OX-405 Oven Controlled Crystal Oscillator OX-405 Features Applications • 4-Pin Dip • Fast Warm-up • Frequency Range: 80 MHZ to 120 MHZ • Low g-sensitivity • Low Phase Noise • Base Stations • Test Equipment • Synthesizers • Military Communication Equipment Performance Specifications Frequency Stabilities1 (SC-Cut Crystal-Option) Parameter Min vs. operating temperature range (referenced to +25°C) Initial tolerance vs. supply voltage change vs. load change vs. aging/day vs. aging/1st year Warm-up time Typical Max Unit Condition -200 -150 -100 -50 -35 -25 +200 +150 +100 +50 +35 +25 ppb ppb ppb ppb ppb ppb -40 to +85°C -20 to +70°C -0 to +70°C -40 to +85°C (height code 0 and 3 only) -20 to +70°C (height code 0 and 3 only) -0 to +70°C (height code 0 and 3 only) -0.2 -50 -25 -10 -3 -300 +0.2 +50 +25 +10 +3 +300 ppm ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ±5% static (height code 0 and 2) VS ±5% static (height code 1 and 3) Load ±5% static after 30 days of operation after 30 days of operation 2 minutes to ±100ppb of final frequency (1 hour reading) @ +25°C Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Supply Voltage (Vs) Parameter Supply Voltage Min Typical Max Unit 4.75 5.0 5.25 VDC 3.165 3.3 3.465 VDC 3.5 1.0 Watts Watts Power Consumption Condition during warm-up steady state @ +25°C RF Output Signal [Standard] HCMOS Load 15 pF Signal Level (Vol) 0.5 Signal Level (Voh) 4.7 Signal Level (Vol) 0.3 Signal Level (Voh) 3.0 Duty Cycle 40 VDC with Vs=5V and 15 pF Load VDC with Vs=5V and 15 pF Load VDC with Vs=3.3V and 15 pF Load VDC with Vs=3.3V and 15 pF Load % @ (Voh-Vol)/2 60 Sinewave (5V supply, height code 0 or 3 only) Load W 50 Output Power @ 5V 5 8 Harmonics 11 dBm -40 dBm 50 W load Frequency Tuning (EFC) Tuning Range ±1.0 ±3.0 ppm 5 % Linearity Tuning Slope with SC cut crystal Positive Control Voltage Range 0.0 2.0 4.0 VDC 0 1.5 3.0 VDC Additional Parameters Phase Noise3 -95 -125 -145 -155 -160 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz G-Sensitivity 0.5 ppb/g 8 g Weight 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz worst direction Absolute Maximum Ratings Supply Voltage (Vs) 6.0 V Output Load 50 pF Operable Temperature Range -55 +85 °C Storage Temperature Range -55 +125 °C @ 100MHz Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Outline Drawing / Enclosure Dimensions in inches (mm) Dimensions in mm Type A Type B Code Height “H” Pin Length “L” Min Code Height “H” Pin Length “L” Min 0 9.3 5.85 2 10.4 NA 1 8.3 5.85 3 11.4 NA Pin Connections Pin Connections 1 Electronic Frequency Control Input (EFC) 1 Electronic Frequency Control Input (EFC) 7 Ground (Case) 7 Ground (Case) 8 RF Output 8 RF Output 14 Supply Voltage Input (VS) 14 Supply Voltage Input (VS) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Standard Shipping Method Enclosure Type Type B Tape width W [mm] 44 Quantity per meter 50 Quantity per reel Dimension P 300 Recommended Reflow Profile Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com 20 Ordering Information OX - 405 0 - D A E - 107 0 - 100M0000000 Frequency Product Family OX: OCXO Frequency Control 0: No Tuning 2: ±1.0 to ±3ppm (SC) Package 405 Height 0: A9.3 mm (THT) 1: A8.3 mm (THT) 2: B10.4 mm (SMD) 3:B11.4mm (SMD) Stability Code 207: ±200ppb 157: ±150ppb 107: ±100ppb 508: ±50ppb (height code 0 and 3 only) 358: ±35ppb (height code 0 and 3 only) 258: ±25ppb (height code 0 and 3 only) Supply Voltage D: +5V E:+3.3V (HCMOS only) RF Output Code A: HCMOS E:Sinewave (height code 0 and 3 only) Temperature Range E: -40°C to +85°C J: -20°C to +70°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268.801.100 Fax: +49 (0) 7268.801.282 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 1-13-2012 dmc Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com