ETC NC7WZ07P6

Revised January 2001
NC7WZ07
TinyLogic UHS Dual Buffer (Open Drain Outputs)
General Description
Features
The NC7WZ07 is a dual buffer with open drain outputs
from Fairchild’s Ultra High Speed Series of TinyLogic in
the space saving SC70 6-lead package. The device is fabricated with advanced CMOS technology to achieve ultra
high speed with high output drive while maintaining low
static power dissipation over a very broad VCC operating
range. The device is specified to operate over the 1.65V to
5.5V VCC range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V
independent of VCC operating voltage.
■ Space saving SC70 6-lead package
■ Ultra High Speed: tPZL 2.3 ns Typ into 50 pF at 5V VCC
■ High IOL Output Drive: +24 mA at 3V VCC
■ Broad VCC Operating Range: 1.65V to 5.5V
■ Matches the performance of LCX when operated at
3.3V VCC
■ Power down high impedance inputs/outputs
■ Overvoltage tolerant inputs facilitate 5V to 3V translation
■ Patented noise/EMI reduction circuitry implemented
Ordering Code:
Order
Package
Product Code
Number
Number
Top Mark
NC7WZ07P6
MAA06A
Z07
6-Lead SC70, EIAJ SC88, 1.25mm Wide
250 Units on Tape and Reel
NC7WZ07P6X
MAA06A
Z07
6-Lead SC70, EIAJ SC88, 1.25mm Wide
3k Units on Tape and Reel
Package Description
Supplied As
Connection Diagrams
Logic Symbol
IEEE/IEC
(Top View)
Pin Descriptions
Pin One Orientation Diagram
Pin Names
Description
A1 , A2
Data Inputs
Y1 , Y2
Output
Function Table
Y=A
Input
Output
A
Y
L
L
H
Z
AAA represents Product Code Top Mark - see ordering code
Note: Orientation of Top Mark determines Pin One location. Read the top
product code mark left to right, Pin One is the lower left pin (see diagram).
H = HIGH Logic Level
L = LOW Logic Level
TinyLogic is a trademark of Fairchild Semiconductor Corporation.
© 2001 Fairchild Semiconductor Corporation
DS500218
www.fairchildsemi.com
NC7WZ07 TinyLogic UHS Dual Buffer (Open Drain Outputs)
March 1999
NC7WZ07
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 2)
Supply Voltage (VCC )
−0.5V to +7V
DC Input Voltage (VIN)
−0.5V to +7V
Supply Voltage Operating (VCC)
DC Output Voltage (VOUT)
−0.5V to +7V
Supply Voltage Data Retention (VCC)
DC Input Diode Current (IIK)
1.65V to 5.5V
1.5V to 5.5V
Input Voltage (VIN)
@ VIN < −0.5V
−50 mA
0V to 5.5V
Output Voltage (VOUT)
DC Output Diode Current (IOK)
0V to 5.5V
−40°C to +85°C
Operating Temperature (TA)
@ VOUT < −0.5V
−50 mA
Input Rise and Fall Time (tr, tf)
±50 mA
VCC = 1.8V, 2.5V ± 0.2V
0 ns/V to 20 ns/V
±100 mA
VCC = 3.3V ± 0.3V
0 ns/V to 10 ns/V
−65°C to +150 °C
VCC = 5.0V ± 0.5V
0 ns/V to 5 ns/V
DC Output Current (IOUT)
DC VCC/GND Current (ICC/IGND)
Storage Temperature (TSTG)
150 °C
Junction Temperature under Bias (TJ)
Thermal Resistance (θJA)
350 ° C/W
Junction Lead Temperature (TL)
260 °C
(Soldering, 10 seconds)
Power Dissipation (PD) @ +85°C
180 mW
Note 1: Absolute maximum ratings are DC values beyond which the device
may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is
reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications.
Note 2: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol
VIH
Parameter
HIGH Level Input Voltage
(V)
ILKG
LOW Level Input Voltage
HIGH Level Output
Leakage Current
VOL
LOW Level Output Voltage
IIN
Input Leakage Current
IOFF
Power Off Leakage Current
ICC
Quiescent Supply Current
www.fairchildsemi.com
Min
Typ
TA = −40°C to +85°C
Max
1.65 to 1.95 0.75 VCC
2.3 to 5.5
VIL
TA = +25°C
VCC
Min
Max
0.75 VCC
Conditions
V
0.7 VCC
0.7 VCC
Units
1.65 to 1.95
0.25 VCC
0.25 VCC
2.3 to 5.5
0.3 VCC
0.3 VCC
1.65 to 5.5
±5
±10
1.65
0.0
0.1
0.0
1.8
0.0
0.1
0.1
2.3
0.0
0.1
0.1
3.0
0.0
0.1
0.1
V
µA
V
VIN = VIH
VOUT = VCC or GND
VIN = VIL
IOL = 100 µA
4.5
0.0
0.1
0.1
1.65
0.08
0.24
0.24
IOL = 4 mA
2.3
0.10
0.3
0.3
IOL = 8 mA
IOL = 16 mA
3.0
0.16
0.4
0.4
3.0
0.24
0.55
0.55
4.5
0.25
0.55
0.55
±0.1
±1.0
µA
0 ≤ VIN ≤ 5.5V
0.0
1
10
µA
VIN or VOUT = 5.5V
1.65 to 5.5
1.0
10
µA
VIN = 5.5V, GND
0 to 5.5
2
V
IOL = 24 mA
IOL = 32 mA
Symbol
tPZL
tPLZ
Parameter
Propagation Delay
Propagation Delay
TA = +25°C
VCC
TA = −40°C to +85°C
(V)
Min
Typ
Max
Min
Max
1.65
1.8
6.6
11.5
1.8
12.6
Units
Conditions
CL = 50 pF
1.8
1.8
5.5
9.5
1.8
10.5
2.5 ± 0.2
1.2
3.7
5.8
1.2
6.4
3.3 ± 0.3
0.8
2.9
4.4
0.8
4.8
RD = 500Ω
VI = 2 x VCC
5.0 ± 0.5
0.5
2.3
3.5
0.5
3.9
1.65
1.8
5.5
11.5
1.8
12.6
1.8
1.8
4.3
9.5
1.8
10.5
2.5 ± 0.2
1.2
2.8
5.8
1.2
6.4
3.3 ± 0.3
0.8
2.1
4.4
0.8
4.8
5.0 ± 0.5
0.5
1.4
3.5
0.5
3.9
CIN
Input Capacitance
COUT
Output Capacitance
CPD
Power Dissipation
Capacitance
5.0
4
ns
RU = 500Ω
CL = 50 pF
ns
RU = 500Ω
RD = 500Ω
Fig. No.
Figures
1, 3
Figures
1, 3
VI = 2 x VCC
0
2.5
pF
0
4.0
pF
3.3
3
pF
(Note 3)
Figure 2
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression:
ICCD = (C PD)(VCC)(fIN) + (ICCstatic).
AC Loading and Waveforms
CL includes load and stray capacitance
Input PRR = 1.0 MHz; tW = 500 ns
FIGURE 1. AC Test Circuit
FIGURE 3. AC Waveforms
Input = AC Waveform; tr = tf = 1.8 ns;
PRR = 10 MHz; Duty Cycle = 50%
FIGURE 2. ICCD Test Circuit
3
www.fairchildsemi.com
NC7WZ07
AC Electrical Characteristics
NC7WZ07
Tape and Reel Specification
TAPE FORMAT
Package
Designator
Tape
Number
Cavity
Section
Cavities
Status
Status
125 (typ)
Empty
Sealed
Sealed
Leader (Start End)
P6
Carrier
P6X
Cover Tape
250
Filled
Trailer (Hub End)
75 (typ)
Empty
Sealed
Leader (Start End)
125 (typ)
Empty
Sealed
3000
Filled
Sealed
75 (typ)
Empty
Sealed
Carrier
Trailer (Hub End)
TAPE DIMENSIONS inches (millimeters)
Package
SC70-6
Tape Size
8 mm
www.fairchildsemi.com
DIM A
DIM B
0.093
0.096
(2.35)
(2.45)
DIM F
DIM Ko
0.138 ± 0.004 0.053 ± 0.004
(3.5 ± 0.10)
4
(1.35 ± 0.10)
DIM P1
DIM W
0.157
0.315 ± 0.004
(4)
(8 ± 0.1)
NC7WZ07
Tape and Reel Specification
(Continued)
REEL DIMENSIONS inches (millimeters)
Tape
Size
8 mm
A
B
C
D
N
W1
W2
W3
7.0
0.059
0.512
0.795
2.165
0.331 + 0.059/−0.000
0.567
W1 + 0.078/−0.039
(177.8)
(1.50)
(13.00)
(20.20)
(55.00)
(8.40 + 1.50/−0.00)
(14.40)
(W1 + 2.00/−1.00)
5
www.fairchildsemi.com
NC7WZ07 TinyLogic UHS Dual Buffer (Open Drain Outputs)
Physical Dimensions inches (millimeters) unless otherwise noted
6-Lead SC70, EIAJ SC88, 1.25mm Wide
Package Number MAA06A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
6