HRS HRFC-A2

FC Type Fiber Optic Connectors
MU
HRFC Series
SC
FC
Harsh
Environment
■Features
1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products.
JIC C 5970 (F01 type fiber optic connectors).
IEC 61754-13
Attenuators
2. Two types of plug frames
Conventional cutout key ring types and molded key ring types are available.
Important Notice
Plug key width : 2.1mm
Adapter key width : 2.2mm
Terminators
■Applications
Public communications lines, CATV, Test equipment, etc.
47
■Product Specifications
MU
Ratings
Operating temperature range
Insertion Loss
Return Loss
Test Method (IEC 61300)
Attenuators
Specifications
0.5dB max. (PC, AdPC, APC)
(GI)
Wavelength 1310nm (LED)
0.3dB max. (PC)
(SM)
(GI)
Wavelength 1310nm (LD)
22dB min.(PC) 40dB min.(AdPC) 60dB min. (APC)
22dB min. (PC)
Ferrule withdrawal
Extract Zirconia gauge 2.499 ±0.0005 mm
dia from split sleeve.
Copper alloy split sleeve
Zirconia split sleeve
Cable retention
(Straight pull)
98N tensile load for minute.
1) Insertion loss fluctuation after test: 0.2dB max.
2) No visible damage, dislocation of clamp or cable.
Durability
(cycles, mating/un-mating)
1000 times
Vibration
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
Shock
Acceleration of 981 m/s2, 6 ms duration,
sin half-wave waveform, 10 cycles in each of the 3 axis.
Humidity
(Temperature/ humidity- cycles)
-10°C to 65°C, humidity: 90% to 96% 20 cycles
Change of temperature
-40°C to +70°C 42 cycles
(Complies with Telcordia standard GR-326-CORE)
Dry heat
960 hours at 85°C
Cold
960 hours at -25°C
Salt mist
48 hours in a 5% concentration of salt mist
Part
Terminators
-25°C to +70°C
Wavelength 1310nm (LD)
■Materials
48
Storage temperature range
(SM)
Harsh
Environment
Environmental
Characteristics
FC
SC
Mechanical Characteristics
Optical
Characteristics
Item
-25°C to +70°C
Material
Plug housing
Brass, Stainless steel or Zinc alloy
Spring
Stainless steel
Ferrule
Zirconia
Adapter
Brass
Split sleeve
Copper alloy
Receptacle
Brass
Attenuator housing
Stainless steel
2N to 5.9N
2N to 3.9N
1) Insertion loss fluctuation after test: 0.2dB max.
2) No visible damage, cracks or part dislocation.
No significant corrosion.
■FC products
Key width 2.1mm
Cutout keying ring type
For 3 mm cable,
Molded keying ring type
Cutout keying ring type
For 0.9 mm fiber,
Molded keying ring type
Cutout keying ring type
SC
For 2 mm cable,
Molded keying ring type
MU
Plug Housing
Single mode
Ferrule
Multi mode
FC
Adapter
Standard type
Solid Body type
Key width 2.2mm
HRFC-type
Connector
Round type
FC to SC
Harsh
Environment
Conversion adapter
Flange type
FC to SC
Receptacle
Attenuators
Dust cap
Fixed type
Attenuator
Single mode
GI
Terminators
Variable type
Single mode
Terminator
49
■Molded keying ring type (Key width 2.1mm)
●For 2mm cable
Ø10
SC
M8∞0.75
MU
52.8
Part Number
CL No.
Boot color
HRFC-P8-H2(21)
701-0075-3-21
Blue
PC
HRFC-P8-L2(21)
701-0077-9-21
Light purple
AdPC
HRFC-P8-G2(21)
701-2001-8-21
Green
APC
●For 3mm cable
M8∞0.75
52.8
Ø10
FC
Polishing type
Part Number
CL No.
Boot color
Polishing type
HRFC-P8-H3(21)
701-0074-0-21
Blue
PC
HRFC-P8-L3(21)
701-0078-1-21
Light purple
AdPC
HRFC-P8-G3(21)
701-2002-0-21
Green
APC
●For 0.9mm fiber
Ø10
Attenuators
M8∞0.75
Harsh
Environment
30.8
Part Number
CL No.
Boot color
Polishing type
HRFC-P15-H(21)
701-0114-3-21
Blue
PC
HRFC-P15-L(21)
701-0115-6-21
Light purple
AdPC
HRFC-P15-G(21)
701-2004-6-21
Green
APC
■Tool
Terminators
●Crimp tool
Part Number
CL No.
Applicable connector
HSC-T3
704-0287-0
HRFC-P8-H2,L2,G2,
HRFC-P8-H3,L3,G3,
<Locations>
(1)2mm Jacket crimping: section A
3mm Jacket crimping: section C
(2)KevlarTM crimping: section B
50
■Cutout keying ring type (Key width 2.1mm)
MU
●For 2mm cable
Ø10
M8∞0.75
37.8
CL No.
701-0001-7-04
SC
Part Number
HRFC-P1-H(04)
●For 3mm cable
Ø10
FC
M8∞0.75
37.8
Part Number
CLNo.
HRFC-P1-H
701-0001-7
Harsh
Environment
●For 0.9mm fiber
M8∞0.75
Ø10
27.8
CL No.
HRFC-P6-H
701-0041-1
Attenuators
Part Number
Terminators
51
■Adapters (Key width 2.2mm)
●Solid Body type
15
4
MU
M8∞0.75
15
9.5
M8∞0.75
BPanel Cutout
Ø9
or 2-Ø2.4
SC
+0.2
0
1.5
s
ter
.2
Ø2 Coun
4
Ø
●Standard Body type
2-M2∞0.4
9.5
15
FC-A
th
ep
d
ink
+0.5
0
13.4±0.1
Board thiekness : 16mm
Part Number
CL No.
Split sleeve
HRFC-PA11-G1
701-0071-2
Copper alloy
HRFC-PA11-D1
701-0106-5
Zirconia
Remarks
(Note)
Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to
the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged.
15
15
4
9.5
BPanel Cutout
Ø9+0.5
0
2--M8∞0.75
2--M2∞0.4
or 2--Ø2.4 +0.2
0
FC
FC-A
Ø2.2
Ø4 Countersink depth 1.5
Part Number
CL No
13.4±0.1
Mark Split sleeve
HRFC-PA1-G1(02)
701-0014-9-02
FC-AP Copper alloy
HRFC-PA1-D1(02)
701-0089-8-02
FC-AA
Zirconia
Board thiekness : 16mm
Remarks
(Note)
Harsh
Environment
Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to
the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged.
●Flange type
BPanel Cutout
15
2
Ø9 +0.5
0
2--M8∞0.75
Ø19
13.45
2--M2∞0.4
or 2--Ø2.4 +0.2
0
Attenuators
2- Ø2.2
2--Ø4 Countersink depth 1.5
●Round type
13.4±0.1
Part Number
CL No.
Split sleeve
HRFC-PA4-G1
701-0068-8
Copper alloy
HRFC-PA4-D1
701-0112-8
Zirconia
Remarks
(Note)
Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to
the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged.
15
Ø8
Terminators
2−M8×0.75
Part Number
CL No.
Split sleeve
HRFC-A2-SF(01)
701-0039-0-01
Copper alloy
HRFC-A2-SF-D1
-----
Zirconia
Remarks
(Note)
Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to
the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged.
52
■Conversion adapters
●FC / SC
BPanel Cutout
21.2
5.5 3.5 12.2
15
Ø9+0.5
0
MU
2--M2∞0.4
or 2--Ø2.4 +0.2
0
12.8
Ø19
2--M8∞0.75
13.4±0.1
9
13.4
Board thiekness : 16mm
Part Number
CL No.
Split sleeve
HSCJ-HRFCJ-B(51)
704-0021-3-51
Copper alloy
SC
7.4
Ø19
9.15
15
●FC / SC
13.7
(3.9)
9
12.8
32
CL No.
701-0065-0-51
Split sleeve
Polishing type Fiber type
HRFCP-HSCJ-1AS(51)
701-0108-0-51
HRFCP-HSCJ-2(51)
701-0085-7-51
PC
HRFCP-HSCJ-2AS(51)
701-0109-3-51
AdPC
PC
Copper alloy
FC
Part Number
HRFCP-HSCJ-1(51)
GI-50/125
AdPC
SM-9.5/125
●FC / SC
Harsh
Environment
9
12.8
M8∞0.75
7.4
9.4
21
27.9
(1.8)
Part Number
Split sleeve
704-0203-0-51
HSCP-HRFCJ-1AS(51)
704-0288-3-51
HSCP-HRFCJ-2(51)
704-0204-3-51
HSCP-HRFCJ-2AS(51)
704-0289-6-51
3
PC
Copper alloy
5.5
GI-50/125
AdPC
PC
SM-9.5/125
AdPC
BPanel Cutout
M15
9
Polishing type Fiber type
Attenuators
■Receptacle
CL No.
HSCP-HRFCJ-1(51)
M9.5
Ø9 +0.5
0
Terminators
4--M2∞0.4
or 4--Ø2.4 +0.2
0
M8∞0.75
FC-A
4- Ø2.2
Ø4 Countersink depth 1.5
9.5±0.1
Part Number
HRS No.
Remarks
HRFC-R1
701-0016-4
MM
HRFC-R2
701-0023-0
SM
53
■Ferrule
Same as SC ferrules
MU
Refer to page 33 for details.
Terminators
Attenuators
Harsh
Environment
FC
SC
■Dust Cap
54
Part Number
CL No.
HRFC-C1
701-0019-2