SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor® Series - DO-214 Description SIDACtor® Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards. Features and Benefits t Low voltage overshoot t Fails short circuit when surged in excess of ratings t Low on-state voltage Agency Approvals AGENCY t Does not degrade with use AGENCY FILE NUMBER E133083 t Low Capacitance Applicable Global Standards Pinout Designation Not Applicable Schematic Symbol t TIA-968-A t GR 1089 Intra-building t TIA-968-B t IEC 61000-4-5 t ITU K.20/21 Enhanced Level* t YD/T 1082 t ITU K.20/21 Basic Level t YD/T 950 t YD/T 993 t GR 1089 Inter-building* *A/B-rated parts require series resistance Electrical Characteristics Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps P0080SALRP P0220SALRP P0300SALRP P0640SALRP P0720SALRP P0900SALRP P1100SALRP P1300SALRP P1500SALRP P1800SALRP P2100SALRP P2300SALRP P2600SALRP P3100SALRP P3500SALRP P0080SBLRP P0220SBLRP P0300SBLRP P0640SBLRP P-8A P22A P03A P06A P07A P09A P11A P13A P15A P18A P21A P23A P26A P31A P35A P-8B P22B P03B P06B V min 6 15 25 58 65 75 90 120 140 170 180 190 220 275 320 6 15 25 58 V max 25 32 40 77 88 98 130 160 180 220 240 260 300 350 400 25 32 40 77 mA min 50 50 50 150 150 150 150 150 150 150 150 150 150 150 150 50 50 50 150 mA max 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 A max 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 V max 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Capacitance @1MHz, 2V bias pF min 25 25 15 40 35 25 30 25 25 25 20 25 20 20 20 25 25 15 40 pF max 150 150 140 60 60 55 50 45 40 35 35 35 35 35 35 150 150 140 80 Table continues on next page. © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 138 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Electrical Parameters (continued) Part Number Marking P0720SBLRP P0900SBLRP P1100SBLRP P1300SBLRP P1500SBLRP P1800SBLRP P2100SBLRP P2300SBLRP P2600SBLRP P3100SBLRP P3500SBLRP P0080SCLRP P0220SCLRP P0300SCLRP P0640SCLRP P0720SCLRP P0900SCLRP P1100SCLRP P1300SCLRP P1500SCLRP P1800SCLRP P2100SCLRP P2300SCLRP P2600SCLRP P3100SCLRP P3500SCLRP VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps V min V max mA min mA max A max V max pF min pF max 65 75 90 120 140 170 180 190 220 275 320 6 15 25 58 65 75 90 120 140 170 180 190 220 275 320 88 98 130 160 180 220 240 260 300 350 400 25 32 40 77 88 98 130 160 180 220 240 260 300 350 400 150 150 150 150 150 150 150 150 150 150 150 50 50 50 150 150 150 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 35 35 30 25 25 25 20 25 20 20 20 45 30 25 55 50 45 45 40 35 35 30 30 30 30 25 75 70 70 60 55 50 35 50 45 45 40 260 240 250 155 150 140 115 105 95 90 90 80 80 70 65 P07B P09B P11B P13B P15B P18B P21B P23B P26B P31B P35B P-8C P22C P03C P06C P07C P09C P11C P13C P15C P18C P21C P23C P26C P31C P35C Capacitance @1MHz, 2V bias Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional. Series Surge Ratings IPP 0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 ITSM 50/60 Hz di/dt A min A min A min A min A min A min A min A min A min A min Amps/μs max A 20 150 150 90 50 75 75 45 75 20 500 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 30 500 Notes: 1 Current waveform in μs 2 Voltage waveform in μs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$ - The device must initially be in thermal equilibrium with -40°C < TJ <¡$ © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 139 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Thermal Considerations Package Symbol Parameter Value Unit DO-214AA TJ Operating Junction Temperature Range UP °C TS Storage Temperature Range UP °C R0JA Thermal Resistance: Junction to Ambient 90 °C/W V-I Characteristics tr x td Pulse Waveform IPP – Peak Pulse Current – %IPP +I IT IS IH IDRM -V +V VT VDRM VS tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t – Time (μs) -I Normalized DC Holding Current vs. Case Temperature Normalized VS Change vs. Junction Temperature 2.0 IH 10 8 6 25 °C 4 IH (TC = 25ºC) 12 Ratio of Percent of VS Change – % 14 2 0 -4 -6 1.8 1.6 1.4 25°C 1.2 1.0 0.8 0.6 0.4 -8 -40 -20 0 -40 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC 140 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters Pb-Free assembly (see Fig. 1) ¡$ ¡$ 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) ¡$ - Temperature (tL) 60-150 secs. Peak Temp (TP) ¡$ Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed ¡$ Figure 1 TP tP Critical Zone TL to TP Ramp-up Temperature Reflow Condition TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Physical Specifications Environmental Specifications Lead Material Copper Alloy High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS¡$ 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated Temp Cycling ¡$UP¡$NJOEXFMMVQUP cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC¡$ 3)VQUPIST&*" JEDEC, JESD22-A-101 High Temp Storage ¡$IST.*-45%.FUIPE JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP¡$NJOEXFMMTFDUSBOTGFS 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) ¡$3)BUNVQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat ¡$TFDT.*-45%.FUIPE Moisture Sensitivity Level 3)¡$ISTSFnPXDZDMFT ¡$1FBL +&%&$+45%-FWFM UL recognized epoxy meeting flammability classification 94V-0 Body Material Part Numbering Part Marking P xxx 0 S x L RP TYPE P = SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE Pxxx xxxxx REEL PACK RoHS COMPLIANT IPP RATING PACKAGE TYPE © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 141 Revised: February 22, 2011 Part Marking Code (Refer to Electrical Characteristics Table) Date Code SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Dimensions — DO-214AA Pad Outline Case Temperature Measurement Point B D 0.110 (2.8) C A 0.079 (2.0) H E Dimensions 0.079 (2.0) inch (millimeter) F K G Inches Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1.95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1.60 F 0.075 0.096 1.90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1.95 2.65 K 0.006 0.016 0.15 0.41 Packing Options Package Type S Description Quantity Added Suffix Industry Standard DO-214AA Tape & Reel Pack 2500 RP EIA-481-D Tape and Reel Specification — DO-214AA 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.059 DIA (1.5) 12.99 (330.0) Direction of Feed 0.49 (12.4) © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Cover tape Dimensions are in inches (and millimeters). 0.512 (13.0) Arbor Hole Dia. Millimeters 142 Revised: February 22, 2011