IHB100TC 100 Watt Triple Output Half Brick DC/DC Converter OBSOLETE PRODUCT Contact factory for replacement model RoHS Compliant 33 - 75V Input Range Each Channel Independently Current Limited High Efficiency: 88% Typical 1500VDC Isolation Between Input and Output ISO9001 CERTIFIED Operation to 100oC Baseplate Temperature 50MS Transient Recovery, 0-90% Load Step Primary & Secondary Remote On/Off IHB100TC Series Approved to UL/CUL 1950, EN60950 The IHB100TC series triple output standard half brick modules are designed for today’s demanding industrial applications. Available in two wide range inputs, these isolated converters offer many features in the standard models. With a complement of safety agency approvals and low noise operations, the converters respond extremely fast to change in load conditions. Inherent in the design are very well-controlled output voltage and minimal need for minimum loading on main (V1) output. PRODUCT SELECTION CHART MODEL INPUT VOLTAGE (VDC) V1 (±) IHB100T480312C IHB100T480315C IHB100T480512C IHB100T480515C 48 (33-75) 48 (33-75) 48 (33-75) 48 (33-75) 3.3 3.3 5.1 5.0 ABSOLUTE MAXIMUM RATINGS RATED VOUT (VDC) V2 (±) V3 (±) 12 15 12 15 12 15 12 15 V1(±) 30 30 20 20 EFFICIENCY vs TEMPERATURE Storage Temperature +125°C Input to Output Isolation 1500 VDC Change in Efficiency (%) +100°C 4.2 3.4 4.2 3.4 TCASE = +40°C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified.* Output Short-Circuit Duration Continuous Baseplate Temperature RATED MAXIMUM I OUT (A) V2(±) V3(±) Case Temperature (°C) 4.2 3.4 4.2 3.4 SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. INPUT PARAMETER Voltage Range Reflected Ripple Current Input Ripple Rejection Maximum Input Current No Load Power Dissipation Inrush Charge Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled GENERAL PARAMETER ISOLATION Input to Each Output Input to Baseplate Channel to Channel Resistance, Input - Output Capacitance, Input - Output Leakage Current GENERAL Set Point Accuracy Turn-on Time Remote On/Off Control Inputs Primary Sink Current-Logic Low Vlow Vhigh Secondary Sink Current-Logic Low Vlow Vhigh External Synchronization Input Frequency Pulse Width Source Impedence Input High Voltage Input Low Voltage Input Impedance Switching Frequency Weight TEMPERATURE Operation/Specification Storage Shutdown Thermal Inpedance PARAMETER IHB100T480312C OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency CONDITIONS Peak - Peak DC to 1KHz Output Power = 100W VIN = 30V POUT = 0, VIN, Min<VIN<VIN, Max MIN TYP MAX UNITS 33 48 75 370 50 60 VDC mA dB 5 6 0.247 A W mC 7.5 15 10 20 mA mA TYP MAX CONDITIONS MIN Peak Test 1500 1500 500 10 Any Channel to Any Channel VISO = 240VAC, 60Hz 2000 180 VIN = Nominal, 50% Load Within 1% of Nominal VOUT 3.5 UNITS VDC VDC VDC M7 pF MA, rms Open Collector/Drain VIN = VMAX 1 5 % mSec 7 0.8 Open Collector mA V 100 0.4 Open Collector MA V 520 320 47 5 1 KHz nSec 7 V V 7 KHz oz (g) Open Collector/Drain 440 150 4 0 470 480 470 490 3 (85) Case Temperature -40 -55 +100 Case to Ambient CONDITIONS 8.2 V1 Min Total Combined O/P Power = 100 Watts Max IO Nom 0.5 DC to 20MHz* Nom Max 50 3.3 15 100 100 VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load Min Max 25 12.2 2.1 150 50 .02 0.05 0.50 0.10 1.0 2.0 1.00 See Regulation Curves 38 30 38 0 V2 Nom 30.0 200 3.80 .05 3.15 * oC °C °C °C/W +100 +125 +115 .02 6.0 5.0 Min 4.2 0 500 Dependent on V1 .05 6.0 V3 Nom Max 25 12.2 2.1 150 50 4.2 500 .02 .05 1.0 2.0 W V A mV V %/°C % % See Regulation Curves 6.0 5.0 A A 6.0 50 to 100% Load Step 150 35 VOUT, 1% of VOUT, Nom IOUT1=15A, (IOUT2+IOUT3)= 4.2A F.L. VIN=Nominal 4.2 85 250 50 5.0 mV MSec V % 86 * See Application Notes available on the web at www.murata-ps.com IHB100TC REV A (RoHS) 05/2006 2 SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. IHB100T480315C OUTPUT PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency PARAMETER IHB100T480512C OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency PARAMETER IHB100T480515C OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency CONDITIONS V1 Min Total Combined O/P Power = 100 Watts Maximum IO Nom 0.5 DC to 20MHz* * Nom Max 50 3.3 15 100 100 3.15 .02 VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 30.0 200 3.80 .05 0.05 0.50 38 30 0.10 1.0 150 35 250 50 5.0 38 Min 0 V2 Nom Max 25 15.85 1.66 125 50 .02 Min 3.33 0 500 Dependent on V1 .05 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 Nom Max 25 15.85 1.66 125 50 3.33 500 .02 .05 V3 U V3 U V3 U W V A mV V %/°C 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 % % A A 50 to 100% Load Step VOUT, 1% of VOUT, Nom IOUT1=15A, (IOUT2+IOUT3) = 3.4A F.L. VIN=Nominal CONDITIONS 4.2 85 86 Min Nom Max 50 100 0.5 5.1 10 100 V1 Total Combined O/P Power = 100 Watts Combined IO Nom DC to 20MHz* * mV MSec V % 4.75 .02 VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 20 150 5.50 .05 Min Nom 25 0 12 2.1 150 .02 Min 50 4.2 0 500 Dependent on V1 .05 2.0 Nom Max 25 50 12 2.1 150 4.2 500 .02 .05 1.0 2.0 W V A mV V %/°C 0.05 0.50 26.0 20.0 0.10 1.0 200 300 mV 35 50 7.0 MSec V % 26.0 1.0 V2 Max See Regulation Curves 6.0 5.0 6.0 % % A A See Regulation Curves 6.0 5.0 6.0 50 to 100% Load Step VOUT, 1% of VOUT, Nom IOUT1=10A, (IOUT2+IOUT3) = 4.2A F.L. VIN=Nominal CONDITIONS 6.0 86 87 Min Nom Max 50 5.0 100 10 100 20 150 5.50 .05 V1 Total Combined O/P Power = 100 Watts Max IO Nom 0.5 DC to 20MHz* * 4.60 .02 VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load Min 0 V2 Nom Max 25 15.3 50 1.66 125 .02 Min Nom Max 25 15.3 50 W V 3.33 500 A mV V %/°C 3.33 0 1.66 500 125 Dependent on V1 .05 .02 .05 0.05 0.05 26.0 20.0 1.0 1.0 1.0 2.0 See Regulation Curves 1.0 2.0 See Regulation Curves 26.0 5.0 4.0 5.0 4.0 200 300 mV 35 50 7.0 MSec V % 5.0 % % A A 5.0 50 to 100% Load Step VOUT, 1% of VOUT, Nom IOUT1=10A, (IOUT2+IOUT3) = 4.2A F.L. VIN=Nominal 6.0 86 87 * See Application Notes available on the web at www.murata-ps.com IHB100TC REV A (RoHS) 05/2006 3 MECHANICAL SIDE VIEW PIN SIDE DOWN PIN CONNECTIONS 1 2 3 4 5 6 7 8 9 10 11 12 PIN SIDE UP PRIMARY ON/OFF -VIN +VIN SYNC IN -V2 +V2 TRIM +V1 -V1 SECONDARY ON/OFF +V3 -V3 NOTES: All dimensions are in inches (millimeters). PIN PLACEMENT TOLERANCE: ± 0.005" MECHANICAL TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability. THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 USA: Mansfield (MA), Tel: (508) 339 3000, email: [email protected] Canada: Toronto, Tel: (866) 740 1232, email: [email protected] UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] www.murata-ps.com email: [email protected] ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. IHB100TC Singapore: Parkway Centre, Tel: +65 6348 9096, email: [email protected] REV A (RoHS) 05/2006 4