SMD 18-038/RSGHBHC1-S01/2T Features Package in 8mm tape on 7〞diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow Solder process Full-color type Pb-free Component solderable surface finish is Gold Component weight is 1.0 mg RoHS compliant Description The 18-038 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Moreover, with its black PCB, the 19-037 possess an ideal solution for high-contract and high-resolution indoor signage display. Applications 1 Revision Indoor signage display applications Indoor decorating and entertainment design Flat backlight for LCD, switch and symbol Indicator and backlighting for all consumer electronics : 1 © 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. IssueRelease Date:2011-02-23 17:07:30.0 Copyright No: DSE-0004868_v1. www.everlight.com LifecyclePhase: Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Device Selection Guide Chip Materials Emitted Color AlGaInP Brilliant Red InGaN Brilliant Green InGaN Brilliant Blue Resin Color Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR V Forward Current IF Power Dissipation Pd Junction Temperature Tj 5 RS:25 GH:20 BH:20 RS:60 GH:50 BH:50 RS:60 GH:70 BH:70 100 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 R:2000 G:150 B:150 ℃ Peak Forward Current (Duty 1/10 @1KHz) ESD (Classification acc. AEC Q101) Soldering Temperature 2 Copyright Revision :1 © LifecyclePhase: IFP ESDHBM Tsol mA mA mW ℃ V Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Viewing Angle Iv Min. Typ. 130 ----- 226 GH 160 ----- 336 BH 40 ----- 84 ----- 120 RS Peak Wavelength GH Λd ----- Δλ RS 619.0 GH 521.5 BH 466.0 GH Reverse Current VF IR IF=20mA ----- deg IF=20mA 518 ----- nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA μA VR=5V 628.0 ----- 529 473.5 20 ----- BH Forward Voltage mcd 468 RS Spectrum Radiation Bandwidth Condition 632 BH Dominant Wavelength Unit RS 2θ1/2 Λp Max. 25 ----- 25 RS 1.7 2.0 2.4 GH 2.7 3.3 3.7 BH 2.7 3.3 3.7 ----- ----- 10 Note: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright Revision :1 © LifecyclePhase: Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Floating Bin(RS) Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition A B C 130 156 188 156 188 226 mcd IF =20mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition 1 2 3 619 622 625 622 625 628 nm IF =20mA Bin Code Min. Max. Unit Condition A B C D 160 194 233 280 194 233 280 336 mcd IF =20mA Floating Bin(GH) Bin Range of Luminous Intensity Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition 1 2 3 521.5 524.0 526.5 524.0 526.5 529.0 nm IF =20mA Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 4 Copyright Revision :1 © LifecyclePhase: Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Floating Bin(BH) Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition A B C D 40 48 58 70 48 58 70 84 mcd IF =20mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition 1 2 3 466.0 468.5 471.0 468.5 471.0 473.5 nm IF =20mA Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 5 Copyright Revision :1 © LifecyclePhase: Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Typical Electro-Optical Characteristics Curves Spectrum Distribution Ta=25°C Relative luminous intensity (%) 100 GREEN RED BLUE 75 50 25 0 400 450 500 550 650 600 700 Wavelength λ (nm) Forward Current Derating Curve Ta=25°C 5 50 Relative luminous intensity Forward Current IF (mA) Forward Current vs. Forward Voltage 40 30 25 20 RED BLUE GREEN 10 0 1.6 2.0 3.8 2.4 2.8 3.0 3.4 Forward Voltage VF (V) 4.2 4 3 RED BLUE 2 GREEN 1 0 20 0 40 60 80 100 Forward Current I FP (mA) Radiation Diagram Ta=25°C 0° 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 0.7 0.5 0.3 6 Copyright Revision :1 © LifecyclePhase: 0.1 0.2 0.4 0.6 70° 80° 90° Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Ambient Temperature vs. Total Power Dissipation Ambient Temperature vs. Power Dissipation 250 Total Power Dissipation (mW) Total Power Dissipation (mW) 250 200 150 BLUE 100 GREEN 50 0 RED 0 20 40 60 85 Ambient Temperature Ta (°C) 7 Copyright Revision :1 © LifecyclePhase: 100 200 150 100 50 0 0 20 40 60 85 100 Ambient Temperature Ta (°C) Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright Revision :1 © LifecyclePhase: Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer ’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions 9 Copyright Revision :1 © LifecyclePhase: Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm 10 Copyright Revision :1 © LifecyclePhase: Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 168Hrs under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 11 Copyright Revision :1 © LifecyclePhase: Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever DATASHEET SMD 18-038/RSGHBHC1-S01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C 12 Copyright Revision :1 © LifecyclePhase: Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Release Date:2011-02-23 17:07:30.0 2010, Everlight All Rights Reserved. Release Date : 21-Feb-2011. Issue No: DSE-0004868_v1. www.everlight.com Expired Period: Forever