SUNLED LUS12C

Part Number:
www.SunLED.com
LUS12C
T-1 3/4 (5mm) SOLID STATE LAMP
Features
z LOW POWER CONSUMPTION.
z POPULAR T-1 3/4 DIAMETER PACKAGE.
z GENERAL PURPOSE LEADS.
z RELIABLE AND RUGGED.
z LONG LIFE - SOLID STATE RELIABILITY.
z AVAILABLE ON TAPE AND REEL.
z RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
US
(GaAsP/GaP)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
145
mA
Power Dissipation
PT
62.5
mW
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
°C
Lead Solder Temperature
[2mm Below Package Base]
260°C For 3 Seconds
Lead Solder Temperature
[5mm Below Package Base]
260°C For 5 Seconds
Part
Number
LUS12C
Emitting
Color
Orange
Published Date : MAR 22, 2008
Emitting
Material
GaAsP/GaP
Operating Characteristics
(TA=25°C)
Unit
Forward Voltage (Typ.)
(IF=10mA)
VF
1.95
V
Forward Voltage (Max.)
(IF=10mA)
VF
2.5
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength Of Peak
Emission (Typ.)
(IF=10mA)
λP
607
nm
Wavelength Of Dominant
Emission (Typ.)
(IF=10mA)
λD
610
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
Δλ
35
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
15
pF
Lens-color
Orange Transparent
Drawing No : SDSA4767
US
(GaAsP/GaP)
Luminous
Intensity
( IF=10mA)
mcd
min.
typ.
40
79
V3
Wavelength
nm
λP
Viewing
Angle
2 θ 1/2
607
20°
Checked : B.L.LIU
P.1/4
Part Number:
www.SunLED.com
LUS12C
T-1 3/4 (5mm) SOLID STATE LAMP
™ US
Published Date : MAR 22, 2008
Drawing No : SDSA4767
V3
Checked : B.L.LIU
P.2/4
Part Number:
www.SunLED.com
LUS12C
T-1 3/4 (5mm) SOLID STATE LAMP
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 22, 2008
Drawing No : SDSA4767
V3
Checked : B.L.LIU
P.3/4
Part Number:
www.SunLED.com
T-1 3/4 (5mm) SOLID STATE LAMP
PACKING & LABEL SPECIFICATIONS
Published Date : MAR 22, 2008
LUS12C
Drawing No : SDSA4767
LUS12C
V3
Checked : B.L.LIU
P.4/4