HITTITE HMC368LP4

HMC368LP4 / 368LP4E
v03.0705
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT
FREQUENCY MULTIPLIERS - SMT
6
Typical Applications
Features
• Microwave Radios & VSAT
Output Power: +15 dBm
• Fiber Optic Infrastructure
Wide Input Power Range: 0 to +10 dBm
• Military Communications & Radar
100 kHz SSB Phase Noise: -140 dBc/Hz
+5V @ 75 mA Supply
16 mm2 Leadless QFN SMT Package
Functional Diagram
General Description
The HMC368LP4 & HMC368LP4E are miniature ampdoubler-amps utilizing GaAs PHEMT technology in 4
mm x 4 mm leadless surface mount packages. When
driven by a +2 dBm signal, the multiplier provides
+15 dBm typical output power from 9 to 16 GHz. The
Fo and the 3Fo isolations are 18 dB typical. The low
additive SSB phase noise of -140 dBc/Hz at 100 kHz
offset helps the user maintain good system noise
performance. The HMC368LP4 & HMC368LP4E are
ideal for use in LO multiplier chains allowing reduced
parts count vs. traditional approaches.
Electrical Specifications, TA = +25° C, Vd1 = Vd2 = +5.0 Vdc, +2 dBm Drive Level
Parameter
Min.
Frequency Range, Input
Typ.
Max.
4.5 - 8.0
Frequency Range, Output
Output Power
12
Fo Isolation (with respect to output level)
GHz
9.0 - 16.0
GHz
15
dBm
18
dB
3Fo Isolation (with respect to output level)
18
dB
Input Return Loss
10
dB
Output Return Loss
SSB Phase Noise (Fout = 13 GHz, 100 kHz Offset)
Supply Current (Idd)*
Pin = +2 dBm
10
dB
-140
dBc/Hz
75
mA
*Adjust Vg1, Vg2 between -2V to 0V to achieve Idd = 75 mA typical
6 - 34
Units
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC368LP4 / 368LP4E
v03.0705
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT
Output Power vs. Drive Level
20
20
18
18
16
16
14
12
10
8
6
+25C
+85C
-40C
4
2
6
14
12
10
8
0 dBm
+2 dBm
+5 dBm
+10 dBm
6
4
2
0
0
8
9
10
11
12
13
14
15
16
17
8
9
10
OUTPUT FREQUENCY (GHz)
20
18
15
16
10
14
12
10
8
4.5V
5.0V
5.5V
4
2
13
14
15
16
17
16
17
5
0
-5
-10
-15
Fo
2Fo
3Fo
-20
-25
0
-30
8
9
10
11
12
13
14
15
16
17
8
9
10
OUTPUT FREQUENCY (GHz)
11
12
13
14
15
OUTPUT FREQUENCY (GHz)
Output Return Loss vs. Temperature
Input Return Loss vs. Temperature
0
0
+25 C
+85 C
-40 C
-5
OUTPUT RETURN LOSS (dB)
INPUT RETURN LOSS (dB)
12
Isolation @ +2 dBm Drive Level
20
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
Output Power vs.
Supply Voltage @ +2 dBm Drive Level
6
11
OUTPUT FREQUENCY (GHz)
FREQUENCY MULTIPLIERS - SMT
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
Output Power vs.
Temperature @ +2 dBm Drive Level
-10
-15
-20
-25
-5
-10
-15
-20
+25 C
+85 C
-40 C
-25
-30
-30
4
5
6
7
FREQUENCY (GHz)
8
9
8
9
10
11
12
13
14
15
16
17
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 35
HMC368LP4 / 368LP4E
v03.0705
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT
Output Spectrum @ Fin = 6.5 GHz,
Pin = +2 dBm
20
20
10
15
OUTPUT POWER (dBm)
0
-10
-20
-30
-40
10
5
9GHz
12GHz
16GHz
0
-5
-50
-10
4
6
8
10
12
14
16
18
20
22
24
26
28
-5 -4 -3 -2 -1
0
FREQUENCY (GHz)
1
2
3
4
5
6
7
INPUT POWER (dBm)
SSB Phase Noise
Performance, Fout = 13 GHz,
Input Power = +2 dBm
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
-120
-130
-140
-150
-160
-170
2
10
SSB PHASE NOISE (dBc/Hz)
OUTPUT POWER (dB)
FREQUENCY MULTIPLIERS - SMT
6
Output Power vs. Input Power
@ Three Frequencies
3
10
4
10
5
10
6
10
7
10
OFFSET FREQUENCY (Hz)
6 - 36
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8
9 10
HMC368LP4 / 368LP4E
v03.0705
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT
Typical Supply Current vs. Vdd
RF Input (Vdd = +5V)
+20 dBm
Supply Voltage, Vd1, Vd2
+6.0V
Vdd (V)
Idd (mA)
4.5
73
Gate Bias Voltage (Vg1, Vg2)
-4 to 0 Vdc
5.0
75
Channel Temperature
150 °C
5.5
77
Continuous Pdiss (T = 85 °C)
(derate 12.5 mW/°C above 85 °C)
812 mW
Thermal Resistance
(junction to ground paddle)
80 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Note: Amp-Doubler-Amp will operate over full voltage
range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
6
FREQUENCY MULTIPLIERS - SMT
Absolute Maximum Ratings
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC368LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC368LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H368
XXXX
[2]
H368
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 37
HMC368LP4 / 368LP4E
v03.0705
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT
Pin Description
FREQUENCY MULTIPLIERS - SMT
6
6 - 38
Pin Number
Function
Description
1, 5-14,
18, 19, 24
N/C
No Connection. These pins may be connected to RF
ground. Performance will not be affected.
3
RFIN
Multiplier Input. AC Coupled.
No external DC blocks required.
2, 4, 15, 17
GND
All ground leads and ground paddle must be soldered
to PCB RF/DC ground.
16
RFOUT
Multiplied Output. AC coupled.
No external DC blocks necessary.
20, 22
Vd2, Vd1
Drain supply voltage 5V ± 0.5V.
21, 23
Vg2, Vg1
Gate supply voltages.
Adjust between -2 Vdc to 0 Vdc
to achieve 75 mA drain current.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC368LP4 / 368LP4E
v03.0705
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT
Evaluation PCB
FREQUENCY MULTIPLIERS - SMT
6
List of Materials for Evaluation PCB 107846
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J7
DC Pin
C1 - C4
100 pF capacitor, 0402 Pkg.
C5 - C8
2.2 μF capacitor, case size A
U1
HMC368LP4 / HMC368LP4E Amp-x2-Amp
PCB [2]
107844 PCB
[1]
The circuit board used in the final application should
be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed
paddle should be connected directly to the ground
plane similar to that shown. The evaluation circuit
board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 39