MOTOROLA MGRB1018

Order this document
by MGRB1018/D
SEMICONDUCTOR TECHNICAL DATA

. . . ideally suited for high frequency power supplies, free wheeling diodes, and as polarity
protection diodes, these state-of-the-art devices have the following features:
•
•
•
•
•
GALLIUM ARSENIDE
RECTIFIER
10 AMPERES
180 VOLTS
Planar Epitaxial Construction
Nitride Passivation for Stable Blocking Characteristics
Monolithic Dual Die Available (MGRB2018CT)
Epoxy Meets UL94, VO @ 1/8″
Hyperfast and Soft Reverse Recovery Over Specified Temperature
Range (15 ns)
Mechanical Characteristics
• Weight: 1.9 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal Leads
are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
• Shipped 50 units per plastic tube
• Available in 24mm Tape and Reel, 800 units per reel by adding a T4
suffix to the part number
• Marking: MGRB1018
1,3
2,4
2, 4
1
3
CASE 418B–02
D2PAK
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VRRM
VRWM
VR
180
V
IDC
10
A
Peak Repetitive Forward Current
(At Rated VR, Square Wave, 20 kHz, TC = 85°C)
IFRM
20
A
Non–Repetitive Peak Surge Current
(Surge applied at rated load conditions, halfwave, single phase, 60 Hz)
IFSM
60
A
TJ, Tstg
– 55 to 175
°C
RθJC
RθJA
4.3
53
°C/W
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
DC Forward Current
(TC = 110°C)
Operating Junction Temperature and Storage Temperature
THERMAL CHARACTERISTICS
Thermal Resistance – Junction to Case
– Junction to Ambient
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (1), see Figure 2
(IF = 10 A)
(IF = 5 A)
VF
Maximum Instantaneous Reverse Current, see Figure 4
(VR = 180 V)
(VR = 90 V)
IR
Typical Reverse Recovery Time (2)
(VR = 150 V, IF = 5 A, di/dt = 200 A/µs)
(VR = 150 V, IF = 10 A, di/dt = 200 A/µs)
trr
Typical Peak Reverse Recovery Current
(VR = 150 V, IF = 5 A, di/dt = 200 A/µs)
(VR = 150 V, IF = 10 A, di/dt = 200 A/µs)
IRM
TJ=25°C
TJ=125°C
1.4
1.1
1.5
1.1
TJ=25°C
TJ=125°C
25
1
685
120
TJ=25°C
TJ=125°C
12.6
13
12.4
12.7
TJ=25°C
TJ=125°C
1.5
1.6
1.6
1.7
V
µA
ns
A
Note: This data sheet contains advance information only and is subject to change without notice.
(1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%.
(2) trr measured projecting from 25% of IRM to ground.
RF1995
Device Data
Motorola
Motorola, Inc.
1
100
50
50
20
20
I F , INSTANTANEOUS FORWARD CURRENT (A)
I F , INSTANTANEOUS FORWARD CURRENT (A)
100
10
5.0
TJ = 175°C
2.0
TJ = 25°C
1.0
0.5
10
5.0
TJ = 175°C
TJ = 25°C
2.0
TJ = 125°C
1.0
0.5
TJ = 125°C
0.2
0.2
0.1
0.1
0.2 0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
0.2 0.4
VF , INSTANTANEOUS FORWARD VOLTAGE (V)
I R , MAXIMUM REVERSE CURRENT (m A)
I R , REVERSE CURRENT (m A)
1.0
1.2
1.4
1.6
1.8
2.0
2.2 2.4
1000
1000
TJ = 175°C
100
10
TJ = 125°C
1
TJ = 25°C
0.1
0.01
0
20
40
60
80
100
120
140
VR, REVERSE VOLTAGE (V)
Figure 3. Typical Reverse Current
2
0.8
Figure 2. Maximum Forward Voltage
Figure 1. Typical Forward Voltage
0.001
0.6
VF , MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (V)
160
180
TJ = 125°C
100
10
TJ = 25°C
1
0.1
0.01
0.001
0
20
40
60
80
100
120
140
160
180
VR, REVERSE VOLTAGE (V)
Figure 4. Maximum Reverse Current
Motorola RF Device Data
35
freq = 20 kHz
dc
14
PFO , AVERAGE POWER DISSIPATION (W)
I O, AVERAGE FORWARD CURRENT (A)
16
square wave
12
10
Ipk/Io = p
8.0
6.0
4.0
2.0
0
dc
Ipk/Io = p
25
20
15
10
5
0
TC, CASE TEMPERATURE (°C)
Figure 5. Current Derating Per Leg
Figure 6. Forward Power Dissipation Per Leg
50
100
150
200
0
16
20
t rr , REVERSE RECOVERY TIME (ns)
VR = 150 V
IF = 10 A
15
IF = 1 A
IF = 5 A
10
5.0
50
VR = 150 V
IF = 10 A
15
IF = 1 A
IF = 5 A
10
5.0
100
150
200
250
300
50
100
di/dt, CURRENT SLEW RATE (A/ms)
150
200
250
300
di/dt, CURRENT SLEW RATE (A/ms)
Figure 8. Typical trr Characteristics, TJ = 125°C
Figure 7. Typical trr Characteristics, TJ = 25°C
0
0
VR = 150 V
– 0.5
– 1.0
IF = 1 A
– 1.5
IF = 5 A
– 2.0
IF = 10 A
– 2.5
– 3.0
50
100
150
200
250
300
I RM, MAXIMUM REVERSE CURRENT (A)
I RM, MAXIMUM REVERSE CURRENT (A)
square wave
4.0
8.0
12
IO, AVERAGE FORWARD CURRENT (A)
0
20
t rr , REVERSE RECOVERY TIME (ns)
TJ = 175°C
30
VR = 150 V
– 0.5
– 1.0
IF = 1 A
– 1.5
IF = 5 A
– 2.0
IF = 10 A
– 2.5
– 3.0
50
100
150
200
250
300
di/dt, CURRENT SLEW RATE (A/ms)
di/dt, CURRENT SLEW RATE (A/ms)
Figure 9. Typical IRM Characteristics, TJ = 25°C
Figure 10. Typical IRM Characteristics, TJ = 125°C
Motorola RF Device Data
3
R(T), NORMALIZED TRANSIENT
THERMAL RESISTANCE
1.0
0.5
SINGLE PULSE
0.2
0.1
0.001 0.002
0.005
0.01
0.02
0.05
0.1
0.2
t, TIME (s)
0.5
1.0
2.0
5.0
10
20
50
100
Figure 11. Typical Thermal Response
1000
C, CAPACITANCE (pF)
500
TJ = 25°C
200
100
50
20
10
1
2
5
10
20
50
100
200
VR, REVERSE VOLTAGE (V)
Figure 12. Typical Capacitance
4
Motorola RF Device Data
PACKAGE DIMENSIONS
C
E
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
V
B
4
A
1
2
S
3
–T–
SEATING
PLANE
K
J
G
D
STYLE 3:
PIN 1.
2.
3.
4.
H
ANODE
CATHODE
ANODE
CATHODE
DIM
A
B
C
D
E
G
H
J
K
S
V
INCHES
MIN
MAX
0.340
0.380
0.380
0.405
0.160
0.190
0.020
0.035
0.045
0.055
0.100 BSC
0.080
0.110
0.018
0.025
0.090
0.110
0.575
0.625
0.045
0.055
MILLIMETERS
MIN
MAX
8.64
9.65
9.65
10.29
4.06
4.83
0.51
0.89
1.14
1.40
2.54 BSC
2.03
2.79
0.46
0.64
2.29
2.79
14.60
15.88
1.14
1.40
3 PL
0.13 (0.005)
M
T
CASE 418B–02
ISSUE B
Motorola RF Device Data
5
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA / EUROPE: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: [email protected] – TOUCHTONE (602) 244–6609
INTERNET: http://Design–NET.com
HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
6
◊
*MGRB1018/D*
Motorola RF
Device Data
MGRB1018/D