REV REVISED PER ER11418 2. MATERIAL SPECIFICATIONS: B05 PER UNS 53800. BY APPD DATE DAO E DESCRIPTION DAO 01/05/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000. 3. FINISH SPECIFICATIONS: .000030 MIN. GOLD PER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290. 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 20 AMPS MAX 5. SUGGESTED FOR USE WITH 14 GA WIRE OR EQUIVALENT. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. .218 5.54 ACROSS FLATS .314 7.98 .144 3.66 .275 6.99 ACCEPTS Ø.144 PIN .095±.003 2.41±.08 .275 6.99 .085 MAX RECOMMENDED CABLE TRIM DIMENSIONS SCALE: 2:1 CATALOG P/N: 01438 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 8:1 THIRD ANGLE CUSTOMER SALES DRAWING DRAWN KJT APPROVED JEM DMF029 B Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 DATE APPROVED 11/08/02 RAB DATE APPROVED 11/08/02 JED DATE 11/08/02 DATE 11/08/02 POWERSNAP RIGHT ANGLE SOLDER MOUNT 20 AMP, 14 AWG A SD01348 SHT OF 1 1 REV E