PR058A THRU PR320A SIDACTOR FEATURES * * * * * * Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability CELL .006 (0.15) .002 (0.05) MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Metallurgically bonded construction Mounting position: Any .102 (2.6) .087 (2.2) .114 (2.9) .098 (2.5) .165 (4.2) .150 (3.8) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Off-state Capacitance (Note 1) Peak One-Cycle Surge Current (Note 2) SYMBOL PR058A PR065A CO PR075A PR160A PR190A 85 PR220A PR275A 38 I TSM PR320A 35 UNITS pF 50 Amps ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL PR058A PR065A PR075A PR160A PR190A PR220A PR275A 58 65 75 160 190 220 275 320 V 77 88 98 220 260 300 350 400 V Peak Off-state Voltage @I DRM = 5uA Switching Voltage @I S = 800mA (Note 3) VDRM VS Minimum On-state Voltage at 1.0A VT 4 Holding Current IH 150 NOTES : 1. 2. 3. 4. Off-state capacitance is measured at 10KHz @0.3V with a DC48V bias. Surge rating test standard : 10/100uS. Vs is measured at 100V/uS. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. PR320A UNITS Volts mA 2007-11 RATING AND CHARACTERISTICS CURVES ( PR058A THRU PR320A ) IT IS IH IDRM -V VT VDRM VS +V IPP, PEAK PULSE CURRENT, (% IPP) +I 100 50 0 -I tr td t, TIME, (uS) FIG.1 V-I CHARACTERISTICS FIG.2 PULSE WAVE-FORM 12 2.0 10 1.8 RATIO OF I (T =25OC) H C 8 6 IH PERCENT OF VS CHANGE, (%) 14 4 2 25 C O 0 -2 -4 1.4 1.2 25 OC 1.0 0.8 0.6 0.4 -6 -8 -40 1.6 -20 0 20 40 60 80 100 120 140 160 TJ, JUNCTION TEMPERATURE, (OC) FIG.3 NORMALIZED VS CHANGE vs. JUNCTION TEMPERATURE -40 -20 0 20 40 60 80 100 120 140 160 CASE TEMPERATURE, (OC) FIG.4 NORMALIZED DC HOLDING CURRENT vs. CASE TEMPERATURE DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.