SAW Bandpass Filter F2G17 Features TDSCDMA applications Usable bandwidth of 15 MHz No impedance matching require for operation at 50 Ω SMD Package 2.0 mm × 1.6 mm Single-ended Operation RoHS Compliant Package Dimensions 4 3 3 I 4 A 1 2 2 1 Pin Configurations 1 Input 2 Case Ground 3 Output 4 Case Ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range ℃ -30 25 85 Storage Temperature Range ℃ -40 - 95 Power Handling Capability dBm - - 10 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G17 Rev. Date 2009-11-18 Rev. NC9014-AS01 1/7 SAW Bandpass Filter F2G17 Specifications Fo = 2017.5 MHz Terminating source impedance : 50Ω and matching network Terminating load impedance : 50Ω and matching network Minimum Typical Maximum Unit Center Frequency ( Fc ) - 2017.5 - MHz Insertion Loss (In Fc +/- 7.5 MHz) - 1.5 2.5 dB Amplitude Ripple (In Fc +/- 7.5 MHz) - 0.2 1.0 dBp-p VSWR (In Fc +/- 7.5 MHz) - 1.3 2.0 30.0 33.0 - 1850.0 MHz ~ 1950.0 MHz 20.0 27.0 - 2085.0 MHz ~ 2400.0 MHz 19.0 21.0 - 2400.0 MHz ~ 2430.0 MHz 29.0 33.0 - 2430.0 MHz ~ 2790.0 MHz 25.0 32.0 - 2790.0 MHz ~ 2820.0 MHz 30.0 32.0 - 2820.0 MHz ~ 3000.0 MHz 25.0 34.0 - -30 25 85 ℃ 10 dBm Relative Attenuation DC ~ 1850.0 MHz Temperature Range (Operational) Input RF Power (In Fc +/- 7.5 MHz) Input/Output Impedance dB 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G17 Rev. Date 2009-11-18 Rev. NC9014-AS01 2/7 SAW Bandpass Filter F2G17 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration I A 1) 2) 3) 1) Part Number Mark 2) Year Code 3) Date Code : Year Code (2006→6 ,…, 2009→9) : Date Code (W01→A ,…, W26→Z, W27→a ,…, W52→z) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G17 Rev. Date 2009-11-18 Rev. NC9014-AS01 3/7 SAW Bandpass Filter F2G17 Typical Performance ( at 25℃ ℃) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G17 Rev. Date 2009-11-18 Rev. NC9014-AS01 4/7 SAW Bandpass Filter F2G17 Input / Output VSWR Charts Input / Output Smith Charts I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G17 Rev. Date 2009-11-18 Rev. NC9014-AS01 5/7 SAW Bandpass Filter F2G17 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F2G17 Rev. Date 2009-11-18 Rev. NC9014-AS01 6/7 SAW Bandpass Filter F2G17 Carrier Tape Dimensions [unit : mm] Top Cover Tape I A I A Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G17 Rev. Date 2009-11-18 Rev. NC9014-AS01 7/7