DESCRIPTION B REVISED PER ER7306 2. MATERIAL SPECIFICATIONS: B05 PER UNS 53800 BY APPD DATE CWB REV CWB 04/14/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000. 3. FINISH SPECIFICATIONS: .000030 MIN. GOLD OER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290. 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 20 AMP. 5. FOR USE WITH 14 GA WIRE OR EQUIVALENT. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. .33 8.38 .040 1.02 .020 .51 .218 5.54 .250 6.35 4X .078 1.98 CATALOG P/N: 01307 .220 5.59 MIN. PAD PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 8:1 WinchesterElectronics Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING RECCOMENDED P.C. BOARD LAYOUT SCALE 4:1 DRAWN JWH APPROVED JMC DATE APPROVED 10/16/00 JED DATE APPROVED 10/18/00 KJT 40 AMP POWER RECEPTACLE DATE 10/18/00 DATE 10/18/00 A SD01307 SHT 1 OF 1 REV B