other designs than those shown in these
specifications may cause cracks in ceramics that may
lead to smoking or firing.
2. DSN9/DST9/DSN9H/DST9H/VFS9V Series
Mounting for PCB. (Applis only to bulk type.)
The form of the mounting hole of the bulk item is a triangle.
The product should be inserted and soldered to each hole in
the correct way as in Fig.2. (The center terminal and the other
terminals become parallel when viewing the product from the
side.) Smoking and firing maybe caused by incorrect mounting
as in Fig.3. (The center terminal and the other terminals cross
when viewing the product from the side.)
Marking Side
Center Terminal
(Ground Terminal)
Fig.2 Right Way
Fig.3 Wrong Way
Continued on the following page.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Standard Type
Data Sheet
4
Continued from the preceding page.
Notice
o Storage and Operating Conditions
<Operating Environment>
1. Do not use products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
2. Do not use products near water, oil or organic
solvents. Avoid environments where dust or dirt may
adhere to the product.
<Storage and Handling Requirements>
1. Storage Period
Use the products within 12 months after delivery.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to 40 degrees C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
(3) When restoring taping type (BL01RN1A1F1J),
please attach the spacer between the flanges of the
reel. The spacer is corrugated paper that is attached
when shipping.
<Using EMIGUARDr effectively>
1. Terminal (with mark) should be properly connected to
the line of incoming electrostatic surge. (There is
polarity.) Otherwise, no effect in ESD suppression can
be expected (VFR3V).
Example of input terminal
Incoming
Electrostatic Surges
Example of output terminal
Incoming
Electrostatic Surges
2. Products should be used at rated voltage or less and
rated current or less.
3. Products should not be applied for the absorption of
surges that have large energy (e.g., induced lightning
surges, switching surges) because it is designed for the
absorption of electrostatic surges (VFR3V).
4. Electrostatic testing should be done on the following
conditions (VFR3V).
Ns;#2s62 ]2 < 8.0 x105
n: Times applied
C: Charging Capacitance (pF)
V: Testing Voltage (kV)
R: Charging Resistance (Ω)
o Soldering and Mounting
1. Washing
Failure and degradation of a product are caused
by the washing method. When you wash in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering
methods. Please solder by the standard soldering
conditions shown in the mounting information.
3. Other
Noise suppression levels resulting from Murata's
EMI suppression filters EMIFILr may vary, depending
on the circuits and ICs used, type of noise, mounting
pattern, lead wire length, mounting location, and other
operating conditions. Be sure to check and confirm in
advance the noise suppression effect of each filter, in
actual circuits, etc. before applying the filter in a
commercial-purpose equipment design.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/