PHILIPS MB2241

INTEGRATED CIRCUITS
MB2241
16-bit buffer/line driver (3-State)
Product specification
Supersedes data of 1993 Aug 18
IC23 Data Handbook
1998 Jan 16
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
FEATURES
DESCRIPTION
• 16–bit bus interface
• Power 3-State
• Multiple VCC and GND pins minimize switching noise
• 3-State buffers
• Output capability: +64mA/–32mA
• Latch-up protection exceeds 500mA per Jedec Std 17
• ESD protection exceeds 2000 V per MIL STD 883 Method 3015
The MB2241 high-performance BiCMOS device combines low
static and dynamic power dissipation with high speed and high
output drive.
The MB2241 device is a 16-bit buffer that is ideal for driving bus
lines. The device features four Output Enables (1OE, 2OE, 3OE,
4OE), each controlling four of the 3-State outputs.
and 200 V per Machine Model
• Inputs are disabled during 3-State mode
QUICK REFERENCE DATA
SYMBOL
CONDITIONS
Tamb = 25°C;
GND = 0V
PARAMETER
TYPICAL
UNIT
3.0
3.1
ns
tPLH
tPHL
Propagation delay
nAx to nYx
CL = 50pF;
VCC = 5V
CIN
Input capacitance
VI = 0V or VCC
4
pF
COUT
Output capacitance
VO = 0V or VCC; 3-State
7
pF
ICCZ
Total supply current
Outputs disabled; VCC = 5.5V
65
µA
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
OUTSIDE NORTH AMERICA
NORTH AMERICA
DWG NUMBER
–40°C to +85°C
MB2241 BB
MB2241 BB
SOT379-1
52–pin plastic Quad Flat Pack
50 49 48 47
46 45 44 43 42
PIN NUMBER
SYMBOL
41 40
44, 43, 41, 40,
38, 37, 35, 34,
32, 31, 29, 28,
26, 25, 23, 22
1A0 – 1A3,
2A0 – 2A3,
3A0 – 3A3,
4A0 – 4A3
Data inputs
14, 15, 17, 18,
8, 9, 11, 12,
2, 3, 5, 6,
48, 49, 51, 52
4Y0 – 4Y3,
3Y0 – 3Y3,
2Y0 – 2Y3,
1Y0 – 1Y3
Data outputs
47, 45,
21, 19
1OE, 2OE,
3OE, 4OE
Output enables
4, 7, 10, 16,
20, 24, 30, 33,
36, 42, 46, 50
GND
Ground (0V)
1, 13, 27, 39
VCC
Positive supply voltage
1A2
GND
1A1
1A0
20E
GND
1OE
1Y0
1Y1
PIN DESCRIPTION
1A3
52 51
GND
1Y2
1Y3
PIN CONFIGURATION
VCC
1
2Y0
2
39 V
CC
38 2A0
2Y1
3
37 2A1
GND
4
36 GND
2Y2
5
35 2A2
2Y3
6
GND
7
33 GND
3Y0
8
32 3A0
3Y1
9
31 3A1
È
52-pin PQFP
34 2A3
29 3A2
3Y3 12
28 3A3
VCC 13
27 VCC
1998 Jan 16
26
4A0
4A1
GND
4A2
4A3
GND
3OE
4Y3
21 22 23 24 25
GND
17 18 19 20
4Y1
14 15 16
4OE
3Y2 11
4Y2
30 GND
4Y0
GND 10
NAME AND FUNCTION
SB00024
2
853–1571 18869
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
LOGIC SYMBOL
44
43
41
40
47
38
37
35
34
45
1A0
1Y0
1A1
1Y1
1A2
1Y2
1A3
1Y3
48
32 3A0
3Y0
49
31
3A1
3Y1
3A2
3Y2
3A3
3Y3
51
29
52
28
1OE
2Y0
2A1
2Y1
2A2
2Y2
2A3
2Y3
2
3
26
25
5
23
6
22
2OE
9
11
12
3OE
19
2A0
8
4A0
4Y0
4A1
4Y1
4A2
4Y2
4A3
4Y3
14
15
17
18
4OE
21
SB00025
LOGIC SYMBOL (IEEE/IEC)
47
19
EN1
44
EN3
48
32
43
49
31
9
41
51
29
11
40
52
28
12
45
1
21
EN2
38
3
8
EN4
2
26
37
3
25
35
5
23
17
34
6
22
18
2
4
14
15
SB00026
SB00027
FUNCTION TABLE
INPUTS
OUTPUTS
1OE or 3OE
1An or 3An
2OE or 4OE
2An or 4An
1Yn or 3Yn
2Yn or 4Yn
L
L
H
L
H
X
H
H
L
L
H
X
L
H
Z
L
H
Z
H = High voltage level
L = Low voltage level
Z = High voltage level-impedance ”OFF” state
1998 Jan 16
3
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
ABSOLUTE MAXIMUM RATINGS1, 2
PARAMETER
SYMBOL
VCC
IIK
CONDITIONS
RATING
UNIT
–0.5 to +7.0
V
–18
mA
–1.2 to +7.0
V
VO < 0
–50
mA
output in Off or High state
–0.5 to +5.5
V
output in Low state
128
mA
–65 to 150
°C
DC supply voltage
DC input diode current
VI < 0
voltage3
VI
DC input
IOK
DC output diode current
voltage3
VOUT
DC output
IOUT
DC output current
Tstg
Storage temperature range
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL
VCC
PARAMETER
LIMITS
DC supply voltage
UNIT
Min
Max
4.5
5.5
V
0
VCC
V
VI
Input voltage
VIH
High-level input voltage
VIL
Low-level Input voltage
0.8
V
IOH
High-level output current
–32
mA
IOL
Low-level output current
64
mA
0
10
ns/V
–40
+85
°C
∆t/∆v
Input transition rise or fall rate
Tamb
Operating free-air temperature range
1998 Jan 16
2.0
4
V
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
DC ELECTRICAL CHARACTERISTICS
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Min
VIK
VOH
VOL
Input clamp voltage
High-level output voltage
Tamb = –40°C
to +85°C
Tamb = +25°C
VCC = 4.5V; IIK = –18mA
Typ
Max
–0.9
–1.2
Min
UNIT
Max
–1.2
V
VCC = 4.5V; IOH = –3mA; VI = VIL or VIH
2.5
2.9
2.5
V
VCC = 5.0V; IOH = –3mA; VI = VIL or VIH
3.0
3.4
3.0
V
VCC = 4.5V; IOH = –32mA; VI = VIL or VIH
2.0
2.4
2.0
V
Low-level output voltage
VCC = 4.5V; IOL = 64mA; VI = VIL or VIH
0.42
0.55
0.55
V
Input leakage current
VCC = 5.5V; VI = GND or 5.5V
±0.01
±1.0
±1.0
µA
Power-off leakage current
VCC = 0.0V; VO or VI ≤ 4.5V
±5.0
±100
±100
µA
Power-up/down 3-State
output current
VCC = 2.0V; VO = 0.5V; VI = GND or VCC;
V OE = VCC; VOE = GND
±5.0
±50
±50
µA
IOZH
3-State output High current
VCC = 5.5V; VO = 2.7V; VI = VIL or VIH
5.0
50
50
µA
IOZL
3-State output Low current
VCC = 5.5V; VO = 0.5V; VI = VIL or VIH
–5.0
–50
–50
µA
ICEX
Output high leakage current
VCC = 5.5V; VO = 5.5V; VI = GND or VCC
5.0
50
50
µA
–70
–180
–180
mA
VCC = 5.5V; Outputs High, VI = GND or VCC
65
250
250
µA
VCC = 5.5V; Outputs Low, VI = GND or VCC
48
60
60
mA
VCC = 5.5V; Outputs 3-State;
VI = GND or VCC
65
250
250
µA
Outputs enabled, one input at 3.4V, other
inputs at VCC or GND; VCC = 5.5V
0.5
1.5
1.5
mA
II
IOFF
IPU/IPU
IO
Output
current1
ICCH
ICCL
Quiescent supply current
ICCZ
∆ICC
Additional supply current per
input pin2
VCC = 5.5V; VO = 2.5V
–50
–50
NOTES:
1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
2. This is the increase in supply current for each input at 3.4V.
AC CHARACTERISTICS
GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω
LIMITS
SYMBOL
PARAMETER
Tamb = +25°C
VCC = +5.0V
WAVEFORM
Tamb = –40°C to +85°C
VCC = +5.0V ±0.5V
Min
Typ
Max
Min
Max
UNIT
tPLH
tPHL
Propagation delay
nAx to nYx
1
1.2
1.2
3.0
3.1
4.5
4.5
1.2
1.2
5.1
5.1
ns
tPZH
tPZL
Output enable time
to High and Low level
2
1.3
1.8
3.7
4.8
6.3
6.8
1.3
1.8
6.9
7.4
ns
tPHZ
tPLZ
Output disable time
from High and Low level
2
1.3
1.2
3.9
3.4
5.9
5.2
1.3
1.2
6.7
5.8
ns
1998 Jan 16
5
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
AC WAVEFORMS
VM = 1.5V, VIN = GND to 3.0V
nOE INPUT
nOE INPUT
nAx INPUT
VM
VM
VM
VM
tPLZ
tPZL
tPLH
nYx OUTPUT
VM
VM
VM
nYx OUTPUT
3.5V
tPHL
VOL + 0.3V
VOL
tPHZ
tPZH
VOH
VOH – 0.3V
SB00028
nYx OUTPUT
VM
Waveform 1. Waveforms Showing the Input (nAx) to Output
(nYx) Propagation Delays
0V
SB00029
Waveform 2. Waveforms Showing the 3-State Output Enable
and Disable Times
TEST CIRCUIT AND WAVEFORMS
VCC
7.0V
RL
VOUT
VIN
PULSE
GENERATOR
tW
90%
NEGATIVE
PULSE
90%
CL
VM
VM
10%
10%
0V
D.U.T.
RT
RL
tTHL (tF)
tTLH (tR)
tTLH (tR)
tTHL (tF)
90%
POSITIVE
PULSE
Test Circuit for 3-State Outputs
AMP (V)
90%
VM
VM
10%
10%
tW
SWITCH POSITION
TEST
SWITCH
tPLZ
closed
tPZL
closed
All other
open
Load resistor; see AC CHARACTERISTICS for value.
CL =
Load capacitance includes jig and probe capacitance; see AC
CHARACTERISTICS for value.
RT =
Termination resistance should be equal to ZOUT of pulse generators.
0V
VM = 1.5V
Input Pulse Definition
INPUT PULSE REQUIREMENTS
DEFINITIONS
RL =
AMP (V)
FAMILY
MB
Amplitude
Rep. Rate
tW
tR
tF
3.0V
1MHz
500ns
2.5ns
2.5ns
SB00010
1998 Jan 16
6
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
tPLH vs Temperature (Tamb)
CL = 50pF, 1 Output Switching
nAx to nYx
Adjustment of tPLH for
Load Capacitance and # of Outputs Switching
nAx to nYx
5
6
4
MAX
5
16 switching
8 switching
1 switching
3
Offset in ns
ns
4
4.5VCC
5.5VCC
3
2
1
2
0
MIN
1
–1
0
–2
–55
–35
–15
5
25
45
65
85
105
0
125
50
°C
100
150
200
pF
tPHL vs Temperature (Tamb)
CL = 50pF, 1 Output Switching
nAx to nYx
Adjustment of tPHL for
Load Capacitance and # of Outputs Switching
nAx to nYx
7
4
6
3
16 switching
8 switching
1 switching
MAX
5
Offset in ns
2
ns
4
4.5VCC
3
5.5VCC
1
0
2
MIN
–1
1
0
–2
–55
–35
–15
5
25
45
65
85
105
125
0
50
°C
200
Adjustment of tPZH for
Load Capacitance and # of Outputs Switching
nOE to nYx
8
5
7
MAX
4
16 switching
6
8 switching
3
Offset in ns
5
ns
150
pF
tPZH vs Temperature (Tamb)
CL = 50pF, 1 Output Switching
nOE to nYx
4
4.5VCC
3
5.5VCC
1 switching
2
1
0
2
–1
MIN
1
0
–55
100
–2
–35
–15
5
25
45
65
85
105
125
0
°C
50
100
150
200
pF
SB00030
1998 Jan 16
7
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
tPZL vs Temperature (Tamb)
CL = 50pF, 1 Output Switching
nOE to nYx
Adjustment of tPZL for
Load Capacitance and # of Outputs Switching
nOE to nYx
9
4
8
3
MAX
16 switching
8 switching
1 switching
7
2
Offset in ns
ns
6
4.5VCC
5
4
5.5VCC
1
0
3
–1
MIN
2
1
–2
–55
–35
–15
5
25
45
65
85
105
125
0
50
°C
150
200
pF
Adjustment of tPHZ for
Load Capacitance and # of Outputs Switching
nOE to nYx
tPHZ vs Temperature (Tamb)
CL = 50pF, 1 Output Switching
nOE to nYx
7
8
6
7
MAX
5
4.5VCC
4
5.5VCC
Offset in ns
6
ns
100
3
5
16 switching
4
8 switching
1 switching
3
2
1
2
0
MIN
1
–1
0
–2
–55
–35
–15
5
25
45
65
85
105
0
125
50
°C
100
150
200
pF
tPLZ vs Temperature (Tamb)
CL = 50pF, 1 Output Switching
nOE to nYx
Adjustment of tPLZ for
Load Capacitance and # of Outputs Switching
nOE to nYx
7
6
6
5
16 switching
8 switching
1 switching
MAX
4
5
ns
Offset in ns
4.5VCC
5.5VCC
4
3
2
3
2
1
0
MIN
1
–1
0
–55
–2
–35
–15
5
25
45
65
85
105
125
0
°C
50
100
150
200
pF
SB00031
1998 Jan 16
8
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
tTLH vs Temperature (Tamb)
CL = 50pF, 1 Output Switching
Adjustment of tTLH for
Load Capacitance and # of Outputs Switching
4
8
7
16 switching
8 switching
1 switching
6
5
Offset in ns
3
ns
4.5VCC
5.5VCC
2
4
3
2
1
0
–1
–2
1
–3
–55
–35
–15
5
25
45
65
85
105
125
0
50
°C
100
150
200
pF
tTHL vs Temperature (Tamb)
CL = 50pF, 1 Output Switching
Adjustment of tTHL for
Load Capacitance and # of Outputs Switching
3.0
4
3
16 switching
8 switching
1 switching
2.5
Offset in ns
2
4.5VCC
ns
2.0
5.5VCC
1
0
1.5
–1
1
–2
–55
–35
–15
5
25
45
65
85
105
0
125
50
°C
100
150
VOHP and VOLV vs Load Capacitance
VCC = 5V, VIN = 0 to 3V
VOHV and VOLP vs Load Capacitance
VCC = 5V, VIN = 0 to 3V
4.0
6
3.5
125°C
25°C
–55°C
3.0
5
4
125°C
25°C
–55°C
2.5
3
volts
2.0
volts
200
pF
1.5
1.0
2
1
0.5
125°C
25°C
–55°C
0.0
125°C
25°C
–55°C
0
–1
–0.5
–1
–2
0
50
100
150
200
0
pF
50
100
150
200
pF
SB00032
1998 Jan 16
9
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
QFP52: plastic quad flat package; 52 leads (lead length 1.6 mm); body 10 x 10 x 2.0 mm
1998 Jan 16
10
SOT379-1
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
NOTES
1998 Jan 16
11
Philips Semiconductors
Product specification
16-bit buffer/line driver (3-State)
MB2241
Data sheet status
Data sheet
status
Product
status
Definition [1]
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
 Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Document order number:
1998 Jan 16
12
Date of release: 05-96
9397-750-03804