MEANWELL GS18E05-P1J

GS18E
10~18W AC-DC Single Output Wall-mounted type
series
Features :
Universal AC input / Full range
No load power consumption<0.5W
Pass energy star(CEC) level
for 5~48V output
Meet EISA 2007 (Energy Independence and Security Act) for 5 ~ 48V
2 pole EURO plug
Class
power (without earth pin)
Full output 3~48V safety approval
Protections: Short circuit / Over load / Over voltage
Fully enclosed plastic case
LED indicator for power on
Approvals: TUV / CB / CE
Pass LPS for 9~48V output
2 years warranty
TUV
Rheinland
Product Safety
SPECIFICATION
ORDER NO.
GS18E03-P1J GS18E05-P1J GS18E07-P1J GS18E09-P1J GS18E12-P1J GS18E15-P1J GS18E18-P1J GS18E24-P1J GS18E28-P1J GS18E48-P1J
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
GS18E03
Note.2 3.3V
GS18E05
GS18E07
GS18E09
GS18E12
GS18E15
GS18E18
GS18E24
GS18E28
5V
7.5V
9V
12V
15V
18V
24V
28V
GS18E48
48V
0.64A
0.375A
0 ~ 0.375A
RATED CURRENT
3.0A
3.0A
2.0A
2.0A
1.50A
1.20A
1.0A
0.75A
CURRENT RANGE
0 ~ 3.0A
0 ~ 3.0A
0 ~ 2.0A
0 ~2.0A
0 ~ 1.50A
0 ~ 1.20A
0 ~ 1.0A
0 ~ 0.75A
0 ~ 0.64A
RATED POWER (max.)
10W
15W
15W
18W
18W
18W
18W
18W
18W
18W
50mVp-p
80mVp-p
80mVp-p
80mVp-p
100mVp-p
150mVp-p
180mVp-p
240mVp-p
240mVp-p
VOLTAGE TOLERANCE Note.4 5.0%
RIPPLE & NOISE (max.) Note.3 50mVp-p
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
LINE REGULATION
Note.5
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
Note.6
5.0%
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC
90 ~ 264VAC 135 ~ 370VDC
VOLTAGE RANGE
INPUT
geprUfre
Sicherheit
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
68%
AC CURRENT
INRUSH CURRENT (max.)
0.5A / 100VAC
LEAKAGE CURRENT(max.)
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
73%
79%
500ms, 20ms, 15ms/115VAC at full load
79%
81%
81%
82%
84%
84%
85%
45A / 230VAC
0.25mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
Protection type : Clamp by zener diode, output short
0 ~ +50 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
TUV EN60950-1 approved
I/P-O/P:4242VDC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
SAFETY &
ISOLATION RESISTANCE
EMC
EMI CONDUCTION & RADIATION Compliance to EN55022 class B
(Note. 7)
HARMONIC CURRENT
Compliance to EN61000-3-2,3
OTHERS
CONNECTOR
NOTE
EMS IMMUNITY
MTBF
DIMENSION
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
PACKING
PLUG
500Khrs min. MIL-HDBK-217F(25 )
79*54*33mm (L*W*H)
210g ; 60pcs / 13.5kg / CARTON
Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, centre positive for stock ; Other type available by customer requested
CABLE
Standard type UL1185 6ft (4FT for 3.3 ~ 5V output) for stock ; Other type available by customer requested
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:GS18E-SPEC 2008-05-08
GS18E
10~18W AC-DC Single Output Wall-mounted type
Mechanical Specification
series
Unit:mm
38
UL1185 16AWG 1230 50mm for 3.3~5V
UL1185 18AWG 1830 50mm for 7.5~48V
70 10mm
POWER LED
C"+"
11 0.5mm
ID 2.1 x OD 5.5
NAME PLATE
Plug Assignment
33
79
Standard plug: P1J (option)
54
P1J
OUTPUT
+
Static Characteristics
Derating Curve
100
100
LOAD (%)
LOAD (%)
P/N
CENTER
70
0
10
20
30
Ta (
40
)
50
80
60
0
50
60
70
80
90 100
260
INPUT VOLTAGE
File Name:GS18E-SPEC 2008-05-08