2SC3415S / 2SC4015 Transistors Chroma amplifier transistor (300V, 0.1A) 2SC3415S / 2SC4015 !External dimensions (Units : mm) !Features 1) High breakdown voltage. (BVCEO=300V) 2) Low collector output capacitance. (Typ. 3pF at VCB=30V) 3) Ideal for chroma circuit. 2SC3415S 2 (15Min.) 3Min. 3 4 0.45 2.5 (1) Emitter (2) Collector (3) Base 0.5 0.45 5 Unit Collector-base voltage Collector-emitter voltage VCBO VCEO 300 300 V V Emitter-base voltage Collector current VEBO IC 5 100 V mA Collector power dissipation 2SC3415S 0.3 PC 2SC4015 Junction temperature Storage temperature °C −55~+150 Tstg 2SC4015 Taping specifications 2.5 6.8 W 1 ∗ 150 Tj (1) (2) (3) 0.65Max. °C ∗ Printed circuit board 1.7mm thick, collector plating 1cm2 or larger. 0.5 4.4 Limits 0.9 Symbol 1.0 Parameter 14.5 ROHM : SPT EIAJ : SC-72 !Absolute maximum ratings (Ta=25°C) (1) (2) (3) ROHM : ATV !Packaging specifications and hFE Type Package hFE Code Basic ordering unit (pieces) ATV N TV2 2500 !Electrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current BVCBO BVCEO − − − V V V ICBO − 0.5 µA VCB=200V Emitter cutoff current Collector-emitter saturation voltage IEBO − − 0.5 2 µA V VEB=4V VCE(sat) − − − − − − IC=50µA IC=100µA BVEBO 300 300 5 56 − 180 − 56 120 − − MHz − pF 2SC3415S DC current transfer ratio 2SC4015 Gain bandwidth product Collector output capacitance hFE 1.05 0.45 (1) Emitter (2) Collector (3) Base Taping specifications 2SC3415S 2SC4015 SPT NP TP 5000 2.54 2.54 fT 50 − 100 Cob − 3 Conditions IE=50µA IC/IB=50mA/5mA VCE/IC=10V/10mA VCE=30V, IE=-10mA, f=100MHz VCB=30V, IE=0A, f=1MHz Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0