TI LM4132CMFX-3.0

LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
LM4132 SOT-23 Precision Low Dropout Voltage Reference
Check for Samples: LM4132
FEATURES
DESCRIPTION
•
•
•
•
•
•
The LM4132 family of precision voltage references
performs comparable to the best laser-trimmed
bipolar references, but in cost effective CMOS
technology. The key to this break through is the use
of EEPROM registers for correction of curvature,
tempco, and accuracy on a CMOS bandgap
architecture that allows package level programming
to overcome assembly shift. The shifts in voltage
accuracy and tempco during assembly of die into
plastic packages limit the accuracy of references
trimmed with laser techniques.
1
2
•
•
•
•
Output Initial Voltage Accuracy 0.05%
Low Temperature Coefficient 10ppm/°C
Low Supply Current, 60µA
Enable Pin Allowing a 3µA Shutdown Mode
20mA Output Current
Voltage Options 1.8V, 2.048V, 2.5V, 3.0V, 3.3V,
4.096V
Custom Voltage Options Available (1.8V to
4.096V)
VIN Range of VREF + 400mV to 5.5V @ 10mA
Stable with Low ESR Ceramic Capacitors
SOT23-5 Package
Unlike other LDO references, the LM4132 is capable
of delivering up to 20mA and does not require an
output capacitor or buffer amplifier. These
advantages and the SOT23 packaging are important
for space-critical applications.
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
Series references provide lower power consumption
than shunt references, since they do not have to idle
the maximum possible load current under no load
conditions. This advantage, the low quiescent current
(60µA), and the low dropout voltage (400mV) make
the LM4132 ideal for battery-powered solutions.
Instrumentation & Process Control
Test Equipment
Data Acquisition Systems
Base Stations
Servo Systems
Portable, Battery Powered Equipment
Automotive & Industrial
Precision Regulators
Battery Chargers
Communications
Medical Equipment
The LM4132 is available in five grades (A, B, C, D
and E) for greater flexibility. The best grade devices
(A) have an initial accuracy of 0.05% with a specified
temperature coefficient of 10ppm/°C or less, while the
lowest grade parts (E) have an initial accuracy of
0.5% and a tempco of 30ppm/°C.
Typical Application Circuit
Input
5V
VIN
CIN*
LM4132
Enable
Output
2.5V
VREF
*
COUT
EN
GND
*Note: The capacitor CIN is required and the capacitor COUT is optional.
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Connection Diagram
N/C 1
5 VREF
GND 2
EN 3
4 VIN
(Top View)
See Package Number DBV0005A
PIN DESCRIPTIONS
Pin #
Name
Function
1
N/C
No connect pin, leave floating
2
GND
Ground
3
EN
Enable pin
4
VIN
Input supply
5
VREF
Reference output
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings (1) (2)
Maximum Voltage on any input
-0.3 to 6V
Output short circuit duration
Indefinite
Power Dissipation (TA = 25°C) (3)
350mW
−65°C to 150°C
Storage Temperature Range
Lead Temperature (soldering, 10sec)
260°C
Vapor Phase (60 sec)
215°C
Infrared (15sec)
220°C
ESD Susceptibility
(1)
(2)
(3)
(4)
(4)
Human Body Model
2kV
Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for
which the device is intended to be functional. For specifications, see Electrical Characteristics.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
Without PCB copper enhancements. The maximum power dissipation must be de-rated at elevated temperatures and is limited by TJMAX
(maximum junction temperature), θJ-A (junction to ambient thermal resistance) and TA (ambient temperature). The maximum power
dissipation at any temperature is: PDissMAX = (TJMAX - TA) /θJ-A up to the value listed in the Absolute Maximum Ratings. θJ-A for SOT23-5
is 220°C/W, TJMAX = 125°C.
The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin.
Operating Ratings
Maximum Input Supply Voltage
5.5V
Maximum Enable Input Voltage
VIN
Maximum Load Current
20mA
−40°C to +125°C
Junction Temperature Range (TJ)
2
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
Electrical Characteristics
LM4132-1.8 (VOUT = 1.8V)
Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of 40°C to +125°C unless otherwise specified. Minimum and Maximum limits are specified through test, design, or statistical
correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes
only. Unless otherwise specified VIN = 5V and ILOAD = 0
Symbol
VREF
TCVREF / °C
(Note 6)
Parameter
Conditions
Min
(1)
Typ
(2)
LM4132A-1.8
(A Grade - 0.05%)
-0.05
0.05
LM4132B-1.8
(B Grade - 0.1%)
-0.1
0.1
LM4132C-1.8
(C Grade - 0.2%)
-0.2
0.2
LM4132D-1.8
(D Grade - 0.4%)
-0.4
0.4
LM4132E-1.8
(E Grade - 0.5%)
-0.5
0.5
LM4132A-1.8
0°C ≤ TJ ≤ + 85°C
10
-40°C ≤ TJ ≤ +125°C
20
20
20
-40°C ≤ TJ ≤ +125°C
LM4132D-1.8
60
100
EN = 0V
3
7
ΔVREF/ΔVIN
Line Regulation
VREF + 400mV ≤ VIN ≤ 5.5V
30
ΔVREF/ΔILOAD
Load Regulation
0mA ≤ ILOAD ≤ 20mA
25
Long Term Stability (3)
1000 Hrs
50
Thermal Hysteresis (4)
-40°C ≤ TJ ≤ +125°C
75
Dropout Voltage (5)
ILOAD = 10mA
230
0.1 Hz to 10 Hz
170
VIN - VREF
(2)
(3)
(4)
(5)
ppm / °C
30
Supply Current in Shutdown
ΔVREF
%
20
LM4132E-1.8
IQ_SD
Unit
Temperature Coefficient
LM4132C-1.8
(1)
(1)
Output Voltage Initial Accuracy
LM4132B-1.8
IQ
Max
Supply Current
µA
µA
ppm / V
120
ppm / mA
ppm
400
mV
VN
Output Noise Voltage
ISC
Short Circuit Current
75
mA
VIL
Enable Pin Maximum Low Input Level
35
%VIN
VIH
Enable Pin Minimum High Input Level
65
µVPP
%VIN
Limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation using
Statistical Quality Control.
Typical numbers are at 25°C and represent the most likely parametric norm.
Long term stability is VREF @25°C measured during 1000 hrs.
Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).
Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value
measured with a 5V input.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
3
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Electrical Characteristics
LM4132-2.0 (VOUT = 2.048V)
Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of 40°C to +125°C unless otherwise specified. Minimum and Maximum limits are specified through test, design, or statistical
correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes
only. Unless otherwise specified VIN = 5V and ILOAD = 0
Symbol
VREF
TCVREF / °C
(Note 6)
Parameter
Conditions
Min
(1)
Typ
(2)
LM4132A-2.0
(A Grade - 0.05%)
-0.05
0.05
LM4132B-2.0
(B Grade - 0.1%)
-0.1
0.1
LM4132C-2.0
(C Grade - 0.2%)
-0.2
0.2
LM4132D-2.0
(D Grade - 0.4%)
-0.4
0.4
LM4132E-2.0
(E Grade - 0.5%)
-0.5
0.5
LM4132A-2.0
0°C ≤ TJ ≤ + 85°C
10
-40°C ≤ TJ ≤ +125°C
20
20
20
-40°C ≤ TJ ≤ +125°C
LM4132D-2.0
60
100
EN = 0V
3
7
ΔVREF/ΔVIN
Line Regulation
VREF + 400mV ≤ VIN ≤ 5.5V
30
ΔVREF/ΔILOAD
Load Regulation
0mA ≤ ILOAD ≤ 20mA
25
Long Term Stability (3)
1000 Hrs
50
Thermal Hysteresis (4)
-40°C ≤ TJ ≤ +125°C
75
Dropout Voltage (5)
ILOAD = 10mA
175
0.1 Hz to 10 Hz
190
VIN - VREF
(2)
(3)
(4)
(5)
4
ppm / °C
30
Supply Current in Shutdown
ΔVREF
%
20
LM4132E-2.0
IQ_SD
Unit
Temperature Coefficient
LM4132C-2.0
(1)
(1)
Output Voltage Initial Accuracy
LM4132B-2.0
IQ
Max
Supply Current
µA
µA
ppm / V
120
ppm / mA
ppm
400
mV
VN
Output Noise Voltage
ISC
Short Circuit Current
75
mA
VIL
Enable Pin Maximum Low Input Level
35
%VIN
VIH
Enable Pin Minimum High Input Level
65
µVPP
%VIN
Limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation using
Statistical Quality Control.
Typical numbers are at 25°C and represent the most likely parametric norm.
Long term stability is VREF @25°C measured during 1000 hrs.
Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).
Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value
measured with a 5V input.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
Electrical Characteristics
LM4132-2.5 (VOUT = 2.5V)
Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of 40°C to +125°C unless otherwise specified. Minimum and Maximum limits are specified through test, design, or statistical
correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes
only. Unless otherwise specified VIN = 5V and ILOAD = 0
Symbol
VREF
TCVREF / °C
(Note 6)
Parameter
Conditions
Min
Typ
(1)
(2)
LM4132A-2.5
(A Grade - 0.05%)
-0.05
0.05
LM4132B-2.5
(B Grade - 0.1%)
-0.1
0.1
LM4132C-2.5
(C Grade - 0.2%)
-0.2
0.2
LM4132D-2.5
(D Grade - 0.4%)
-0.4
0.4
LM4132E-2.5
(E Grade - 0.5%)
-0.5
0.5
LM4132A-2.5
0°C ≤ TJ ≤ + 85°C
10
-40°C ≤ TJ ≤ +125°C
20
20
20
-40°C ≤ TJ ≤ +125°C
LM4132D-2.5
60
100
EN = 0V
3
7
ΔVREF/ΔVIN
Line Regulation
VREF + 400mV ≤ VIN ≤ 5.5V
50
ΔVREF/ΔILOAD
Load Regulation
0mA ≤ ILOAD ≤ 20mA
25
Long Term Stability (3)
1000 Hrs
50
Thermal Hysteresis (4)
-40°C ≤ TJ ≤ +125°C
75
Dropout Voltage (5)
ILOAD = 10mA
175
0.1 Hz to 10 Hz
240
VIN - VREF
(2)
(3)
(4)
(5)
ppm / °C
30
Supply Current in Shutdown
ΔVREF
%
20
LM4132E-2.5
IQ_SD
Unit
Temperature Coefficient
LM4132C-2.5
(1)
(1)
Output Voltage Initial Accuracy
LM4132B-2.5
IQ
Max
Supply Current
µA
µA
ppm / V
120
ppm / mA
ppm
400
mV
VN
Output Noise Voltage
ISC
Short Circuit Current
75
mA
VIL
Enable Pin Maximum Low Input Level
35
%VIN
VIH
Enable Pin Minimum High Input Level
65
µVPP
%VIN
Limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation using
Statistical Quality Control.
Typical numbers are at 25°C and represent the most likely parametric norm.
Long term stability is VREF @25°C measured during 1000 hrs.
Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).
Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value
measured with a 5V input.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
5
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Electrical Characteristics
LM4132-3.0 (VOUT = 3.0V)
Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of 40°C to +125°C unless otherwise specified. Minimum and Maximum limits are specified through test, design, or statistical
correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes
only. Unless otherwise specified VIN = 5V and ILOAD = 0
Symbol
VREF
TCVREF / °C
(Note 6)
Parameter
Conditions
Min
(1)
Typ
(2)
LM4132A-3.0
(A Grade - 0.05%)
-0.05
0.05
LM4132B-3.0
(B Grade - 0.1%)
-0.1
0.1
LM4132C-3.0
(C Grade - 0.2%)
-0.2
0.2
LM4132D-3.0
(D Grade - 0.4%)
-0.4
0.4
LM4132E-3.0
(E Grade - 0.5%)
-0.5
0.5
LM4132A-3.0
0°C ≤ TJ ≤ + 85°C
10
-40°C ≤ TJ ≤ +125°C
20
20
20
-40°C ≤ TJ ≤ +125°C
LM4132D-3.0
60
100
EN = 0V
3
7
ΔVREF/ΔVIN
Line Regulation
VREF + 400mV ≤ VIN ≤ 5.5V
70
ΔVREF/ΔILOAD
Load Regulation
0mA ≤ ILOAD ≤ 20mA
25
Long Term Stability (3)
1000 Hrs
50
Thermal Hysteresis (4)
-40°C ≤ TJ ≤ +125°C
75
Dropout Voltage (5)
ILOAD = 10mA
175
0.1 Hz to 10 Hz
285
VIN - VREF
(2)
(3)
(4)
(5)
6
ppm / °C
30
Supply Current in Shutdown
ΔVREF
%
20
LM4132E-3.0
IQ_SD
Unit
Temperature Coefficient
LM4132C-3.0
(1)
(1)
Output Voltage Initial Accuracy
LM4132B-3.0
IQ
Max
Supply Current
µA
µA
ppm / V
120
ppm / mA
ppm
400
mV
VN
Output Noise Voltage
ISC
Short Circuit Current
75
mA
VIL
Enable Pin Maximum Low Input Level
35
%VIN
VIH
Enable Pin Minimum High Input Level
65
µVPP
%VIN
Limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation using
Statistical Quality Control.
Typical numbers are at 25°C and represent the most likely parametric norm.
Long term stability is VREF @25°C measured during 1000 hrs.
Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).
Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value
measured with a 5V input.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
Electrical Characteristics
LM4132-3.3 (VOUT = 3.3V)
Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of 40°C to +125°C unless otherwise specified. Minimum and Maximum limits are specified through test, design, or statistical
correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes
only. Unless otherwise specified VIN = 5V and ILOAD = 0
Symbol
VREF
TCVREF / °C
(Note 6)
Parameter
Conditions
Min
(1)
Typ
(2)
LM4132A-3.3
(A Grade - 0.05%)
-0.05
0.05
LM4132B-3.3
(B Grade - 0.1%)
-0.1
0.1
LM4132C-3.3
(C Grade - 0.2%)
-0.2
0.2
LM4132D-3.3
(D Grade - 0.4%)
-0.4
0.4
LM4132E-3.3
(E Grade - 0.5%)
-0.5
0.5
LM4132A-3.3
0°C ≤ TJ ≤ + 85°C
10
-40°C ≤ TJ ≤ +125°C
20
20
20
-40°C ≤ TJ ≤ +125°C
LM4132D-3.3
60
100
EN = 0V
3
7
ΔVREF/ΔVIN
Line Regulation
VREF + 400mV ≤ VIN ≤ 5.5V
85
ΔVREF/ΔILOAD
Load Regulation
0mA ≤ ILOAD ≤ 20mA
25
Long Term Stability (3)
1000 Hrs
50
Thermal Hysteresis (4)
-40°C ≤ TJ ≤ +125°C
75
Dropout Voltage (5)
ILOAD = 10mA
175
0.1 Hz to 10 Hz
310
VIN - VREF
(2)
(3)
(4)
(5)
ppm / °C
30
Supply Current in Shutdown
ΔVREF
%
20
LM4132E-3.3
IQ_SD
Unit
Temperature Coefficient
LM4132C-3.3
(1)
(1)
Output Voltage Initial Accuracy
LM4132B-3.3
IQ
Max
Supply Current
µA
µA
ppm / V
120
ppm / mA
ppm
400
mV
VN
Output Noise Voltage
ISC
Short Circuit Current
75
mA
VIL
Enable Pin Maximum Low Input Level
35
%VIN
VIH
Enable Pin Minimum High Input Level
65
µVPP
%VIN
Limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation using
Statistical Quality Control.
Typical numbers are at 25°C and represent the most likely parametric norm.
Long term stability is VREF @25°C measured during 1000 hrs.
Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).
Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value
measured with a 5V input.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
7
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Electrical Characteristics
LM4132-4.1 (VOUT = 4.096V)
Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of 40°C to +125°C unless otherwise specified. Minimum and Maximum limits are specified through test, design, or statistical
correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes
only. Unless otherwise specified VIN = 5V and ILOAD = 0
Symbol
VREF
TCVREF / °C
(Note 6)
Parameter
Conditions
Min
(1)
Typ
(2)
LM4132A-4.1
(A Grade - 0.05%)
-0.05
0.05
LM4132B-4.1
(B Grade - 0.1%)
-0.1
0.1
LM4132C-4.1
(C Grade - 0.2%)
-0.2
0.2
LM4132D-4.1
(D Grade - 0.4%)
-0.4
0.4
LM4132E-4.1
(E Grade - 0.5%)
-0.5
0.5
LM4132A-4.1
0°C ≤ TJ ≤ + 85°C
10
-40°C ≤ TJ ≤ +125°C
20
20
20
-40°C ≤ TJ ≤ +125°C
LM4132D-4.1
(1)
(2)
(3)
(4)
(5)
8
ppm / °C
30
Supply Current
60
100
3
7
Supply Current in Shutdown
EN = 0V
ΔVREF/ΔVIN
Line Regulation
VREF + 400mV ≤ VIN ≤ 5.5V
100
ΔVREF/ΔILOAD
Load Regulation
0mA ≤ ILOAD ≤ 20mA
25
Long Term Stability (3)
1000 Hrs
50
Thermal Hysteresis (4)
-40°C ≤ TJ ≤ +125°C
75
Dropout Voltage (5)
ILOAD = 10mA
175
0.1 Hz to 10 Hz
350
VIN - VREF
%
20
LM4132E-4.1
ΔVREF
Unit
Temperature Coefficient
LM4132C-4.1
IQ
(1)
Output Voltage Initial Accuracy
LM4132B-4.1
IQ_SD
Max
µA
µA
ppm / V
120
ppm / mA
ppm
400
mV
VN
Output Noise Voltage
ISC
Short Circuit Current
75
mA
VIL
Enable Pin Maximum Low Input Level
35
%VIN
VIH
Enable Pin Minimum High Input Level
65
µVPP
%VIN
Limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation using
Statistical Quality Control.
Typical numbers are at 25°C and represent the most likely parametric norm.
Long term stability is VREF @25°C measured during 1000 hrs.
Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).
Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value
measured with a 5V input.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
Typical Performance Characteristics for 1.8V
Output Voltage
vs
Temperature
Load Regulation
1.804
1.8010
1.803
OUTPUT VOLTAGE (V)
1.8005
OUTPUT VOLTAGE (V)
1.802
5 TYPICAL UNITS
1.801
1.800
1.799
1.798
1.8000
1.7995
25oC
1.7990
-40oC
1.7985
1.797
1.796
-40
125oC
-20
0
20
40
60
80 100 120
1.7980
0
TEMPERATURE (oC)
2
4
6
8
10 12 14 16 18 20
LOAD CURRENT (mA)
Figure 1.
Figure 2.
Line Regulation
0.1-10Hz Noise
1.8020
OUTPUT VOLTAGE (V)
1.8015
1.8010
125oC
1.8005
25oC
1.8000
1.7995
-40oC
1.7990
1.7985
1.7990
2.2
2.7
3.2
3.7
4.2
4.7
5.2
INPUT VOLTAGE (V)
Figure 3.
Figure 4.
Output Voltage Noise Spectrum
Power Supply Rejection
vs
Frequency
0
POWER SUPPLY REJECTION (dB)
OUTPUT NOISE VOLTAGE (PV/rt(Hz))
16
14
NO COUT
12
10
8
6
4
2
0
10
100
1k
10k
-10
NO COUT
-20
-30
-40
-50
-60
-70
COUT = 0.1 PF
-80
-90
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 5.
Figure 6.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
9
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Typical Performance Characteristics for 2.048V
Output Voltage
vs
Temperature
Load Regulation
2.050
2.052
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
2.051
2.050
5 TYPICAL UNITS
2.049
2.048
2.047
2.049
2.048
25oC
-40oC
2.047
125oC
2.046
2.046
2.045
-50
-25
0
25
50
75
100
2.045
0
125
4
8
12
16
20
LOAD CURRENT (mA)
TEMPERATURE (oC)
Figure 7.
Figure 8.
Line Regulation
0.1 - 10 Hz Noise
2.052
OUTPUT VOLTAGE (V)
2.051
125oC
2.050
25oC
2.049
2.048
-40oC
2.047
2.046
2.5
3.0
3.5
4.0
4.5
5.0
5.5
INPUT VOLTAGE (V)
Figure 9.
Figure 10.
Output Voltage Noise Spectrum
Power Supply Rejection
vs
Frequency
0
POWER SUPPLY REJECTION (dB)
OUTPUT NOISE VOLTAGE (PV/rt(Hz))
16
14
NO COUT
12
10
8
6
4
2
0
10
-20
-30
NO COUT
-40
-50
-60
-70
COUT = 0.1 PF
-80
100
1k
10k
FREQUENCY (Hz)
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
Figure 11.
10
-10
Figure 12.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
Typical Performance Characteristics for 2.5V
Output Voltage
vs
Temperature
Load Regulation
2.504
2.503
5 TYPICAL UNITS
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
2.503
2.502
2.501
2.500
2.499
2.502
-40oC
2.501
2.500
125oC
2.499
2.498
2.497
-50
25oC
-25
0
25
50
75
100
2.498
0
125
4
o
8
12
16
TEMPERATURE ( C)
LOAD CURRENT (mA)
Figure 13.
Figure 14.
Line Regulation
0.1 - 10 Hz Noise
20
2.502
OUTPUT VOLTAGE (V)
125oC
2.501
2.500
25oC
-40oC
2.499
2.498
2.497
3.0
3.5
4.0
4.5
5.0
5.5
INPUT VOLTAGE (V)
Figure 15.
Figure 16.
Output Voltage Noise Spectrum
Power Supply Rejection
vs
Frequency
0
POWER SUPPLY REJECTION (dB)
OUTPUT NOISE VOLTAGE (PV/rt(Hz))
32
28
NO COUT
24
20
16
12
8
4
0
-10
NO COUT
-20
-30
-40
-50
-60
COUT = 0.1 PF
-70
-80
10
100
1k
10k
FREQUENCY (Hz)
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
Figure 17.
Figure 18.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
11
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Typical Performance Characteristics for 3.0V
Output Voltage
vs
Temperature
Load Regulation
3.006
3.0020
3.005
3.0015
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
3.004
3.003
3.002
5 TYPICAL UNITS
3.001
3
2.999
3.0010
3.0005
125oC
3.0000
2.9995
25oC
2.9990
2.998
2.9985
2.997
2.9980
2.996
-40
-20
0
20
40
60
-40oC
2.9975
80 100 120
0
2
o
TEMPERATURE ( C)
4
6
8
10 12 14 16 18 20
LOAD CURRENT (mA)
Figure 19.
Figure 20.
Line Regulation
0.1-10 Hz Noise
3.0020
OUTPUT VOLTAGE (V)
3.0015
125oC
3.0010
3.0005
25oC
3.0000
2.9995
2.9990
-40oC
2.9985
2.9980
3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
INPUT VOLTAGE (V)
Figure 21.
Figure 22.
Output Voltage Noise Spectrum
Power Supply Rejection
vs
Frequency
0
POWER SUPPLY REJECTION (dB)
OUTPUT NOISE VOLTAGE PV (Hz))
30
25
NO COUT
20
15
10
5
0
10
100
1k
NO COUT
-20
-30
-40
-50
-60
-70
COUT = 0.1 PF
-80
10
10k
FREQUENCY (Hz)
100
1k
10k
100k
1M
FREQUENCY (Hz)
Figure 23.
12
-10
Figure 24.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
Typical Performance Characteristics for 3.3V
Output Voltage
vs
Temperature
Load Regulation
3.305
3.3005
3.304
3.3000
5 TYPICAL UNITS
3.302
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
3.303
3.301
3.3
3.299
3.298
3.297
3.2990
25oC
3.2985
125oC
3.2980
3.296
3.295
-40
-40oC
3.2995
-20
0
20
40
60
80 100 120
3.2975
0
TEMPERATURE (oC)
2
4
6
8
10 12 14 16 18 20
LOAD CURRENT (mA)
Figure 25.
Figure 26.
Line Regulation
0.1-10 Hz Noise
3.3010
OUTPUT VOLTAGE (V)
3.3008
25oC
3.3006
3.3004
3.3002
125oC
3.3000
-40oC
3.2998
3.2996
3.5 3.7 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5
INPUT VOLTAGE (V)
Figure 27.
Figure 28.
Output Voltage Noise Spectrum
Power Supply Rejection
vs
Frequency
0
POWER SUPPLY REJECTION (dB)
OUTPUT NOISE VOLTAGE PV (Hz))
30
25
NO COUT
20
15
10
5
0
10
100
1k
-10
-30
-40
-50
COUT = 0.1 PF
-60
-70
-80
-90
10
10k
NO COUT
-20
100
1k
10k
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 29.
Figure 30.
100k
1M
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
13
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Typical Performance Characteristics for 4.096V
Output Voltage
vs
Temperature
Load Regulation
4.104
4.098
-40oC
5 TYPICAL UNITS
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
4.102
4.100
4.098
4.096
4.094
4.097
4.096
125oC
4.095
25oC
4.094
4.092
4.090
-50
-25
0
25
50
75
100
4.093
0
125
4
8
12
16
TEMPERATURE ( C)
LOAD CURRENT (mA)
Figure 31.
Figure 32.
Line Regulation
0.1 - 10 Hz Noise
o
20
4.100
OUTPUT VOLTAGE (V)
4.099
4.098
125oC
4.097
4.096
4.095
-40oC
4.094
25oC
4.093
4.092
4.5
4.7
4.9
5.1
5.3
5.5
INPUT VOLTAGE (V)
Figure 33.
Figure 34.
Output Voltage Noise Spectrum
Power Supply Rejection
vs
Frequency
POWER SUPPLY REJECTION RATIO (dB)
OUTPUT NOISE VOLTAGE (PV/rt(Hz))
32
28
NO COUT
24
20
16
12
8
4
0
10
100
1k
10k
FREQUENCY (Hz)
-10
NO COUT
-20
-30
-40
-50
-60
COUT = 0.1 PF
-70
-80
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
Figure 35.
14
0
Figure 36.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
Typical Performance Characteristics
Dropout
vs
Load to 0.5% Accuracy
Supply Current
vs
Input Voltage
100
450
VREF = 2.048V
400
VDROPOUT (mV)
SUPPLY CURRENT (PA)
2.048V
350
300
250
200
150
2.5V
100
4.096V
50
0
2
7
12
17
80
125oC
60
25oC
40
-40oC
20
0
0.5
22
1.5
ILOAD (mA)
2.5
3.5
4.5
INPUT VOLTAGE (V)
Figure 37.
Figure 38.
Enable Threshold Voltage and Hysteresis
Shutdown IQ
vs
Temperature
5.0
2.5
4.5
VEN (V)
IQ SHUTDOWN (PA)
3
VIL
2
1.5
VIH
1
4.0
3.5
3.0
2.5
0.5
2.0
0
2
2.5
3
3.5
4
4.5
5
-40
50
75
Typical Long Term Stability
Ground Current
vs
Load Current
100
125
85
1 TYPICAL UNIT FROM EACH
VOLTAGE OPTION
80
GROUND CURRENT (PA)
DRIFT (ppm)
25
Figure 40.
100
50
150
-50
-100
75
70
65
60
-150
-200
0
Figure 39.
200
0
-25
TEMPERATURE (oC)
VIN (V)
150
5.5
0 100 200 300 400 500 600 700 800 900 1000
TIME (Hours)
55
0
5
10
15
20
LOAD CURRENT (mA)
Figure 41.
Figure 42.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
15
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Typical Performance Characteristics (continued)
Typical Thermal Hysteresis
Turn-On Transient Response
45
Temperature Range
-40oC < TJ < 125oC
after 8 thermal cycles
40
FREQUENCY
35
30
25
20
15
10
5
0
0
25
50
75 100 125 150 200
HYSTERESIS (ppm)
16
Figure 43.
Figure 44.
Load Transient Response
ILOAD = 0 to 10mA
Line Transient Response
VIN = 4V to 5.5V
Figure 45.
Figure 46.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
APPLICATION INFORMATION
THEORY OF OPERATION
The foundation of any voltage reference is the band-gap circuit. While the reference in the LM4132 is developed
from the gate-source voltage of transistors in the IC, principles of the band-gap circuit are easily understood
using a bipolar example. For a detailed analysis of the bipolar band-gap circuit, please refer to Application Note
AN-56.
SUPPLY AND ENABLE VOLTAGES
To ensure proper operation, VEN and VIN must be within a specified range. An acceptable range of input voltages
is:
VIN > VREF + 400mV (ILOAD ≤ 10mA)
(1)
The enable pin uses an internal pull-up current source (IPULL_UP ≊ 2µA) that may be left floating or triggered by an
external source. If the part is not enabled by an external source, it may be connected to VIN. An acceptable range
of enable voltages is given by the enable transfer characteristics. See the Electrical Characteristics section and
Enable Transfer Characteristics figure for more detail. Note, the part will not operate correctly for VEN > VIN.
COMPONENT SELECTION
A small ceramic (X5R or X7R) capacitor on the input must be used to ensure stable operation. The value of CIN
must be sized according to the output capacitor value. The value of CIN must satisfy the relationship CIN ≥ COUT.
When no output capacitor is used, CIN must have a minimum value of 0.1µF. Noise on the power-supply input
may affect the output noise. Larger input capacitor values (typically 4.7µF to 22µF) may help reduce noise on the
output and significantly reduce overshoot during startup. Use of an additional optional bypass capacitor between
the input and ground may help further reduce noise on the output. With an input capacitor, the LM4132 will drive
any combination of resistance and capacitance up to VREF/20mA and 10µF respectively.
The LM4132 is designed to operate with or without an output capacitor and is stable with capacitive loads up to
10µF. Connecting a capacitor between the output and ground will significantly improve the load transient
response when switching from a light load to a heavy load. The output capacitor should not be made arbitrarily
large because it will effect the turn-on time as well as line and load transients.
While a variety of capacitor chemistry types may be used, it is typically advisable to use low esr ceramic
capacitors. Such capacitors provide a low impedance to high frequency signals, effectively bypassing them to
ground. Bypass capacitors should be mounted close to the part. Mounting bypass capacitors close to the part will
help reduce the parasitic trace components thereby improving performance.
SHORT CIRCUITED OUTPUT
The LM4132 features indefinite short circuit protection. This protection limits the output current to 75mA when the
output is shorted to ground.
TURN ON TIME
Turn on time is defined as the time taken for the output voltage to rise to 90% of the preset value. The turn on
time depends on the load. The turn on time is typically 33.2µs when driving a 1µF load and 78.8µs when driving
a 10µF load. Some users may experience an extended turn on time (up to 10ms) under brown out conditions
and low temperatures (-40°C).
THERMAL HYSTERESIS
Thermal hysteresis is defined as the change in output voltage at 25ºC after some deviation from 25ºC. This is to
say that thermal hysteresis is the difference in output voltage between two points in a given temperature profile.
An illustrative temperature profile is shown in Figure 47.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
17
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
125oC
VREF1
25oC
Time
VREF2
-40oC
Figure 47. Illustrative Temperature Profile
This may be expressed analytically as the following:
VHYS =
lVREF1 - VREF2l
x 106 ppm
VREF
Where
•
•
•
•
•
VHYS = Thermal hysteresis expressed in ppm
VREF = Nominal preset output voltage
VREF1 = VREF before temperature fluctuation
VREF2 = VREF after temperature fluctuation.
The LM4132 features a low thermal hysteresis of 75 ppm (typical) from -40°C to 125°C after 8 temperature
cycles.
(2)
TEMPERATURE COEFFICIENT
Temperature drift is defined as the maximum deviation in output voltage over the operating temperature range.
This deviation over temperature may be illustrated as shown in Figure 48.
Temperature
Change in Output Voltage
Voltage
VREF_MAX
VREF_MIN
Temperature Range
Figure 48. Illustrative VREF vs Temperature Profile
Temperature coefficient may be expressed analytically as the following:
TD =
(VREF_MAX - VREF_MIN)
VREF x 'T
x 106 ppm
(3)
TD = Temperature drift
VREF = Nominal preset output voltage
VREF_MIN = Minimum output voltage over operating temperature range
VREF_MAX = Maximum output voltage over operating temperature range
ΔT = Operating temperature range.
The LM4132 features a low temperature drift of 10ppm (max) to 30ppm (max), depending on the grade.
18
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
LONG TERM STABILITY
Long-term stability refers to the fluctuation in output voltage over a long period of time (1000 hours). The LM4132
features a typical long-term stability of 50ppm over 1000 hours. The measurements are made using 5 units of
each voltage option, at a nominal input voltage (5V), with no load, at room temperature.
EXPRESSION OF ELECTRICAL CHARACTERISTICS
Electrical characteristics are typically expressed in mV, ppm, or a percentage of the nominal value. Depending
on the application, one expression may be more useful than the other. To convert one quantity to the other one
may apply the following:
ppm to mV error in output voltage:
VREF x ppmERROR
103
= VERROR
Where
•
VREF is in volts (V) and VERROR is in milli-volts (mV).
(4)
Bit error (1 bit) to voltage error (mV):
VREF
2n
x 103 = VERROR
(5)
VREF is in volts (V), VERROR is in milli-volts (mV), and n is the number of bits.
mV to ppm error in output voltage:
VERROR
VREF
x 103 = ppmERROR
Where
•
VREF is in volts (V) and VERROR is in milli-volts (mV).
(6)
Voltage error (mV) to percentage error (percent):
VERROR
VREF
x 0.1 = Percent_Error
Where
•
VREF is in volts (V) and VERROR is in milli-volts (mV).
(7)
PRINTED CIRCUIT BOARD and LAYOUT CONSIDERATIONS
References in SOT packages are generally less prone to PC board mounting than devices in Small Outline
(SOIC) packages. To minimize the mechanical stress due to PC board mounting that can cause the output
voltage to shift from its initial value, mount the reference on a low flex area of the PC board, such as near the
edge or a corner.
The part may be isolated mechanically by cutting a U shape slot on the PCB for mounting the device. This
approach also provides some thermal isolation from the rest of the circuit.
Bypass capacitors must be mounted close to the part. Mounting bypass capacitors close to the part will reduce
the parasitic trace components thereby improving performance.
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
19
LM4132
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
www.ti.com
Typical Application Circuits
V REF
Input
VIN
VREF
C OUT
CIN
R
R
+5V
-VREF
LM4132
-5V
Enable
R/2
EN
GND
4.7 µF < C OUT < 10 µF
Figure 49. Voltage Reference with Complimentary Output
+5V
Input
VIN
VREF
VREF_FORCE
CIN
0.1 µF
LM4132
Enable
EN
100 k:
VREF_SENSE
GND
Figure 50. Precision Voltage Reference with Force and Sense Output
Input
VIN
Output
VREF
CIN
R1
500:
LM4132
0.1 µF
Enable
EN
RSET
GND
I OUT
IOUT = (VREF/(R1 + RSET)) + IGND
IGND
RL
1 k:
Figure 51. Programmable Current Source
20
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
LM4132
www.ti.com
SNVS372C – AUGUST 2005 – REVISED APRIL 2013
REVISION HISTORY
Changes from Revision B (April 2013) to Revision C
•
Page
Changed layout of National Data Sheet to TI format .......................................................................................................... 20
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LM4132
21
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM4132AMF-1.8
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4AA
LM4132AMF-1.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AA
LM4132AMF-2.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4BA
LM4132AMF-2.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BA
LM4132AMF-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CA
LM4132AMF-3.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4DA
LM4132AMF-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DA
LM4132AMF-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4EA
LM4132AMF-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4EA
LM4132AMF-4.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4FA
LM4132AMF-4.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FA
LM4132AMFX-1.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4AA
LM4132AMFX-1.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AA
LM4132AMFX-2.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4BA
LM4132AMFX-2.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BA
LM4132AMFX-2.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CA
LM4132AMFX-3.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4DA
LM4132AMFX-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DA
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM4132AMFX-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4EA
LM4132AMFX-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4EA
LM4132AMFX-4.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4FA
LM4132AMFX-4.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FA
LM4132BMF-1.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AB
LM4132BMF-2.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4BB
LM4132BMF-2.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BB
LM4132BMF-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CB
LM4132BMF-3.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4DB
LM4132BMF-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DB
LM4132BMF-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4EB
LM4132BMF-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4EB
LM4132BMF-4.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4FB
LM4132BMF-4.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FB
LM4132BMFX-1.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4AB
LM4132BMFX-1.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AB
LM4132BMFX-2.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4BB
LM4132BMFX-2.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BB
LM4132BMFX-2.5
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4CB
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM4132BMFX-2.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CB
LM4132BMFX-3.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4DB
LM4132BMFX-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DB
LM4132BMFX-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4EB
LM4132BMFX-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4EB
LM4132BMFX-4.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4FB
LM4132BMFX-4.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FB
LM4132CMF-1.8
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4AC
LM4132CMF-1.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AC
LM4132CMF-2.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4BC
LM4132CMF-2.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BC
LM4132CMF-2.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4CC
LM4132CMF-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CC
LM4132CMF-3.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4DC
LM4132CMF-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DC
LM4132CMF-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4EC
LM4132CMF-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4EC
LM4132CMF-4.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4FC
LM4132CMF-4.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FC
Addendum-Page 3
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM4132CMFX-1.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4AC
LM4132CMFX-1.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AC
LM4132CMFX-2.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4BC
LM4132CMFX-2.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BC
LM4132CMFX-2.5
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4CC
LM4132CMFX-2.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CC
LM4132CMFX-3.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4DC
LM4132CMFX-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DC
LM4132CMFX-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4EC
LM4132CMFX-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4EC
LM4132CMFX-4.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4FC
LM4132CMFX-4.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FC
LM4132DMF-1.8
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4AD
LM4132DMF-1.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AD
LM4132DMF-2.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4BD
LM4132DMF-2.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BD
LM4132DMF-2.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4CD
LM4132DMF-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CD
LM4132DMF-3.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4DD
Addendum-Page 4
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM4132DMF-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DD
LM4132DMF-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4ED
LM4132DMF-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4ED
LM4132DMF-4.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4FD
LM4132DMF-4.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FD
LM4132DMFX-1.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4AD
LM4132DMFX-1.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AD
LM4132DMFX-2.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4BD
LM4132DMFX-2.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BD
LM4132DMFX-2.5
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4CD
LM4132DMFX-2.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CD
LM4132DMFX-3.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4DD
LM4132DMFX-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DD
LM4132DMFX-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4ED
LM4132DMFX-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4ED
LM4132DMFX-4.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4FD
LM4132DMFX-4.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FD
LM4132EMF-1.8
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4AE
LM4132EMF-1.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AE
Addendum-Page 5
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM4132EMF-2.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4BE
LM4132EMF-2.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BE
LM4132EMF-2.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4CE
LM4132EMF-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CE
LM4132EMF-3.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4DE
LM4132EMF-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DE
LM4132EMF-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4EE
LM4132EMF-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4EE
LM4132EMF-4.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
R4FE
LM4132EMF-4.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FE
LM4132EMFX-1.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4AE
LM4132EMFX-1.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4AE
LM4132EMFX-2.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4BE
LM4132EMFX-2.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4BE
LM4132EMFX-2.5
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4CE
LM4132EMFX-2.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4CE
LM4132EMFX-3.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4DE
LM4132EMFX-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4DE
LM4132EMFX-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4EE
Addendum-Page 6
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM4132EMFX-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4EE
LM4132EMFX-4.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
R4FE
LM4132EMFX-4.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
R4FE
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 7
Samples
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
LM4132AMF-1.8
SOT-23
DBV
5
1000
178.0
8.4
LM4132AMF-1.8/NOPB
SOT-23
DBV
5
1000
178.0
LM4132AMF-2.0
SOT-23
DBV
5
1000
178.0
LM4132AMF-2.0/NOPB
SOT-23
DBV
5
1000
LM4132AMF-2.5/NOPB
SOT-23
DBV
5
W
Pin1
(mm) Quadrant
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMF-3.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMF-3.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMF-3.3
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMF-3.3/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMF-4.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMF-4.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMFX-1.8
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMFX-1.8/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMFX-2.0/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMFX-2.5/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMFX-3.0/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132AMFX-2.0
LM4132AMFX-3.0
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Package Pins
Type Drawing
SPQ
SOT-23
DBV
5
3000
178.0
8.4
LM4132AMFX-3.3/NOPB SOT-23
DBV
5
3000
178.0
8.4
SOT-23
DBV
5
3000
178.0
LM4132AMFX-4.1/NOPB SOT-23
DBV
5
3000
178.0
LM4132AMFX-3.3
LM4132AMFX-4.1
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
3.2
3.2
1.4
4.0
8.0
Q3
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-1.8/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-2.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-2.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-2.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-3.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-3.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-3.3
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-3.3/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-4.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMF-4.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMFX-1.8
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMFX-1.8/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMFX-2.0/NOPB SOT-23
LM4132BMFX-2.0
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMFX-2.5/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMFX-3.0/NOPB SOT-23
LM4132BMFX-2.5
LM4132BMFX-3.0
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMFX-3.3/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMFX-4.1/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132BMFX-3.3
LM4132BMFX-4.1
LM4132CMF-1.8
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-1.8/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-2.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-2.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-2.5
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-2.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-3.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-3.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-3.3
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-3.3/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-4.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMF-4.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMFX-1.8
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMFX-1.8/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMFX-2.0/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMFX-2.0
LM4132CMFX-2.5
SOT-23
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Package Pins
Type Drawing
LM4132CMFX-2.5/NOPB SOT-23
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMFX-3.0/NOPB SOT-23
LM4132CMFX-3.0
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMFX-3.3/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMFX-4.1/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132CMFX-3.3
LM4132CMFX-4.1
LM4132DMF-1.8
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-1.8/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-2.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-2.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-2.5
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-2.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-3.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-3.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-3.3
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-3.3/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-4.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMF-4.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMFX-1.8
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMFX-1.8/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMFX-2.0/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMFX-2.5/NOPB SOT-23
LM4132DMFX-2.0
LM4132DMFX-2.5
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMFX-3.0/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMFX-3.3/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132DMFX-4.1/NOPB SOT-23
LM4132DMFX-3.0
LM4132DMFX-3.3
LM4132DMFX-4.1
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-1.8
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-1.8/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-2.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-2.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-2.5
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-2.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-3.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-3.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-3.3
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-3.3/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-4.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMF-4.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Package Pins
Type Drawing
SPQ
SOT-23
DBV
5
3000
178.0
8.4
LM4132EMFX-1.8/NOPB SOT-23
DBV
5
3000
178.0
8.4
SOT-23
DBV
5
3000
178.0
LM4132EMFX-2.0/NOPB SOT-23
DBV
5
3000
178.0
SOT-23
DBV
5
3000
LM4132EMFX-2.5/NOPB SOT-23
LM4132EMFX-1.8
LM4132EMFX-2.0
LM4132EMFX-2.5
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
3.2
3.2
1.4
4.0
8.0
Q3
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMFX-3.0/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMFX-3.3/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMFX-4.1/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LM4132EMFX-3.0
LM4132EMFX-3.3
LM4132EMFX-4.1
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4132AMF-1.8
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-1.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-2.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-2.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
Pack Materials-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4132AMF-3.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-3.3/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-4.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMF-4.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132AMFX-1.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-1.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-2.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-2.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-2.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-3.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-4.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132AMFX-4.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMF-1.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-2.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-2.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-3.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-3.3/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-4.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMF-4.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132BMFX-1.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-1.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-2.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-2.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-2.5
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-2.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-3.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-4.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132BMFX-4.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMF-1.8
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-1.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-2.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-2.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-2.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
Pack Materials-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4132CMF-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-3.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-3.3/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-4.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMF-4.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132CMFX-1.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-1.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-2.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-2.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-2.5
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-2.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-3.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-4.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132CMFX-4.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMF-1.8
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-1.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-2.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-2.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-2.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-3.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-3.3/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-4.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMF-4.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132DMFX-1.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-1.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-2.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-2.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-2.5
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-2.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-3.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-4.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132DMFX-4.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMF-1.8
SOT-23
DBV
5
1000
210.0
185.0
35.0
Pack Materials-Page 6
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4132EMF-1.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-2.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-2.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-2.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-3.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-3.3/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-4.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMF-4.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LM4132EMFX-1.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-1.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-2.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-2.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-2.5
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-2.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-3.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-4.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LM4132EMFX-4.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
Pack Materials-Page 7
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated