ETC FWJ-20A14F

Bussmann
®
Ferrule
20-30A
FWJ 1000V
Electrical Characteristics
I2t (A2S)
Rated
Current
Clearing
RMS-Amps
Pre-arc
at 1000V
Size
20
25
25
33
30
52
Interrupting rating 200kA RMS Symmetrical.
Watts loss provided at rated current.
800 Vdc U.L. Recognized.
See accessories on page 90.
14 ≈ 67mm
(·Ω¡§∑)
n
n
n
n
®
Ordering Information
Watts
Loss
Part
Number
Carton
Qty.
Carton
Weight
(kg)
9
11
14
FWJ-20A14F
FWJ-25A14F
FWJ-30A14F
10
0.300
220
350
450
Dimensions
Curves
Figure
Number
See Page
or
(BIF #)
Fig. 1
page 96
(35785315)
1 kg = 2.2 lbs.
1 lb = 0.45 kg
Dimensions
Fig. 1: 20-30 Amp Range
66.7
(2.626")
14.5
(0.571")
15.9
(0.625")
Dimension in mm.
1mm = 0.0394∑
1∑ = 25.4mm
Electrical Characteristics
Total Clearing I2t
The total clearing I2t at rated voltage and
at power factor of 15% are given in the
electrical characteristics. For other voltages, the clearing I2t is found by multiplying by correction factor, K , given as
a function of applied working voltage,
E g , (RMS).
Arc Voltage
This curve gives the peak arc voltage,
U L , which may appear across the fuse
during its operation as a function of the
applied working voltage, E g , (RMS) at a
power factor of 15%.
1.5
2000
K
1.0
Kp
0.8
UL
1.0
Power Losses
Watts loss at rated current is given in
the electrical characteristics. The curve
allows the calculation of the power
losses at load currents lower than the
rated current . The correction factor, K p ,
is given as a function of the RMS load
current, Ib , in % of the rated current .
1600
0.6
0.5
1200
0.4
0.5
0.3
800
0.3
0.2
0.2
400
Eg
Eg
0.15
680
800
1000
200
600
1000 1400 1800
0.1
30 40 50
Ib
60
70
80 90 100%
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled.
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right,
without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without
notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
12-28-98
SB98107
Rev. A
Form No. FWJ 1000
Page 1 of 1
BIF Doc #720028