RENESAS M3T-FLX

M3T-FLX-64NSA
Converter for Connecting 100-core Flexible Board FLX100 to 64-pin
0.8mm-pitch QFP/LQFP
External View and Dimensions
Function
The M3T-FLX-64NSA is a converter for connecting the FLX100
100-core flexible board to a foot pattern of a 64-pin 0.8mm-pitch
QFP(64P6N-A) or LQFP(64P6U-A). This converter can be used
during debugging and board-mounted evaluation in common.
Attaching Procedure
When debugging
(1) Mount the NQPACK064SA160.
(2) Attach the YQPACK064SA on the NQPACK064SA160.
(3) Secure the four corners of theYQPACK064SA by the included
YQ-GUIDE's.
(4) Attach the M3T-FLX-64NSA to the YQPACK064SA.
(5) Attach the probe of the emulation pod to the
M3T-FLX-64NSA.
During board-mounted evaluation
On top of NQPACK064SA160 that is mounted on the target
system, attach the MCU with on-chip flash memory or one-time
PROM and the HQPACK064SA (option)*1 or
HQPACK064SA160 (option)*1 in that order.
*1. For MCU package 64P6N-A : HQPACK064SA
For MCU package 64P6U-A : HQPACK064SA160
Package Components
• M3T-FLX-64NSA converter
• YQPACK064SA (made by Tokyo Eletech Co., Ltd.)
• NQPACK064SA160 (made by Tokyo Eletech Co., Ltd.)
• YQ-GUIDE (× 4)
• User's manual
*Required components to connect to the target system are included with
this product package. Each component made by Tokyo Eletech Co., Ltd.
is optionally available alone from Tokyo Eletech Co., Ltd.
See Appendix G "Contact Addresses for Partner Products".
Recommended Foot Pattern (Unit: mm)
[Ordering Information] See Appendix H "Ordering Information".
*All brand names and product names are trademarks or registered trademarks of their respective companies.