MOTOROLA MHW1134

Order this document
by MHW1134/D
SEMICONDUCTOR TECHNICAL DATA
The RF Line
. . . designed specifically for broadband applications requiring low distortion
characteristics. Specified for use as return amplifiers for mid–split and high–split
2–way cable TV systems. Features all gold metallization system.
• Guaranteed Broadband Power Gain @ f = 5.0– 200 MHz
13.0 dB
18.0 dB
22.0 dB
24.0 dB
5.0 – 200 MHz
CATV HIGH–SPLIT
REVERSE AMPLIFIERS
• Guaranteed Broadband Noise Figure @ f = 5.0– 175 MHz
• Superior Gain, Return Loss and DC Current Stability with Temperature
• All Gold Metallization
• All Ion–Implanted Arsenic Emitter Transistor Chips with 6.0 GHz fT’s
• Circuit Design Optimized for Good RF Stability Under High VSWR Load Conditions
• Transformers Designed to Insure Good Low Frequency Gain Stability versus
Temperature
CASE 714–06, STYLE 1
ABSOLUTE MAXIMUM RATINGS
Rating
RF Voltage Input (Single Tone)
DC Supply Voltage
Symbol
Value
Unit
Vin
+ 65
dBmV
VCC
+ 28
Vdc
Operating Case Temperature Range
TC
– 20 to +100
°C
Storage Temperature Range
Tstg
– 40 to +100
°C
ELECTRICAL CHARACTERISTICS (VCC = 24 Vdc, TC = + 30°C, 75 W system)
Symbol
MHW1134
MHW1184
MHW1224
MHW1244
Units
Power Gain @ 10 MHz
GP
13.0 ± 0.5
18.5 ± 0.5
22.0 ± 0.5
24.0 ± 0.5
dB
Frequency Range (Response/Return Loss) Note 1
BW
5.0–200
MHz
Cable Slope Equivalent (5.0– 200 MHz)
S
– 0.2 Min/+ 0.8 Max
dB
Gain Flatness (5.0 – 200 MHz)
F
± 0.2 Max
dB
Input/Output Return Loss (5.0– 200 MHz) Note 1
IRL/ORL
18.0 Min
dB
Cross Modulation Distortion @ +50 dBmV per ch.
12–Channel FLAT (5.0 – 120 MHz)
22–Channel FLAT (5.0 – 175 MHz) (2) (3)
26–Channel FLAT (5.0 – 200 MHz)
XM12
XM22
XM26
Characteristic
– 70 Typ
– 65 Max
– 65 Typ
– 68 Typ
– 64 Max
– 64 Typ
– 67 Typ
– 62 Max
– 62 Typ
– 66 Typ
– 61 Max
– 61 Typ
dB
dB
dB
NOTES:
1. Response and return loss characteristics are tested and guaranteed for the full 5.0 – 200 MHz frequency range.
2. Motorola 100% distortion and noise figure testing is performed over the 5.0 – 175 MHz frequency range. Cross modulation and composite triple
beat testing are with 22–channel loading; Video carriers used are:
T7 – T13
7.0 – 43.0 MHz
7–Channels
2–6
55.25 – 83.25 MHz
5–Channels
A–7
121.25 – 175.25 MHz 10–Channels
3. Video carriers used for 12–Channel typical performances are T7 – 6; For 26–Channel typical performance, Channels 8, 9, 10 and 11 are added
to the 22–Channel carriers listed above.
REV 6
RF DEVICE DATA
MOTOROLA
Motorola, Inc. 1994
MHW1134 MHW1184 MHW1224 MHW1244
1
ELECTRICAL CHARACTERISTICS — continued (VCC = 24 Vdc, TC = + 30°C, 75 W system)
Characteristic
Symbol
MHW1134
MHW1184
MHW1224
MHW1244
Units
Composite Triple Beat Distortion @ +50 dBmV per ch.
22–Channel FLAT (5.0 – 175 MHz)
Notes 2 and 3
26–Channel FLAT (5.0 – 200 MHz)
CTB22
CTB26
– 73 Max
– 71 Typ
– 72 Max
– 70 Typ
– 69 Max
– 68.5 Typ
– 68 Max
– 67.5 Typ
dB
dB
TB3
TB3
– 90 Typ
– 87 Typ
– 88 Typ
– 85 Typ
– 88 Typ
– 85 Typ
– 87 Typ
– 84 Typ
dB
dB
Second Order Distortion @ +50 dBmV per ch.
High–Split (5.0– 175 MHz) CH2, CHA @ 176.5 MHz
IMD
– 72 Max
– 72 Max
– 72 Max
– 72 Max
dB
Noise Figure
High–Split (5.0– 175 MHz) Note 2
NF
7.0 Max
5.5 Max
5.5 Max
5.0 Max
dB
DC Current
IDC
Individual Triple Beat Distortion @ +50 dBmV per ch.
Mid–Split (5.0– 120 MHz) T11, T12 and CH2 @
123.25 MHz
High–Split (5.0– 175 MHz) T13, CH2 and CH5 @
175.5 MHz
210 Typ/240 Max
mAdc
NOTES:
1. Response and return loss characteristics are tested and guaranteed for the full 5.0 – 200 MHz frequency range.
2. Motorola 100% distortion and noise figure testing is performed over the 5.0 – 175 MHz frequency range. Cross modulation and composite triple
beat testing are with 22–channel loading; Video carriers used are:
T7 – T13
7.0 – 43.0 MHz
7–Channels
2–6
55.25 – 83.25 MHz
5–Channels
A–7
121.25 – 175.25 MHz 10–Channels
3. Video carriers used for 12–Channel typical performances are T7 – 6; For 26–Channel typical performance, Channels 8, 9, 10 and 11 are added
to the 22–Channel carriers listed above.
MHW1134 MHW1184 MHW1224 MHW1244
2
MOTOROLA RF DEVICE DATA
PACKAGE DIMENSIONS
Q
–A–
0.25 (0.010)
S
–Z–
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
2 PL
T F
M
M
A
M
V
–F–
R
J
B
6–32UNC–2B 2 PL
0.25 (0.010)
M
Z T A
M
U
1 23
5
789
C
K
–E–
W
–T–
N
G
P
D
L
7 PL
0.25 (0.010)
M
T A
M
DIM
A
B
C
D
E
F
G
J
K
L
N
P
Q
R
S
U
V
W
INCHES
MIN
MAX
–––
1.775
–––
1.085
–––
0.840
0.018
0.022
0.465
0.510
0.300
0.325
0.100 BSC
0.156 BSC
0.315
0.355
1.00 BSC
0.165 BSC
0.100 BSC
0.148
0.168
–––
0.595
1.500 BSC
0.200 BSC
0.280 BSC
0.435
0.450
STYLE 1:
PIN 1.
2.
3.
4.
5.
6.
7.
8.
9.
MILLIMETERS
MIN
MAX
–––
45.08
–––
27.56
–––
21.34
0.46
0.56
11.81
12.95
7.62
8.25
2.54 BSC
3.96 BSC
8.00
8.50
25.40 BSC
4.10 BSC
2.54 BSC
3.76
4.27
–––
15.11
38.10 BSC
5.08 BSC
7.11 BSC
11.05
11.43
RF INPUT
GROUND
GROUND
DELETED
VDC
DELETED
GROUND
GROUND
RF OUTPUT
CASE 714–06
ISSUE K
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
MOTOROLA RF DEVICE DATA
MHW1134 MHW1184 MHW1224 MHW1244
3
Literature Distribution Centers:
USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan.
ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
◊
MHW1134 MHW1184 MHW1224 MHW1244
4
*MHW1134/D*
MHW1134/D
MOTOROLA RF DEVICE
DATA