HITTITE HMC565LC5

HMC565LC5
v02.0209
LOW NOISE AMPLIFIERS - SMT
8
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
Typical Applications
Features
The HMC565LC5 is ideal for use as a LNA or driver
amplifier for:
Noise Figure: 2.5 dB
• Point-to-Point Radios
OIP3: 20 dBm
• Point-to-Multi-Point Radios & VSAT
Single Supply: +3V @ 53 mA
• Test Equipment and Sensors
50 Ohm Matched Input/Output
• Military & Space
RoHS Compliant 5 x 5 mm Package
Functional Diagram
General Description
Gain: 21 dB
The HMC565LC5 is a high dynamic range GaAs
PHEMT MMIC Low Noise Amplifier housed in a
leadless RoHS compliant 5x5mm SMT package.
Operating from 6 to 20 GHz, the HMC565LC5
features 21 dB of small signal gain, 2.5 dB noise
figure and IP3 of +20 dBm across the operating
band. This self-biased LNA is ideal for microwave
radios due to its single +3V supply operation, and DC
blocked RF I/O’s.
Electrical Specifi cations, TA = +25° C, Vdd 1, 2, 3 = +3V
Parameter
Min.
Frequency Range
Gain
19
Gain Variation Over Temperature
Max.
Min.
Typ.
Max.
12 - 20
21
16
Units
GHz
18.5
dB
0.025
0.035
0.025
0.035
dB/ °C
Noise Figure
2.5
2.8
2.5
3
dB
Input Return Loss
15
12
Output Return Loss
13
15
dB
11
dBm
13
dBm
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
8 - 178
Typ.
6 - 12
8
10
9
11
Output Third Order Intercept (IP3)
20
Total Supply Current (Idd)(Vdd = +3V)
53
dB
21
75
53
dBm
75
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
mA
HMC565LC5
v02.0209
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
30
20
25
10
20
S21
S11
S22
0
15
-10
10
-20
5
+25C
+85C
-40C
0
0
5
10
15
20
25
30
5
7
9
FREQUENCY (GHz)
Input Return Loss vs. Temperature
13
15
17
19
21
Output Return Loss vs. Temperature
0
0
+25C
+85C
-40C
+25C
+85C
-40C
-5
RETURN LOSS (dB)
-5
RETURN LOSS (dB)
11
FREQUENCY (GHz)
-10
-15
-20
-10
-15
LOW NOISE AMPLIFIERS - SMT
30
-30
-20
-25
-25
5
7
9
11
13
15
17
19
21
5
7
9
FREQUENCY (GHz)
13
15
17
19
21
17
19
21
Output IP3 vs. Temperature
10
30
8
25
IP3 (dBm)
+25C
+85C
-40C
6
11
FREQUENCY (GHz)
Noise Figure vs. Temperature
NOISE FIGURE (dB)
8
Gain vs. Temperature
GAIN (dB)
RESPONSE (dB)
Broadband Gain & Return Loss
4
2
20
15
+25C
+85C
-40C
10
0
5
5
7
9
11
13
15
FREQUENCY (GHz)
17
19
21
5
7
9
11
13
15
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 179
HMC565LC5
v02.0209
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
Psat vs. Temperature
20
20
16
16
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature
12
8
+25C
+85C
-40C
4
12
8
+25C
+85C
-40C
4
0
0
5
7
9
11
13
15
17
19
21
5
7
9
11
FREQUENCY (GHz)
13
15
17
21
Power Compression @ 12 GHz
25
Pout (dBm), GAIN (dB), PAE(%)
0
-10
+25C
+85C
-40C
-20
-30
-40
-50
-60
5
7
9
11
13
15
17
19
20
Pout
Gain
PAE
15
10
5
0
-5
-20
21
-15
FREQUENCY (GHz)
-10
INPUT POWER (dBm)
Gain, Noise Figure & Power vs.
Supply Voltage @ 12 GHz
10
25
8
20
Gain
7
P1dB
15
6
5
4
10
3
5
Noise Figure
2
NOISE FIGURE (dB)
GAIN (dB), P1dB (dBm)
9
1
0
0
2.5
3
3.5
Vdd (Vdc)
8 - 180
19
FREQUENCY (GHz)
Reverse Isolation vs. Temperature
ISOLATION (dB)
LOW NOISE AMPLIFIERS - SMT
8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
-5
HMC565LC5
v02.0209
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
Drain Bias Voltage (Vdd1, Vdd2, Vdd3)
+3.5 Vdc
RF Input Power (RFIN)(Vdd = +3.0 Vdc)
0 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 8.5 mW/°C above 85 °C)
0.753 W
Thermal Resistance
(channel to ground paddle)
119.5 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Typical Supply Current vs. Vdd
Vdd (Vdc)
Idd (mA)
+2.5
51
+3.0
53
+3.5
56
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
8
LOW NOISE AMPLIFIERS - SMT
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKEL
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 181
HMC565LC5
v02.0209
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
LOW NOISE AMPLIFIERS - SMT
8
8 - 182
Pin Descriptions
Pin Number
Function
Description
1, 2, 6 - 19,
23 - 25, 27,
29, 31, 32
N/C
This pin may be connected to RF/DC ground.
Performance will not be affected.
3, 5, 20, 22
GND
These pins and package bottom must be
connected to RF/DC ground.
4
RFIN
This pin is AC coupled
and matched to 50 Ohms.
21
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
30, 28, 26
Vdd1, 2, 3
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF and 2.2 μF are required.
Interface Schematic
Application Circuit
Component
Value
C1, C2, C3
100 pF
C4, C5, C6
2.2 μF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC565LC5
v02.0209
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 6 - 20 GHz
8
LOW NOISE AMPLIFIERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 110431 [1]
Item
Description
J1 - J2
PCB Mount K Connector
J3
2 mm DC Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4 - C6
2.2 μF Capacitor, Tantalum
U1
HMC565LC5 Amplifier
PCB [2]
109001 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 183