MURATA NFM21PC474R1C3D

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
Data Sheet
EMIFILr (Capacitor type)
1
Single Circuit Type for Large Current
NFM21P Series (0805 Size)
■ Dimensions
■ Insertion Loss Characteristics (Main Items)
0.3±0.2
0.4±0.2
(50Ω - 50Ω)
0
0.85±0.1
NFM21PC104R1E3
Insertion Loss (dB)
0.6±0.2
1.25±0.1
2.0±0.2
NFM21PC224R1C3
20
(2)
NFM21PC474R1C3
NFM21PC105B1A3 (10V)
NFM21PC105B1C3 (16V)
40
60
NFM21PC225B0J3
NFM21PC475B1A3
(3)
(2)
80
0.25±0.2
(1)
100
0.1
: Electrode
1
10
Frequency (MHz)
(in mm)
■ Equivalent Circuit
100
1000
3000
■ Packaging
(1) Input
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
4000
B
Bulk(Bag)
500
Output (3)
No polarity.
GND
(2)
■ Rated Value (p: packaging code)
Capacitance
Rated Current
Rated Voltage
Insulation Resistance (min.)
Operating
Temperature Range
NFM21PC104R1E3p
0.1µF+20%-20%
2A
25Vdc
1000M ohm
-55°C to +125°C
NFM21PC224R1C3p
0.22µF+20%-20%
2A
16Vdc
1000M ohm
-55°C to +125°C
NFM21PC474R1C3p
0.47µF+20%-20%
2A
16Vdc
1000M ohm
-55°C to +125°C
NFM21PC105B1A3p
1.0µF+20%-20%
4A
10Vdc
500M ohm
-40°C to +85°C
NFM21PC105B1C3p
1.0µF+20%-20%
4A
16Vdc
500M ohm
-40°C to +85°C
NFM21PC225B0J3p
2.2µF+20%-20%
4A
6.3Vdc
200M ohm
-40°C to +85°C
NFM21PC475B1A3p
4.7µF+20%-20%
6A
10Vdc
100M ohm
-40°C to +85°C
Part Number
Number of Circuit: 1
Continued on the following page.
o This data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2009.5.1
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
Data Sheet
2
Continued from the preceding page.
■ !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2009.5.1
http://www.murata.com/