AGILENT HDSP-313G

Agilent HDSP-311x/313x
10.16 mm (0.4 inch) Single Digit General
Purpose Seven Segment Display
Data Sheet
Applications
• Suitable for indoor use
Description
This 10.16 mm (0.4 inch) LED
single digit seven segment display
uses industry standard size package
and pinout. The device is available
in either common anode or common
cathode. The choice of colors
includes High Efficiency Red
(HER), Green, AlGaAs Red, and
Yellow. The gray face displays are
suitable for indoor use.
• Not recommended for industrial
application, i.e., operating
temperature requirements
exceeding +85˚C or below –25˚C[1]
Features
• Industry standard size
• Industry standard pinout
10.16 mm (0.4 inch) character height
DIP lead on 2.54 mm
• Choice of colors
High Efficiency Red (HER), Green,
AlGaAs Red, and Yellow
• Extreme temperature cycling not
recommended
Note:
1. For additional details, please contact your
local Agilent sales office or an authorized
distributor.
• Excellent appearance
Evenly lighted segments gray
package gives optimum contrast
± 50 ft. viewing angle
• Design flexibility
Common anode right hand
decimal point or common cathode
right hand decimal point
• Categorized for luminous
intensity
Green and yellow categorized for
color
Devices
HER
HDSP-311E
Green
HDSP-311G
AlGaAs Red
HDSP-311A
Yellow
HDSP-311Y
HDSP-313E
HDSP-313G
HDSP-313A
HDSP-313Y
Description
Common Anode Right
Hand Decimal
Common Cathode Right
Hand Decimal
Package Drawing
A
B
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options [1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color [1]
A: AlGaAs Red
E: High Efficiency Red
G: Green
Y: Yellow
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
Refer to Respective Datasheet
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest
Agilent representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1
bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
2
Package Dimensions
Package Drawing A
TOP END VIEW
FRONT VIEW
COUNTRY
OF ORIGIN
8°
PIN 1
5.51
(0.220)
COLOR
BINNING
(NOTE 3)
0.50
(0.020)
18.75
(0.738)
HDSP-XXXX
YWW XZ COO
+
10.16
(0.400)
1.20
(0.047)
∅1.4
(0.55)
2.54 x 6
(0.100)
LUMINOUS
INTENSITY
CATEGORY
4.10
(0.161)
DATE CODE
5.54
(0.218)
SIDE VIEW
9.80
(0.386)
A
0.60
(0.020)
F
G
E
5.10
(0.201)
B
C
D
DP
0.30
(0.012)
7.62
(0.300)
NOTE: NO PINS 4, 5, 6, AND 12
DIMENSIONS IN MILLIMETERS (INCHES)
3
Package Dimensions
Package Drawing B
FRONT VIEW
RIGHT SIDE
COUNTRY
OF ORIGIN
6.00
(0.236)
LUMINOUS
INTENSITY
CATEGORY
10.00°
COLOR BIN
2.54 ± 0.38
(0.100)
10.00
(0.394)
1.85
(0.073)
∅1.20
(0.047)
HDSP-XXXX
YWW XZ COO
0.90
(0.035)
12.80 ± 0.25
(0.504)
4 x 2.54
(0.400)
0.50 ± 0.05
(0.02)
6.40 ± 0.25
(0.252)
7.00 ± 0.25
(0.276)
TOP SIDE
DATE
CODE
10.40 MIN.
(0.409)
9.70 ± 0.25
(0.382)
A
3.90
(0.153)
F
G
E
B
C
D
DP
0.30 ± 0.05
(0.012)
7.62 ± 0.38
(0.300)
4
DIMENSIONS IN MILLIMETERS (INCHES)
Internal Circuit Diagram
COMMON ANODE RIGHT HAND DECIMAL
HDSP-311E/311G/311Y/311A
3.14 COM
A
1
B
13
C
10
D
8
E
7
F
2
G
11
DP
9
PIN No.
CONNECTION
1
CATHODE A
2
CATHODE F
3
COMMON ANODE
7
CATHODE E
8
CATHODE D
9
CATHODE DP
10
CATHODE C
11
CATHODE G
13
CATHODE B
14
COMMON ANODE
PINS 4, 5, 6, 12: NO PIN
COMMON CATHODE RIGHT HAND DECIMAL
HDSP-313E/313G/313Y/313A
3.8 COM
A
10
5
B
9
C
7
D
5
E
4
F
2
G
1
DP
6
PIN NO.
CONNECTION
1
ANODE G
2
ANODE F
3
COMMON CATHODE
4
ANODE E
5
ANODE D
6
ANODE DP
7
ANODE C
8
COMMON CATHODE
9
ANODE B
10
ANODE A
Absolute Maximum Ratings at TA = 25˚C
Description
Power Dissipation Segment
Forward Current Segment
Peak Forward Current per Segment
(1/10 Duty Factor at 10 KHz)
Operating Temperature Range
Storage Temperature Range
Reverse Voltage per Segment or DP
Wavesoldering Temperature for 3 seconds
(at 2 mm Distance from the body)
HER
HDSP-31xE
65
25[1]
100
Green
HDSP-31xG
65
25[2]
100
AlGaAs Red
HDSP-31xA
30
15[3]
80
Yellow
HDSP-31xY
52
20[4]
80
Units
mW
mA
mA
–35 to +85
–35 to +85
5
250
–35 to +85
–35 to +85
5
250
–35 to +85
–35 to +85
5
250
–35 to +85
–35 to +85
5
250
˚C
˚C
V
˚C
Notes:
1. Derate above 25˚C at 0.33 mA/˚C.
2. Derate above 25˚C at 0.33 mA/˚C.
3. Derate above 25˚C at 0.2 mA/˚C.
4. Derate above 25˚C at 0.27 mA/˚C.
Electrical/Optical Characteristics at TA = 25˚C
High Efficiency Red (HER)
Devices
HDSP-
Parameter
Luminous Intensity/Segment
Symbol
IV
Forward Voltage
Peak Wavelength
Dominant Wavelength
Reverse Voltage
VF
λPEAK
λd
VR
Parameter
Luminous Intensity/Segment
Forward Voltage
Symbol
IV
VF
Min.
1.25
311E
313E
Typ.
1.49
3.20
2.05
635
620
Max.
2.40
5
Units
mcd
mcd
V
nm
nm
V
Test Conditions
IF = 5 mA
IF = 10 mA
IF = 20 mA
IR = 100 µA
Green
Devices
HDSP-
311G
313G
6
Min.
1.25
1.80
Peak Wavelength
Dominant Wavelength
Reverse Voltage
λPEAK
λd
VR
5
Typ.
3.20
2.06
2.25
568
573
Max.
2.60
Units
mcd
V
V
nm
nm
V
Test Conditions
IF = 10 mA
IF = 10 mA
IF = 20 mA
IR = 100 µA
AlGaAs Red
Devices
HDSP-
Parameter
Luminous Intensity/Segment
Symbol
IV
Forward Voltage
VF
Peak Wavelength
Dominant Wavelength
Reverse Voltage
λPEAK
λd
VR
Parameter
Luminous Intensity/Segment
Symbol
IV
Min.
3.20
311A
313A
Typ.
4.54
7.50
1.85
Max.
2.00
660
643
5
Units
mcd
mcd
V
Test Conditions
IF = 5 mA
IF = 10 mA
IF = 20 mA
nm
nm
V
IR = 100 µA
Yellow
Devices
HDSP-
Min.
0.80
311Y
313Y
Forward Voltage
Peak Wavelength
Dominant Wavelength
Reverse Voltage
VF
λPEAK
λd
VR
Typ.
0.86
1.50
2.15
595
590
Max.
2.60
5
Intensity Bin Limits (mcd at 10 mA)
Bin
Name
G
H
I
J
K
L
HER/Green
Min.[1]
NA
1.251
2.001
3.201
NA
NA
Yellow
Min.[1]
0.801
1.251
2.001
NA
NA
NA
Max.[1]
NA
2.000
3.200
5.050
NA
NA
Max.[1]
1.250
2.000
3.200
NA
NA
NA
AlGaAs Red
Min.[1]
Max.[1]
NA
NA
NA
NA
NA
NA
3.201
5.050
5.051
8.000
8.001
12.650
Note:
1. Tolerance for each bin limit is ± 10%.
Color Bin Limits (nm at 10 mA)
Color
Green
Yellow
Bin
3
4
5
1
2
3
Dominant Wavelength (nm)
Min.[1]
Max.[1]
569.1
571.0
571.1
573.0
573.1
575.0
585.5
588.5
588.5
591.5
591.5
594.5
Note:
1. Tolerance for each bin limit is 1 nm.
7
Units
mcd
mcd
V
nm
nm
V
Test Conditions
IF = 5 mA
IF = 10 mA
IF = 20 mA
IR = 100 µA
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
High Efficiency Red (HER)
30
HIGH EFFICIENCY RED (HER)
25
20
15
10
5
0
0
20
40
60
80
100
120
100
80
60
40
20
0
0
0.5
Figure 1. Maximum allowable average or DC
current vs. ambient temperature.
2.5
3.0
3.5
1.4
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 10 mA)
2.0
Figure 2. Forward current vs. forward voltage.
2.5
2.0
1.5
1.0
0.5
0
5
10
15
20
25
30
Figure 3. Relative luminous intensity vs. DC
forward current.
1.2
1.0
0.8
0.6
0.4
0.2
0
35
IF – FORWARD CURRENT FOR SEGMENT – mA
8
1.5
VF – FORWARD VOLTAGE – V
TA – AMBIENT TEMPERATURE – °C
0
1.0
0
5
10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 4. Relative efficiency (luminous
intensity per unit current) vs. peak current.
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
Green
30
GAP GREEN
25
20
15
10
5
0
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE – °C
120
100
80
60
40
20
1.0
1.5
2.0
2.5
3.0
3.5
1.2
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZEDTO 1 AT 10 mA)
0.5
Figure 6. Forward current vs. forward
voltage.
3.0
2.5
2.0
1.5
1.0
0.5
0
5
10
15
20
25
30
35
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 7. Relative luminous intensity vs. DC
forward current.
9
0
VF – FORWARD VOLTAGE – V
Figure 5. Maximum allowable average or DC
current vs. ambient temperature.
0
0
1.0
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 8. Relative efficiency (luminous
intensity per unit current) vs. peak current.
16
AIGaAs RED
14
12
10
8
6
4
2
0
0
20
40
60
80
100
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
AlGaAs Red
120
100
80
60
40
20
0
0
0.5
Figure 9. Maximum allowable average or DC
current vs. ambient temperature.
2.5
1.2
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 10 mA)
2.0
Figure 10. Forward current vs. forward voltage.
3.0
2.5
2.0
1.5
1.0
0.5
0
5
10
15
20
25
30
35
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 11. Relative luminous intensity vs. DC
forward current.
10
1.5
VF – FORWARD VOLTAGE – V
TA – AMBIENT TEMPERATURE – °C
0
1.0
1.0
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 12. Relative efficiency (luminous
intensity per unit current) vs. peak current.
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
Yellow
25
YELLOW
20
15
10
5
0
0
20
40
60
80
100
120
100
80
60
40
20
0
0
0.5
Figure 13. Maximum allowable average or
DC current vs. ambient temperature.
2.0
2.5
3.0
3.5
Figure 14. Forward current vs. forward voltage.
1.4
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
3.5
RELATIVE LUMINOUS INTENSITY
(NORMALIZEDTO 1 AT 10 mA)
1.5
VF – FORWARD VOLTAGE – V
TA – AMBIENT TEMPERATURE – °C
3.0
2.5
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
30
35
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 15. Relative luminous intensity vs. DC
forward current.
11
1.0
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5
10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 16. Relative efficiency (luminous
intensity per unit current) vs. peak current.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/
International), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
June 30, 2004
5988-2969EN